scholarly journals Tri-Functional Calcium-Deficient Calcium Titanate Coating on Titanium Metal by Chemical and Heat Treatment

Coatings ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 561 ◽  
Author(s):  
Seiji Yamaguchi ◽  
Phuc Thi Minh Le ◽  
Morihiro Ito ◽  
Seine A. Shintani ◽  
Hiroaki Takadama
Keyword(s):  
Antibacterial Activity ◽  
Body Fluid ◽  
Bone Growth ◽  
Solution Treatment ◽  
Calcium Titanate ◽  
The Other ◽  
Apatite Formation ◽  
Clinical Use ◽  
Ion Release ◽  
High Bone

The main problem of orthopedic and dental titanium (Ti) implants has been poor bone-bonding to the metal. Various coatings to improve the bone-bonding, including the hydroxyapatite and titania, have been developed, and some of them have been to successfully applied clinical use. On the other hand, there are still challenges to provide antibacterial activity and promotion of bone growth on Ti. It was shown that a calcium-deficient calcium titanate coating on Ti and its alloys exhibits high bone-bonding owing to its apatite formation. In this study, Sr and Ag ions, known for their promotion of bone growth and antibacterial activity, were introduced into the calcium-deficient calcium titanate by a three-step aqueous solution treatment combined with heat. The treated metal formed apatite within 3 days in a simulated body fluid and exhibited antibacterial activity to Escherichia coli without showing any cytotoxicity in MC3T3-E1 preosteoblast cells. Furthermore, the metal slowly released 1.29 ppm of Sr ions. The Ti with calcium-deficient calcium titanate doped with Sr and Ag will be useful for orthopedic and dental implants, since it should bond to bone because of its apatite formation, promote bone growth due to Sr ion release, and prevent infection owing to its antibacterial activity.

scholarly journals Iodine-Loaded Calcium Titanate for Bone Repair with Sustainable Antibacterial Activity Prepared by Solution and Heat Treatment

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2199
Author(s):  
Seiji Yamaguchi ◽  
Phuc Thi Minh Le ◽  
Seine A. Shintani ◽  
Hiroaki Takadama ◽  
Morihiro Ito ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Antibacterial Activity ◽  
Bone Repair ◽  
Reduction Rate ◽  
Calcium Titanate ◽  
Apatite Formation ◽  
Oh Groups ◽  
Long Term Stability ◽  
Combined Solution

In the orthopedic and dental fields, simultaneously conferring titanium (Ti) and its alloy implants with antibacterial and bone-bonding capabilities is an outstanding challenge. In the present study, we developed a novel combined solution and heat treatment that controllably incorporates 0.7% to 10.5% of iodine into Ti and its alloys by ion exchange with calcium ions in a bioactive calcium titanate. The treated metals formed iodine-containing calcium-deficient calcium titanate with abundant Ti-OH groups on their surfaces. High-resolution XPS analysis revealed that the incorporated iodine ions were mainly positively charged. The surface treatment also induced a shift in the isoelectric point toward a higher pH, which indicated a prevalence of basic surface functionalities. The Ti loaded with 8.6% iodine slowly released 5.6 ppm of iodine over 90 days and exhibited strong antibacterial activity (reduction rate >99%) against methicillin-resistant Staphylococcus aureus (MRSA), S. aureus, Escherichia coli, and S. epidermidis. A long-term stability test of the antibacterial activity on MRSA showed that the treated Ti maintained a >99% reduction until 3 months, and then it gradually decreased after 6 months (to a 97.3% reduction). There was no cytotoxicity in MC3T3-E1 or L929 cells, whereas apatite formed on the treated metal in a simulated body fluid within 3 days. It is expected that the iodine-carrying Ti and its alloys will be particularly useful for orthopedic and dental implants since they reliably bond to bone and prevent infection owing to their apatite formation, cytocompatibility, and sustainable antibacterial activity.

scholarly journals Apatite-Forming Ability of Flowable vs. Putty Formulations of Newly Developed Bioactive Glass-Containing Endodontic Cement

