Hydroxyapatite forming ability, ion release and antibacterial activity of the melt-derived SiO2–P2O5–Na2O–CaO–F glasses modified by replacing CaO with SrO and ZnO

Author(s):  
Cui Li ◽  
Lidan Liu ◽  
Ziyou Zhou ◽  
Taoyong Liu ◽  
Shiying Zhang ◽  
...  
Coatings ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 561 ◽  
Author(s):  
Seiji Yamaguchi ◽  
Phuc Thi Minh Le ◽  
Morihiro Ito ◽  
Seine A. Shintani ◽  
Hiroaki Takadama

The main problem of orthopedic and dental titanium (Ti) implants has been poor bone-bonding to the metal. Various coatings to improve the bone-bonding, including the hydroxyapatite and titania, have been developed, and some of them have been to successfully applied clinical use. On the other hand, there are still challenges to provide antibacterial activity and promotion of bone growth on Ti. It was shown that a calcium-deficient calcium titanate coating on Ti and its alloys exhibits high bone-bonding owing to its apatite formation. In this study, Sr and Ag ions, known for their promotion of bone growth and antibacterial activity, were introduced into the calcium-deficient calcium titanate by a three-step aqueous solution treatment combined with heat. The treated metal formed apatite within 3 days in a simulated body fluid and exhibited antibacterial activity to Escherichia coli without showing any cytotoxicity in MC3T3-E1 preosteoblast cells. Furthermore, the metal slowly released 1.29 ppm of Sr ions. The Ti with calcium-deficient calcium titanate doped with Sr and Ag will be useful for orthopedic and dental implants, since it should bond to bone because of its apatite formation, promote bone growth due to Sr ion release, and prevent infection owing to its antibacterial activity.


2020 ◽  
Vol 8 (3) ◽  
pp. 406-415 ◽  
Author(s):  
Tingting Yang ◽  
Donghui Wang ◽  
Xuanyong Liu

The polydopamine containing Zn element as an ion carrier and heat-induced release film on GNRs-Ti surface enhanced the antibacterial properties.


Author(s):  
Minna Vaahtio ◽  
Eveliina Munukka ◽  
Outi Leppäranta ◽  
Di Zhang ◽  
Erkki Eerola ◽  
...  

2021 ◽  
Author(s):  
Mona Kalati ◽  
Kamran Akhbari

An excellent feature of [ZnO]0.181@ZIF-8 is its slower release of Zn2+ ions as compared to Zn(CH3COO)2.2H2O.


2014 ◽  
Vol 30 (8) ◽  
pp. 891-901 ◽  
Author(s):  
Chen Chen ◽  
Michael D. Weir ◽  
Lei Cheng ◽  
Nancy J. Lin ◽  
Sheng Lin-Gibson ◽  
...  

2019 ◽  
Vol 9 (22) ◽  
pp. 4918 ◽  
Author(s):  
Hyo-Kyung Song ◽  
Kyung-Hyeon Yoo ◽  
Seog-Young Yoon ◽  
Hee Sam Na ◽  
Jin Chung ◽  
...  

White spot lesions (WSL) that occur on teeth after orthodontic appliances have been attached are caused by bacterial demineralization of the enamel surface. This study investigated the anti-demineralization effect of orthodontic resins containing mesoporous bioactive glass nanoparticles (MBN) doped with gallium, which has antibacterial activity, as well as MBN with increased calcium and phosphate contents as these ions can remineralize enamel. Resins (CF, CharmFill Flow, Dentkist, Seoul, South Korea) containing 1%, 3%, and 5% Ga-doped MBN (GaMBN) were characterized using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and isothermal tests, and their physical properties were measured in terms of Vickers microhardness, bracket retention force, and adhesive remnant index (ARI). Cell viability in the resins was confirmed by testing human dental pulp stem cells (hDPSCs), and ion release tests were performed after 1, 7, and 14 days to determine whether the resins released Ga3+, Ca2+, and PO43–. After 14 days, antibacterial activity was determined using Streptococcus mutans (S. mutans)—the bacteria that causes tooth decay—and the chemical remineralization effect was investigated using a cycle of acid–base solutions. The microhardness of the resins increased with GaMBN concentration whereas their bracket retention force, ARI, and cell viability remained unchanged. The bacterial activity of the 5%-GaMBN resin decreased after 24 and 48 h; however, the change in activity was not statistically significant. Anti-demineralization testing demonstrated that the degree of enamel demineralization decreased as the GaMBN concentration increased, which indicates that resins containing 5%-GaMBN may be viable orthodontic adhesives for preventing WSLs.


Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1813 ◽  
Author(s):  
Hyung-Jin Nam ◽  
You-Min Kim ◽  
Yong Hoon Kwon ◽  
Kyung-Hyeon Yoo ◽  
Seog-Young Yoon ◽  
...  

