Continuous separation of copper ions from a mixture of heavy metal ions using a three-zone carousel process packed with metal ion-imprinted polymer

2010 ◽  
Vol 1217 (45) ◽  
pp. 7100-7108 ◽  
Author(s):  
Se-Hee Jo ◽  
See-Young Lee ◽  
Kyeong-Mok Park ◽  
Sung Chul Yi ◽  
Dukjoon Kim ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Copper Ions ◽  
Ion Imprinted Polymer ◽  
Imprinted Polymer ◽  
Continuous Separation ◽  
Ion Imprinted

scholarly journals Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 286 ◽  
Author(s):  
Radhia Msaadi ◽  
Gorkem Yilmaz ◽  
Andrit Allushi ◽  
Sena Hamadi ◽  
Salah Ammar ◽  
...  
Keyword(s):  
Visible Light ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Polymer Nanocomposites ◽  
Metal Ion ◽  
Copper Ions ◽  
Maximum Adsorption Capacity ◽  
Imprinted Polymer ◽  
Ion Imprinted ◽  
Ion Imprinting

There is an urgent demand worldwide for the development of highly selective adsorbents and sensors of heavy metal ions and other organic pollutants. Within these environmental and public health frameworks, we are combining the salient features of clays and chelatant polymers to design selective metal ion adsorbents. Towards this end, the ion imprinting approach has been used to develop a novel nanohybrid material for the selective separation of Cu2+ ions in an aqueous solution. The Cu2+-imprinted polymer/montmorillonite (IIP/Mt) and non-imprinted polymer/montmorillonite (NIP/Mt) nanocomposites were prepared by a radical photopolymerization process in visible light. The ion imprinting step was indeed important as the recognition of copper ions by IIP/Mt was significantly superior to that of NIP/Mt, i.e., the reference nanocomposite synthesized in the same way but in the absence of Cu2+ ions. The adsorption process as batch study was investigated under the experimental condition affecting same parameters such as contact time, concentration of metal ions, and pH. The adsorption capacity of Cu2+ ions is maximized at pH 5. Removal of Cu2+ ion achieved equilibrium within 15 min; the results obtained were found to be fitted by the pseudo-second-order kinetics model. The equilibrium process was well described by the Langmuir isothermal model and the maximum adsorption capacity was found to be 23.6 mg/g. This is the first report on the design of imprinted polymer nanocomposites using Type II radical initiators under visible light in the presence of clay intercalated with hydrogen donor diazonium. The method is original, simple and efficient; it opens up new horizons in the general domain of clay/polymer nanocomposites.

scholarly journals Ag-Functionalized Si Nanowire Arrays Aligned Vertically for SERS Detection of Captured Heavy Metal Ions by BSA

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 685
Author(s):  
Ai-Huei Chiou ◽  
Jun-Luo Wei ◽  
Ssu-Han Chen
Keyword(s):  
Heavy Metal ◽  
Raman Scattering ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Great Promise ◽  
Ag Nps ◽  
Water Contact ◽  
Oh Groups ◽  
Si Nanowire

A novel surface-enhanced Raman scattering (SERS)-based probe to capture heavy metal ion (Zn2+) by bovine serum albumin (BSA) using Si-nanowire (SiNW) arrays with silver nanoparticles (AgNPs) was developed. A layer with AgNPs was deposited on the SiNW surface by RF magnetron sputtering for enhancement of SERS signals. Using a high-resolution transmission electron microscope (HRTEM), the observation reveals that the AgNP layer with depths of 30–75 nm was successfully deposited on SiNW arrays. The Ag peaks in EDS and XRD spectra of SiNW arrays confirmed the presence of Ag particles on SiNW arrays. The WCA observations showed a high affinity of the Ag–SiNW arrays immobilized with BSA (water contact angle (WCA) = 87.1°) and ZnSO4 (WCA = 8.8°). The results of FTIR analysis illustrate that the conjugate bonds exist between zinc sulfate (ZnSO4) and –OH groups/–NH groups of BSA. The resulting SiNWs/Ag NPs composite interfaces showed large Raman scattering enhancement for the capture of heavy metal ions by BSA with a detection of 0.1 μM. BSA and ZnSO4 conjugations, illustrating specific SERS spectra with high sensitivity, which suggests great promise in developing label-free biosensors.

scholarly journals Nanocelllulose Based Adsorbents for Heavy Metal Ions Removal

2021 ◽  
Author(s):  
Rongrong Si ◽  
Daiqi Wang ◽  
Yehong Chen ◽  
Dongmei Yu ◽  
Qijun Ding ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
High Performance ◽  
Advanced Technologies ◽  
Good Biocompatibility ◽  
Heavy Metal Ions Removal ◽  
Metal Ions Removal