2021 ◽  
Vol 11 (19) ◽  
pp. 8969
Author(s):  
Naoki Edanami ◽  
Razi Saifullah Ibn Belal ◽  
Shoji Takenaka ◽  
Kunihiko Yoshiba ◽  
Nagako Yoshiba ◽  
...  
Keyword(s):  
Calcium Ions ◽  
Calcium Ion ◽  
Body Fluid ◽  
Apatite Formation ◽  
Ion Release ◽  
Phosphate Ion ◽  
Phosphate Ions ◽  
Ability Levels ◽  
Consumption Rates ◽  
The Media

This study compared the apatite-forming ability (AFA) levels of flowable and putty formulations of Nishika Canal Sealer BG Multi (F-NBG and P-NBG, respectively) and attempted to clarify the cause of differences in the AFA levels of F-NBG and P-NBG. NBG samples were aged in simulated body fluid (SBF) or 1-, 5-, or 10-g/L bovine serum albumin-containing SBF (BSA-SBF) and analyzed in terms of their ultrastructures, elemental compositions, and Raman spectra to identify apatite formation. The phosphate ion consumption rates of NBG samples in the media were evaluated as an indicator of apatite growth. The original elemental composition, calcium ion release, and alkalizing ability levels of F-NBG and P-NBG were also evaluated. Apparent apatite formation was detected on all NBG samples except F-NBG aged in 10-g/L BSA-SBF. P-NBG consumed phosphate ions faster than F-NBG. As-prepared P-NBG showed more silicon elements on its surface than as-prepared F-NBG. P-NBG released more calcium ions than F-NBG, although their alkalizing ability levels did not differ statistically. In conclusion, the AFA of P-NBG was greater than that of F-NBG, probably because of the greater ability of P-NBG to expose silanol groups on the surface and release calcium ions.

scholarly journals Improved bioactivity of GUMMETAL®, Ti59Nb36Ta2Zr3O0.3, via formation of nanostructured surfaces

2018 ◽  
Vol 9 ◽  
pp. 204173141877417 ◽  
Author(s):  
Shiva Kamini Divakarla ◽  
Seiji Yamaguchi ◽  
Tadashi Kokubo ◽  
Dong-Wook Han ◽  
Jae Ho Lee ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Cell Attachment ◽  
Cell Number ◽  
Calcium Titanate ◽  
Apatite Formation ◽  
X Ray ◽  
Nanostructured Surfaces ◽  
Implant Integration

The leading reason for implant revision surgery globally is lack of implant integration with surrounding bone. A new titanium alloy GUMMETAL® (Ti59Nb36Ta2Zr3O0.3) is currently used in biomedical devices and has a Young’s modulus that is better matched to bone. The surface was subject to NaOH, CaCl2, heat and water treatment (BioGum) after which the surfaces were evaluated using atomic force microscope, scanning electron microscope, X-ray diffractometer and elemental analysis using energy dispersive X-ray. To demonstrate enhanced bone bonding ability and cytocompatibility, apatite formation in simulated body fluid and in vitro stem cell attachment, proliferation and cytoskeleton organisation were examined. The formation of a ~200 nm nanoscale needle-like calcium titanate network on the surface following treatment was revealed and upon soaking in simulated body fluid, the formation of a ~5 µm layer of apatite. Metabolic activity of rat bone marrow stem cells on BioGum was increased in comparison to control and the cell number appeared greater, with more elongated morphology as early as 2 h post-seeding. This positions the modification as a simple and potentially universal technology for the improvement of implant integration.

Chemical and Heat Treatments for Inducing Bone-Bonding Ability of Ti-6Al-4V Pedicle Screw

2014 ◽  
Vol 631 ◽  
pp. 225-230 ◽  
Author(s):  
Seiji Yamaguchi ◽  
Koji Akeda ◽  
Koichiro Murata ◽  
Norihiko Takegami ◽  
Mikinobu Goto ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Surface Layer ◽  
Pedicle Screw ◽  
Body Fluid ◽  
Spinal Instrumentation ◽  
Heat Treatments ◽  
Calcium Titanate ◽  
Apatite Formation ◽  
Beagle Dogs ◽  
Bone Contact

