Conditions giving rise to intense visible room temperature photoluminescence in SrWO4 thin films: the role of disorder

2005 ◽  
Vol 312 (1-3) ◽  
pp. 1-9 ◽  
Author(s):  
E. Orhan ◽  
M. Anicete-Santos ◽  
M.A.M.A. Maurera ◽  
F.M. Pontes ◽  
C.O. Paiva-Santos ◽  
...  
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Room Temperature Photoluminescence

Degradation in a Methyl-phenyl Co-Polymeric Polysilane for LED Applications

2003 ◽  
Vol 769 ◽  
Author(s):  
Asha Sharma ◽  
Deepak ◽  
Monica Katiyar ◽  
Satyendra Kumar ◽  
V. Chandrasekhar ◽  
...  
Keyword(s):  
Thin Films ◽  
Molecular Weight ◽  
Light Source ◽  
Room Temperature ◽  
Light Exposure ◽  
Room Temperature Photoluminescence ◽  
Pl Spectrum ◽  
Pl Intensity ◽  
Methyl Phenyl

AbstractThe optical degradation of polysilane copolymer has been studied in spin cast thin films and solutions using light source of 325 nm wavelength. The room temperature photoluminescence (PL) spectrum of these films show a sharp emission at 368 nm when excited with a source of 325 nm. However, the PL intensity deteriorates with time upon light exposure. Further the causes of this degradation have been examined by characterizing the material for its transmission behaviour and changes occurring in molecular weight as analysed by GPC data.

Study of Photoluminescence Properties of CuxO Thin Films Prepared by Reactive Radio Frequency Magnetron Sputtering

2015 ◽  
Vol 1792 ◽  
Author(s):  
Jiantuo Gan ◽  
Augustinas Galeckas ◽  
Vishnukanthan Venkatachalapathy ◽  
Heine N. Riise ◽  
Bengt G. Svensson ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Radio Frequency ◽  
Room Temperature ◽  
Quartz Substrate ◽  
Rf Magnetron Sputtering ◽  
Considerable Improvement ◽  
Photoluminescence Properties ◽  
Radio Frequency Magnetron Sputtering ◽  
Room Temperature Photoluminescence

ABSTRACTCuxO thin films have been deposited on a quartz substrate by reactive radio frequency (rf) magnetron sputtering at different target powers Pt (140-190 W) while keeping other growth process parameters fixed. Room-temperature photoluminescence (PL) measurements indicate considerable improvement of crystallinity for the films deposited at Pt>170 W, with most pronounced excitonic features being observed in the film grown using Pt=190 W. These results corroborate well with the surface morphology of the films, which was found more flat, smooth and homogeneous for Pt >170 W films in comparison with those deposited at lower powers.

Role of internal stress on room-temperature permittivity of BaTiO3 ceramics and thin films

2004 ◽  
Vol 95 (1) ◽  
pp. 219-225 ◽  
Author(s):  
Jung-Kun Lee ◽  
Young Hyun Lee ◽  
Kug Sun Hong ◽  
Jin-Wook Jang
Keyword(s):  
Thin Films ◽  
Internal Stress ◽  
Room Temperature

Magnetite thin films grown on different flexible polymer substrates at room temperature: Role of antiphase boundaries in electrical and magnetic properties

2020 ◽  
Vol 846 ◽  
pp. 156368
Author(s):  
Mohammad Shahnawaze Ansari ◽  
Mohd Hafiz Dzarfan Othman ◽  
Mohammad Omaish Ansari ◽  
Sana Ansari ◽  
Huda Abdullah ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Antiphase Boundaries ◽  
Polymer Substrates ◽  
Electrical And Magnetic Properties ◽  
Flexible Polymer

In2O3 Thin Films Prepared on TiAlN Substrates Using a Triethylindium and Oxygen Mixture

2007 ◽  
Vol 124-126 ◽  
pp. 1597-1600
Author(s):  
Hyoun Woo Kim ◽  
Sun Keun Hwang ◽  
Won Seung Cho ◽  
Tae Gyung Ko ◽  
Seung Yong Choi ◽  
...  
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Room Temperature ◽  
Light Emission ◽  
Xrd Analysis ◽  
Oxygen Mixture ◽  
Photoluminescence Spectra ◽  
Sem Images ◽  
Room Temperature Photoluminescence ◽  
Visible Light Emission

This paper reports the fabrication of indium oxide (In2O3) films using a triethylindium and oxygen mixture. The deposition has been carried out on TiAlN substrates (200-350°C). We have established the correlation between the substrate temperature and the structural properties. The films deposited at 300-350°C were polycrystalline, whereas those deposited at 200°C was close to amorphous. XRD analysis and SEM images indicated that the films grown at 350°C had grained structures with the (222) preferred orientation. The room-temperature photoluminescence spectra of the In2O3 films exhibited a visible light emission.

Preparation and Characterization of (Ba1-xSrx)TiO3 Thin Films for Infrared Detection by Pulsed Iaserdeposion Method

1998 ◽  
Vol 526 ◽  
Author(s):  
R. Kubo ◽  
H. Xu ◽  
Y. Yoshino ◽  
M. Okuyama
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Infrared Detection ◽  
Sharp Change ◽  
Dielectric Peak ◽  
Peak Point ◽  
Active Oxygen Radicals ◽  
Pyroelectric Material

AbstractBa1-xSrxTiO3 thin films have been deposited on Pt/Ti/SiO2/Si substra by the pulsed ArF laser deposition method. Deposition conditions, such as ambient gas and substrt temperatze, have been optmized to rrxove crystallinepropesty. Fe oelectric p e phasehasbeenobtainod ithe BSTthin filns deposited above 500°C in Q2 gas havingpressure ofabout 13Pa. Using N2O gas instead of O2 gas improved the crystallinity, because highly chemical active oxygen radicals produced due to ultraviolet inadiation of the laser. Doping of Bi ranging around 2% fills of the role of decrease leakage current of BST thin films. Temperature dependence of the dielectric constant (εr) shows a sharp change, peaking aroumd room temperature. The peak point exists below 25°C in the ratio of Ba/Sr=1.1 film, and shills above 50°C in Ba/Sr=5.7 film. When the Ba/Sr ratio is 1.4 the dielectric peak exists near 27°C and is very sharp. The maxinium differentW rate of dielectric constanttversus temperature is the largest in Ba/Sr=1.4 film and is about 100K-1. This value is equivalent to apyroelectric coefficient of 1.8 × 10-7 C/cm2K, which is almost the same as that of LiTaO3 single crystl, a typical pyroelectric material.

Role of multivalent Cu, oxygen vacancies and CuO nanophase in the ferromagnetic properties of ZnO:Cu thin films

RSC Advances ◽  
2015 ◽  
Vol 5 (69) ◽  
pp. 55648-55657 ◽  
Author(s):  
M. Younas ◽  
Junying Shen ◽  
Mingquan He ◽  
R. Lortz ◽  
Fahad Azad ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Room Temperature ◽  
Oxygen Vacancies ◽  
Room Temperature Ferromagnetism ◽  
Simultaneous Presence ◽  
Ferromagnetic Properties

Room temperature ferromagnetism (FM) of these thin film samples are highly tuneable by the simultaneous presence of CuO nanophases and multivalent Cu and Vö concentrations.

Sign in / Sign up

Export Citation Format

Share Document