Abstract Heavy metal ion pollutions are of serious threat for our human health, and advanced technologies on removal of heavy metal ions in water or soil are in the focus of intensive research worldwide. Nanocellulose based adsorbents are emerging as an environmentally friendly appealing materials platform for heavy metal ions removal as nanocellulose has higher specific surface area, excellent mechanical properties and good biocompatibility. In this review, we briefly compare the differences of three kinds of nanocellulose and their preparation method. Then we cover the most recent work on nanocellulose based adsorbents for heavy metal ions removal, and present an in-depth discussion of the modification technologies for nanocellulose in assembling high performance heavy ions adsorbent process. By introducing functional groups, such as amino, carboxyl, phenolic hydroxyl, and thiol, the nanocellulose based adsorbents not only remove single heavy metal ions through ion exchange, chelation/complexation/coordination, electrostatic attraction, hydrophobic actions, binding affinity and redox reactions, but also can selectively adsorb multiple heavy ions in water. Finally, some challenges of nanocellulose based adsorbents for heavy metal ions are also prospected. We anticipate that the review supplies some guides for nanocellulose based adsorbents applied in heavy metal ions removal field.

Functional group effect of isoreticular metal–organic frameworks on heavy metal ion adsorption

2018 ◽  
Vol 42 (11) ◽  
pp. 8864-8873 ◽  
Author(s):  
Leili Esrafili ◽  
Vahid Safarifard ◽  
Elham Tahmasebi ◽  
M. D. Esrafili ◽  
Ali Morsali
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Functional Group ◽  
Metal Organic Frameworks ◽  
Ion Adsorption ◽  
Group Effect ◽  
Metal Ion Adsorption ◽  
Metal Organic

We examined adsorption behavior of some MOFs having different functional groups in their pillar structures for adsorption of some heavy metal ions.

Recent Advances in Water Treatment Using Graphene-based Materials

2020 ◽  
Vol 17 (1) ◽  
pp. 74-90 ◽  
Author(s):  
Nader Ghaffari Khaligh ◽  
Mohd Rafie Johan
Keyword(s):  
Heavy Metal ◽  
Water Treatment ◽  
Ion Exchange ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Membrane Filtration ◽  
Chemical Precipitation ◽  
High Specific Surface Area ◽  
Adsorption Parameters

: A variety of processes were reported for efficient removing of heavy metal from wastewater, including but not limited to ion exchange, reverse osmosis, membrane filtration, flotation, coagulation, chemical precipitation, solvent extraction, electrochemical treatments, evaporation, oxidation, adsorption, and biosorption. Among the aforementioned techniques, adsorption/ion exchange has been known as a most important method for removing heavy metal ions and organic pollutants due to great removal performance, simple and easy process, cost-effectiveness and the considerable choice of adsorbent materials. : Nanotechnology and its applications have been developed in most branches of science and technology. Extensive studies have been conducted to remove heavy metal ions from wastewater by preparation and applications of various nanomaterials. Nanomaterials offer advantages in comparison to other materials including an extremely high specific surface area, low-temperature modification, short intraparticle diffusion distance, numerous associated sorption sites, tunable surface chemistry, and pore size. In order to evaluate an adsorbent, two key parameters are: the adsorption capacity and the desorption property. The adsorption parameters including the absorbent loading, pH and temperature, concentration of heavy metal ion, ionic strength, and competition among metal ions are often studied and optimized. : Several reviews have been published on the application of Graphene (G), Graphene Oxide (GO) in water treatment. In this minireview, we attempted to summarize the recent research advances in water treatment and remediation process by graphene-based materials and provide intensive knowledge of the removal of pollutants in batch and flow systems. Finally, future applicability perspectives are offered to encourage more interesting developments in this promising field. This minireview does not include patent literature.

Triazole-amide isosteric pyridine-based supramolecular gelators in metal ion and biothiol sensing with excellent performance in adsorption of heavy metal ions and picric acid from water

2019 ◽  
Vol 43 (2) ◽  
pp. 934-945 ◽  
Author(s):  
Atanu Panja ◽  
Kumaresh Ghosh
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Marked Effect ◽  
Picric Acid ◽  
Excellent Performance ◽  
Ion Sensing ◽  
Gelling Properties ◽  
Metal Ion Sensing

Pyridine-based gelators 1–4 of triazole-amide isosteric relationship have been considered in metal ion sensing, heavy metal and picric acid adsorption from water. The change from triazole to isosteric amide has marked effect on gelling properties of the gelators.

Heavy metal ion discrimination based on distinct interaction between single-stranded DNA and methylene blue

2019 ◽  
Vol 11 (1) ◽  
pp. 17-20 ◽  
Author(s):  
Li Li ◽  
Bing Liu ◽  
Zhengbo Chen
Keyword(s):  
Heavy Metal ◽  
Methylene Blue ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Sensor Array ◽  
Colorimetric Sensor ◽  
Heavy Metal Ion ◽  
Single Stranded Dna ◽  
Colorimetric Sensor Array

In this work, we developed a facile and extensible colorimetric sensor array based on different interactions between methylene blue (MB) and single-stranded DNA (ssDNA) for the discrimination of heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document