Pedicle screw (PS) system using Ti-6Al-4V PSs became popular in spinal instrumentation system. However, they sometimes case loosening and back-out from bone because of their poor bone-bonding ability. In the present study, Ti-6Al-4V alloy was subjected to the acid-heat or calcium-heat treatments that are effective for inducing high capacities of apatite formation and bone bonding on pure Ti. When the alloy was subjected to the acid-heat treatment, a surface layer composed of rutile and anatase TiO2 enriched with Al and V was produced. Thus the treated alloy was neutrally charged and did not form apatite in a simulated body fluid (SBF) even after 3 day. In contrast, when the alloy was subjected to the Ca-heat treatment, a surface layer composed of calcium titanate, anatase and rutile free from Al and V was produced. The treated alloy formed apatite in SBF within 3 days. When the Ti-6Al-4V PSs subjected to the Ca-heat treatment was implanted into vertebra of beagle dogs, they showed higher bone-bonding ability as well as bone contact area than those without the treatment. This kind of bioactive Ti-6Al-4V PSs might be useful for spinal instrumentation since they could prevent loosening and back-out from bone.

scholarly journals The Influence of Na and Ti on theIn VitroDegradation and Bioactivity in 58S Sol-Gel Bioactive Glass

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Shirong Ni ◽  
Ruilin Du ◽  
Siyu Ni
Keyword(s):  
Activation Energy ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Sol Gel ◽  
Apatite Formation ◽  
Ion Release ◽  
Buffer Solution ◽  
Bioactive Glasses ◽  
Initial Stage

The aim of this study was to investigate the effect of Na and Ti on thein vitrodegradation and bioactivity in the 58S bioactive glass. The degradation was evaluated through the activation energy of Si ion release from bioactive glasses and the weight loss of bioactive glasses in Tris-HCl buffer solution. Thein vitrobioactivity of the bioactive glasses was investigated by analysis of apatite-formation ability in the simulated body fluid (SBF). The results showed that Na in the 58S glass accelerated the dissolution rate of the glass, whereas Ti in the 58S glass slowed down the rate of glass solubility. Bioactivity tests showed that Na in glass increased the apatite-forming ability in SBF. In contrast, Ti in glass retards the apatite formation at the initial stage of SBF soaking but does not affect the growth of apatite after long periods of soaking.

Apatite Formation Behavior on Tricalcium Phosphate (TCP) Porous Body in a Simulated Body Fluid

2006 ◽  
Vol 309-311 ◽  
pp. 251-254 ◽  
Author(s):  
Tomohiro Uchino ◽  
Chikara Ohtsuki ◽  
Masanobu Kamitakahara ◽  
Masao Tanihara ◽  
Toshiki Miyazaki
Keyword(s):  
Simulated Body Fluid ◽  
Tricalcium Phosphate ◽  
Porous Body ◽  
Body Fluid ◽  
The Other ◽  
Apatite Formation ◽  
Other Hand ◽  
Tcp Phases ◽  
Formation Behavior ◽  
Low Porosity

Apatite formation behavior of tricalcium phosphate (TCP) ceramics with different phases and porosity was investigated in a simulated body fluid (SBF, Kokubo solution). The pure α-TCP with 80% porosity did not form hydroxyapatite (HAp) on its surface after soaking in SBF for 7 days. On the other hand, the pure α-TCP with 20% porosity formed HAp on its surface after soaking in SBF within 7 days, and the biphasic TCP, which consisted of mixture of α-TCP and β-TCP and had 20% porosity, formed HAp within 1 day. The low porosity and coexistence of α-TCP and β-TCP phases in TCP ceramics were effective for apatite formation in SBF.