Orthodontic treatment involving the bonding of fixed appliances to tooth surfaces can cause white spot lesions (WSLs). WSLs increase the likelihood of cavity formation and hence require preservation and prosthetic restoration. Therefore, the prevention of WSLs is of greater importance than treatment. Application of fluoride or the use of fluoride-containing mouthwash can prevent WSLs, but this requires patient cooperation and additional time and cost. Bioactive glass containing 2.5% fluoride was synthesized and mixed with the orthodontic bonding adhesive Transbond XT Low Flow (LV) at ratios of 1, 3, and 5% to prepare orthodontic adhesive samples. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the samples. The Vickers hardness test, bracket retention test, and adhesive remnant index (ARI) of the samples were analysed to determine their mechanical properties. To determine the biological cytotoxicity, the cell activity of the samples was evaluated using cell viability tests and the antibacterial activity was analysed using Streptococcus mutans. To evaluate the anti-demineralization effect, the sample was bonded to extracted teeth and a pH cycle test was performed. Micro computed tomography data were obtained from the bonded teeth and sample, and the anti-demineralization effect was evaluated using the ImageJ software program. The Vickers hardness of the sample was higher than that of LV and was dependent on the concentration of fluoride-containing bioactive glass (FBAG). The bracket retention test and ARI of the sample showed no significant differences from those of LV. The cell viability test showed no significant changes at 24 and 48 h after application of the sample. The fluoride ion release test indicated an ion release rate of 9.5–17.4 μg/cm2. The antibacterial activity of the experimental group containing FBAG was significantly higher than that of the LV group. The anti-demineralization test showed a concentration-dependent increase. However, the resin containing 5 mass% FBAG (FBAG5) showed a statistically-significant increase compared with LV. The orthodontic adhesive containing FBAG showed antibacterial and anti-demineralization effects, thus indicating possible WSL prevention activity.


2016 ◽  
Vol 50 (30) ◽  
pp. 4279-4289 ◽  
Author(s):  
Nuray Kizildag ◽  
Nuray Ucar

In this study, silver nitrate was added to polyacrylonitrile filament structure and chemical reduction was applied to composite filaments in order to develop multifunctional polyacrylonitrile filaments with electrostatic dissipative and antibacterial properties. Composite filaments of polyacrylonitrile and silver nitrate were characterized and evaluated in terms of morphology, chemical structure, tensile properties, crystallinity, conductivity, thermal properties, silver ion release behaviour and antibacterial activity. Additionally, ultraviolet-visible spectroscopy was used to confirm the formation of nanoparticles and the variation in the concentration of the nanoparticles with the application of the chemical reduction process. Scanning electron microscope images and ultraviolet-visible spectroscopy results confirmed the formation of nanoparticles in the filament structure. Breaking strength and breaking elongation increased at silver nitrate content of 1%. Composite filaments displayed improved thermal stability and their conductivities were in the semiconductive range. Atomic absorption spectroscopy confirmed that necessary amounts of silver release for antibacterial activity occurred, while the antibacterial activity analysis showed that the composite filaments have excellent antibacterial activity. The results obtained were promising and showed that the composite filaments could be used in electrostatic dissipative and antibacterial applications.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Andreas Koutroulis ◽  
Sarah A. Kuehne ◽  
Paul R. Cooper ◽  
Josette Camilleri

AbstractTricalcium silicate (TCS)-based materials produce calcium hydroxide as a byproduct of their hydration reaction. The present study investigated whether calcium ion release (CIR) affects their biological and antimicrobial properties when used as pulp protection materials. The effect of incorporation of micro-silica and calcium phosphate monobasic to radiopacified TCS-based materials was investigated. The commercial TCS-based Biodentine, Bio-C Pulpo, TotalFill Root Repair Material, TheraCal LC and a base/liner- ACTIVA BioACTIVE (Activa) were also evaluated. The hydration and CIR were monitored and correlated with biocompatibility and antimicrobial assessment of eluates. Overall, the additives altered the hydration and leaching profile of the prototype cements. The micro-silica inclusion resulted in a decreased long-term calcium hydroxide formation which was associated with neutralised cytotoxicity and antibacterial activity. Calcium phosphate did not alter the leaching profile, although a stronger antibacterial effect was induced. The commercial materials also had different CIR profiles. The water-based ones had higher CIR, and this was associated with stronger antimicrobial effect but not enhanced biological activity. Both TheraCal LC and Activa exhibited poor degree of conversion, low CIR, acceptable biocompatibility and moderate antibacterial activity. A positive correlation of CIR with antibacterial effectiveness was observed (0.3 < r < 0.49; p = 0.021, p = 0.011 for the two test bacterial cultures). No relation was shown between CIR and cytotoxicity (0.3 < r < 0.49; p = 0.150, p = 0.068 for the two cell cultures studied). The additives modified the CIR. The antimicrobial properties were dependent on the CIR; the cytotoxicity of the materials was unaffected.


Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2311
Author(s):  
Myung-Jin Lee ◽  
Young-Bin Seo ◽  
Ji-Young Seo ◽  
Jeong-Hyun Ryu ◽  
Hyo-Ju Ahn ◽  
...  

Flowable resins used for dental restoration are subject to biofilm formation. Zinc has antibacterial properties. Thus, we prepared a zinc-doped phosphate-based glass (Zn-PBG) to dope a flowable resin and evaluated the antibacterial activity of the composite against Streptococcus mutans (S. mutans) to extrapolate the preventative effect toward secondary caries. The composites were prepared having 0 (control), 1.9, 3.8, and 5.4 wt.% Zn-PBG. The flexural strength, elastic modulus, microhardness, depth of cure, ion release, inhibition zone size, and number of colony-forming units were evaluated and analyzed using ANOVA. The flexural strength of the control was significantly higher than those of Zn-PBG samples (p < 0.05). However, all samples meet the International Standard, ISO 4049. The microhardness was not significantly different for the control group and 1.9 and 3.8 wt.% groups, but the 5.4 wt.% Zn-PBG group had a significantly lower microhardness (p < 0.05). Further, the composite resins increasingly released P, Ca, Na, and Zn ions with an increase in Zn-PBG content (p < 0.05). The colony-forming unit count revealed a significant reduction in S. mutans viability (p < 0.05) with increase in Zn-PBG content. Therefore, the addition of Zn-PBG to flowable composite resins enhances antibacterial activity and could aid the prevention of secondary caries.


Sign in / Sign up

Export Citation Format

Share Document