The effect of Ag substitution on physicochemical and biological properties of sol-gel derived 60%SiO2–31%CaO–4%P2O5–5%Li2O (mol%) quaternary bioactive glass

Author(s):  
Mohsen Rahmani ◽  
Amirhossein Moghanian ◽  
Morteza Saghafi Yazdi
2021 ◽  
Vol 560 ◽  
pp. 120732
Author(s):  
Amirhossein Moghanian ◽  
Saba Nasiripour ◽  
Seyed Mohammad Hosseini ◽  
Seyed Hesamedin Hosseini ◽  
Ali Rashvand ◽  
...  

2013 ◽  
Vol 102 (7) ◽  
pp. 2383-2394 ◽  
Author(s):  
Justyna Pawlik ◽  
Magdalena Widziołek ◽  
Katarzyna Cholewa-Kowalska ◽  
Maria Łączka ◽  
Anna Maria Osyczka

2014 ◽  
Vol 631 ◽  
pp. 30-35 ◽  
Author(s):  
S. Solgi ◽  
M. Shahrezaee ◽  
A. Zamanian ◽  
T.S. Jafarzadeh Kashi ◽  
Majid Raz ◽  
...  

Bioactive glass of the type CaO–SrO–P2O5–SiO2was obtained by the sol-gel processing method. Three samples containing 0 mol%, 5 mol% and 10 mol% of SrO were synthesized. The obtained bioactive glasses were characterized by the techniques such as, X-ray diffraction (XRD) and scanning electron microscope (SEM) and the effect of SrO/CaO substitution on in vitro biological properties of the synthesized glasses were evaluated and biocompatibility of the samples was measured using MTT assay. The results showed that incorporation of Sr in the obtained glass network did not result in any structural alteration of it due to the similar role of SrO compared with that of CaO. In vitro experiments with human osteosarcoma cell lines (MG-63) and MTT assay indicated that bioactive glass incorporating 5 mol% of Sr in the composition is non-toxic and revealed good biocompatibility.


2015 ◽  
Vol 3 (8) ◽  
pp. 1612-1623 ◽  
Author(s):  
Shichang Zhao ◽  
Jianhua Zhang ◽  
Min Zhu ◽  
Yadong Zhang ◽  
Zhongtang Liu ◽  
...  

Functionalization of biomaterials with specific functional groups is one of the most straightforward strategies to induce specific cell responses to biomaterials.


RSC Advances ◽  
2014 ◽  
Vol 4 (43) ◽  
pp. 22678-22687 ◽  
Author(s):  
Qing Hu ◽  
Yuli Li ◽  
Guohou Miao ◽  
Naru Zhao ◽  
Xiaofeng Chen

Monodispersed mesoporous bioactive glass sub-micron spheres with a controllable size and good biocompatibility were fabricated by an improved sol–gel method.


Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1843
Author(s):  
Kyung-Hyeon Yoo ◽  
Yong-Il Kim ◽  
Seog-Young Yoon

Calcium silicate-based cement has been widely used for endodontic repair. However, it has a long setting time and needs to shorten setting time. This study investigated the effects of magnesium (Mg) ion on the setting reaction, mechanical properties, and biological properties of calcium silicate cement (CSC). Sol-gel route was used to synthesize Mg ion-doped calcium silicate cement. Synthesized cement was formulated with the addition of different contents of Mg ion, according to 0, 1, 3, 5 mol% of Mg ion-doped calcium silicate. The synthesized cements were characterized with X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). We also evaluated the physicochemical and biological properties of cement, such as the setting time, compressive strength, micro-hardness, simulated body fluid (SBF) immersion, cytotoxicity, and cell differentiation tests. As a result, the Mg ion improves the hydration properties of calcium silicate cement, and the setting time is reduced by increasing the amounts of Mg ion. However, the mechanical properties deteriorated with increasing Mg ion, and 1 and 3 mol% Mg-doped calcium silicate had appropriate mechanical properties. Also, the results of biological properties such as cytotoxicity, ALP activity, and ARS staining improved with Mg ion. Consequently, the optimal condition is 3 mol% of Mg ion-doped calcium silicate (3%Mg-CSC).


2013 ◽  
Vol 467 ◽  
pp. 64-69 ◽  
Author(s):  
Nader Nezafati ◽  
Saeed Hesaraki ◽  
Mohammad-Reza Badr-Mohammadi

In the present research, strontium containing nanobioactive glass (NBG-Sr) was synthesized by sol-gel method. The morphology was analyzed by transmission electron microscope (TEM). Different amounts (0.5 to 5 wt%) of NBG-Sr were then added to biphasic calcium phosphate (BCP). They were sintered at different temperatures, i.e., 1100, 1200 and 1300 °C and changes in physical and mechanical properties were investigated. A sharp decrease in pore volume was observed as the temperature increased. The maximum bending strength (~45 MPa) was achieved for BCP which was mixed with 3 wt% NBG-Sr and sintered at 1200 °C. This value was approximately the same when it was sintered at 1300 °C. The bending strength failed when both lower and higher amounts of 3 wt% NBG-Sr were utilized. Therefore, sintering of composites at 1200 °C was economically reasonable. The X-ray results showed that NBG-Sr additive did not change the phase composition of BCP when it was heat treated at 1200 °C. The attachment and proliferation of rat calvarium-derived osteoblasts on samples sintered at 1200 °C were also evaluated by scanning electron microscopy (SEM). Based on cell studies, all NBG-Sr-added BCPs supported attachment and proliferation of osteoblastic cells. Overall, biphasic calcium phosphate materials with improved mechanical and biological properties can be produced by using certain quantity of strontium-containing bioactive glass particles.


Sign in / Sign up

Export Citation Format

Share Document