Antibacterial Activity of Thujaoccidentalis,ThujaorientalisandChamaecyparisobtusa

2017 ◽  
Vol 8 (03) ◽  
Author(s):  
Kyoung- Sun Seo ◽  
Seong Woo Jin ◽  
Seongkyu Choi ◽  
Kyeong Won Yun
Keyword(s):  
Staphylococcus Aureus ◽  
Antibacterial Activity ◽  
Antibacterial Agent ◽  
Methanol Extract ◽  
The Other ◽  
Diffusion Method ◽  
E Coli ◽  
Agar Diffusion ◽  
Agar Diffusion Method ◽  
Crude Methanol Extract

The antibacterial activity of three Cupressaceae plants (Thujaoccidentalis,ThujaorientalisandChamaecyparisobtusa) was tested against three bacteria using the agar diffusion method. The ether and ethylacetate fraction of crude methanol extract from the three plants showed potent antibacterial activity against the tested microorganisms. The result showed that Staphylococcus aureus revealed the most sensitivity among the tested bacteria. Thujaoccidentalisether fraction and Thujaorientalis hexane fraction exhibited the highest antibacterial activity against Staphylococcus aureus. E. coli was shown the highest MIC values compared to the other two tested bacteria, which indicates the lowest antibacterial activity against the bacterium. This study promises an interesting future for designing a potentially active antibacterial agent from the three Cupressaceae plants.

Clinical Use of Toxic Proteins and Peptides from Tian Hua Fen and Scorpion Venom

2019 ◽  
Vol 20 (3) ◽  
pp. 285-295
Author(s):  
Chen Ling ◽  
Yuanhui Zhang ◽  
Jun Li ◽  
Wenli Chen ◽  
Changquan Ling
Keyword(s):  
Herbal Medicines ◽  
Scorpion Venom ◽  
The Other ◽  
Western World ◽  
Chinese Government ◽  
Clinical Use ◽  
Potential Benefits ◽  
Scientific Results ◽  
Proteins And Peptides ◽  
Toxic Proteins

Traditional Chinese Medicine (TCM) has been practiced in China for thousands of years. As a complementary and alternative treatment, herbal medicines that are frequently used in the TCM are the most accepted in the Western world. However, animal materials, which are equally important in the TCM practice, are not well-known in other countries. On the other hand, the Chinese doctors had documented the toxic profiles of hundreds of animals and plants thousand years ago. Furthermore, they saw the potential benefits of these materials and used their toxic properties to treat a wide variety of diseases, such as heavy pain and cancer. Since the 50s of the last century, efforts of the Chinese government and societies to modernize TCM have achieved tremendous scientific results in both laboratory and clinic. A number of toxic proteins have been isolated and their functions identified. Although most of the literature was written in Chinese, this review provide a summary, in English, regarding our knowledge of the clinical use of the toxic proteins isolated from a plant, Tian Hua Fen, and an animal, scorpion, both of which are famous toxic prescriptions in TCM.

Preparation of bioactive and antibacterial PMMA-based bone cement by modification with quaternary ammonium and alkoxysilane

2021 ◽  
pp. 088532822110044
Author(s):  
Haiyang Wang ◽  
Toshinari Maeda ◽  
Toshiki Miyazaki
Keyword(s):  
Antibacterial Activity ◽  
Methyl Methacrylate ◽  
Bone Cement ◽  
Setting Time ◽  
Antibacterial Properties ◽  
The Body ◽  
Apatite Formation ◽  
Gram Positive ◽  
E Coli ◽  
Gram Positive Bacteria

Bone cement based on poly(methyl methacrylate) (PMMA) powder and methyl methacrylate (MMA) liquid is a very popular biomaterial used for the fixation of artificial joints. However, there is a risk of this cement loosening from bone because of a lack of bone-bonding bioactivity. Apatite formation in the body environment is a prerequisite for cement bioactivity. Additionally, suppression of infection during implantation is required for bone cements to be successfully introduced into the human body. In this study, we modified PMMA cement with γ-methacryloxypropyltrimetoxysilane and calcium acetate to introduce bioactive properties and 2-( tert-butylamino)ethyl methacrylate (TBAEMA) to provide antibacterial properties. The long-term antibacterial activity is attributed to the copolymerization of TBAEMA and MMA. As the TBAEMA content increased, the setting time increased and the compressive strength decreased. After soaking in simulated body fluid, an apatite layer was detected within 7 days, irrespective of the TBAEMA content. The cement showed better antibacterial activity against Gram-negative E. Coli than Gram-positive bacteria; however, of the Gram-positive bacteria investigated, B. subtilis was more susceptible than S. aureus.

Sign in / Sign up

Export Citation Format

Share Document