ASR mitigation using binary and ternary blends with waste glass powder

2021 ◽  
Vol 280 ◽  
pp. 122425
Author(s):  
Ebenezer O. Fanijo ◽  
Emad Kassem ◽  
Ahmed Ibrahim
Keyword(s):  
Glass Powder ◽  
Waste Glass ◽  
Ternary Blends ◽  
Waste Glass Powder

scholarly journals Thermophysical Properties of Cement Mortar Containing Waste Glass Powder

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 488
Author(s):  
Oumaima Nasry ◽  
Abderrahim Samaouali ◽  
Sara Belarouf ◽  
Abdelkrim Moufakkir ◽  
Hanane Sghiouri El Idrissi ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Specific Heat ◽  
Thermophysical Properties ◽  
Glass Powder ◽  
Cement Mortar ◽  
Soda Lime ◽  
Waste Glass ◽  
Soda Lime Glass ◽  
Volumetric Specific Heat ◽  
Waste Glass Powder

This study aims to provide a thermophysical characterization of a new economical and green mortar. This material is characterized by partially replacing the cement with recycled soda lime glass. The cement was partially substituted (10, 20, 30, 40, 50 and 60% in weight) by glass powder with a water/cement ratio of 0.4. The glass powder and four of the seven samples were analyzed using a scanning electron microscope (SEM). The thermophysical properties, such as thermal conductivity and volumetric specific heat, were experimentally measured in both dry and wet (water saturated) states. These properties were determined as a function of the glass powder percentage by using a CT-Meter at different temperatures (20 °C, 30 °C, 40 °C and 50 °C) in a temperature-controlled box. The results show that the thermophysical parameters decreased linearly when 60% glass powder was added to cement mortar: 37% for thermal conductivity, 18% for volumetric specific heat and 22% for thermal diffusivity. The density of the mortar also decreased by about 11% in dry state and 5% in wet state. The use of waste glass powder as a cement replacement affects the thermophysical properties of cement mortar due to its porosity as compared with the control mortar. The results indicate that thermal conductivity and volumetric specific heat increases with temperature increase and/or the substitution rate decrease. Therefore, the addition of waste glass powder can significantly affect the thermophysical properties of ordinary cement mortar.

scholarly journals Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

2021 ◽  
Vol 13 (7) ◽  
pp. 3979
Author(s):  
Rosa María Tremiño ◽  
Teresa Real-Herraiz ◽  
Viviana Letelier ◽  
Fernando G. Branco ◽  
José Marcos Ortega
Keyword(s):  
Diffusion Coefficient ◽  
Water Absorption ◽  
Glass Powder ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Waste Glass ◽  
Supplementary Cementitious Materials ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Waste Glass Powder

One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion.

Utilization of waste glass powder in the production of cement and concrete

2016 ◽  
Vol 124 ◽  
pp. 866-877 ◽  
Author(s):  
Ali A. Aliabdo ◽  
Abd Elmoaty M. Abd Elmoaty ◽  
Ahmed Y. Aboshama
Keyword(s):  
Glass Powder ◽  
Waste Glass ◽  
Waste Glass Powder ◽  
Cement And Concrete

Mix design of the green self-consolidating concrete: Incorporating the waste glass powder

2019 ◽  
Vol 199 ◽  
pp. 369-384 ◽  
Author(s):  
Ali Hendi ◽  
Davood Mostofinejad ◽  
Arash Sedaghatdoost ◽  
Mehdi Zohrabi ◽  
Navid Naeimi ◽  
...  
Keyword(s):  
Glass Powder ◽  
Waste Glass ◽  
Mix Design ◽  
Self Consolidating Concrete ◽  
Waste Glass Powder

scholarly journals The Improvement of Engineering Properties of Expansive Soil using Waste Glass Powder (WGP) and Quick Lime

2021 ◽  
Vol 9 (VI) ◽  
pp. 3598-3604
Author(s):  
Bhagwan Singh Lodha
Keyword(s):  
Glass Powder ◽  
Clayey Soil ◽  
Expansive Soil ◽  
Waste Glass ◽  
Engineering Properties ◽  
Binding Property ◽  
Unconfined Compression Test ◽  
Quick Lime ◽  
Waste Glass Powder ◽  
Consolidation Settlement

This study was carried out with an intention to observe any sign of improvement of expansive clayey soil due to the addition of Waste Glass Powder (WGP) with it. In this laboratory work clayey (BC) type soil has been chosen. The reason behind choosing clay is that it has many problems. The main problem is that it undergoes consolidation settlement due to the application of long-term loading. Another problem is it shrinks significantly if it is dried and expands significantly, if it absorbs moisture than exerts much pressure on the substructure. Quick Lime and Waste Glass powder is chosen to check the improvement because waste glass powder is cohesionless material and also contains silica, lime etc. Addition of cohesionless material to the cohesive soil means it will lesser the consolidation settlement and expansive nature of soil and Lime provides binding property. To investigate the traditional methods of analysing, the effect of additives on soil has been adopted i.e., conducting several tests of untreated soil and soil treated with waste glass and lime with varying percentage and then comparing the results obtained. The tests that were carried out in this study are Compaction test (Proctor test), Consolidation test (unconfined compression test). MDD and Unconfined compressive strength increases with the addition of glass powder and lime with oven dried expansive soil.

Sign in / Sign up

Export Citation Format

Share Document