scholarly journals Tissue Morphogenesis: A Cellular View of Adhesion-Dependent Cell Sorting

2020 ◽  
Vol 30 (19) ◽  
pp. R1071-R1073
Author(s):  
Daniel J. Dickinson
Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 412
Author(s):  
Kaan Erdem ◽  
Vahid Ebrahimpour Ahmadi ◽  
Ali Kosar ◽  
Lütfullah Kuddusi

Label-free, size-dependent cell-sorting applications based on inertial focusing phenomena have attracted much interest during the last decade. The separation capability heavily depends on the precision of microparticle focusing. In this study, five-loop spiral microchannels with a height of 90 µm and a width of 500 µm are introduced. Unlike their original spiral counterparts, these channels have elliptic configurations of varying initial aspect ratios, namely major axis to minor axis ratios of 3:2, 11:9, 9:11, and 2:3. Accordingly, the curvature of these configurations increases in a curvilinear manner through the channel. The effects of the alternating curvature and channel Reynolds number on the focusing of fluorescent microparticles with sizes of 10 and 20 µm in the prepared suspensions were investigated. At volumetric flow rates between 0.5 and 3.5 mL/min (allowing separation), each channel was tested to collect samples at the designated outlets. Then, these samples were analyzed by counting the particles. These curved channels were capable of separating 20 and 10 µm particles with total yields up to approximately 95% and 90%, respectively. The results exhibited that the level of enrichment and the focusing behavior of the proposed configurations are promising compared to the existing microfluidic channel configurations.


2003 ◽  
Vol 69 (6) ◽  
pp. 3569-3572 ◽  
Author(s):  
Tomohiko Nishino ◽  
Binaya B. Nayak ◽  
Kazuhiro Kogure

ABSTRACT A pure bacterial culture is composed of clonal cells in different physiological states. Separation of those subpopulations is critical for further characterization and for understanding various processes in the cultured cells. We used density-dependent cell sorting with Percoll to separate subpopulations from cultures of a marine bacterium, Vibrio parahaemolyticus. Cells from cultures in the exponential and stationary phases were fractionated according to their buoyant density, and their culturability and ability to maintain culturability under low-temperature and low-nutrient stress (stress resistance) were determined. The buoyant density of the major portion of the cells decreased with culture age. The culturability of stationary-phase cells increased with increasing buoyant density, but that of exponential-phase cells did not. Stress resistance decreased with increasing buoyant density regardless of the growth phase. The results indicate that density-dependent cell sorting is useful for separating subpopulations of different culturabilities and stress resistances. We expect that this method will be a powerful tool for analyzing cells in various physiological states, such as the viable but nonculturable state.


2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Jing-Tao Ma ◽  
Yuan-Qing Xu ◽  
Xiao-Ying Tang

As a typical microfluidic cell sorting technique, the size-dependent cell sorting has attracted much interest in recent years. In this paper, a size-dependent cell sorting scheme is presented based on a controllable asymmetric pinched flow by employing an immersed boundary-lattice Boltzmann method (IB-LBM). The geometry of channels consists of 2 upstream branches, 1 transitional channel, and 4 downstream branches (D-branches). Simulations are conducted by varying inlet flow ratio, the cell size, and the ratio of flux of outlet 4 to the total flux. It is found that, after being randomly released in one upstream branch, the cells are aligned in a line close to one sidewall of the transitional channel due to the hydrodynamic forces of the asymmetric pinched flow. Cells with different sizes can be fed into different downstream D-branches just by regulating the flux of one D-branch. A principle governing D-branch choice of a cell is obtained, with which a series of numerical cases are performed to sort the cell mixture involving two, three, or four classes of diameters. Results show that, for each case, an adaptive regulating flux can be determined to sort the cell mixture effectively.


2015 ◽  
Vol 5 (2) ◽  
pp. 20140095 ◽  
Author(s):  
Satoru Okuda ◽  
Yasuhiro Inoue ◽  
Tadashi Watanabe ◽  
Taiji Adachi

During morphogenesis, three-dimensional (3D) multicellular structures emerge from biochemical and mechanical interplays among cells. In particular, by organizing their gradient within tissues, the diffusible signalling molecules play an essential role in producing the spatio-temporal patterns of cell status such as the differentiation states. Notably, this biochemical patterning can be dynamically coupled with multicellular deformations by signal-dependent cell activities such as contraction, adhesion, migration, proliferation and apoptosis. However, the mechanism by which these cellular activities mediate the interactions between multicellular deformations and patterning is still unknown. Herein, we propose a novel framework of a 3D vertex model to express molecular signalling among the mechanically deforming cells. By specifying a density of signalling molecules for each cell, we express their transport between neighbouring cells. By simulating signal-dependent epithelial growth, we found various types of tissue morphogenesis such as arrest, expansion, invagination and evagination. In the expansion phase, growth molecules were widely diffused with increasing tissue volume, which diluted the growth molecules in order to support the autonomous suppression of tissue growth. These results indicate that the proposed model successfully expresses 3D multicellular deformations dynamically coupled with biochemical patterning. We expect our proposed model to be a useful tool for predicting new phenomena emerging from mechanochemical coupling in multicellular morphogenesis.


2006 ◽  
Vol 73 (4) ◽  
pp. 1049-1053 ◽  
Author(s):  
Katsuyuki Inoue ◽  
Masahiko Nishimura ◽  
Binaya B. Nayak ◽  
Kazuhiro Kogure

ABSTRACT The purpose of this study was to test whether some phylogenetic groups of natural marine bacteria have unique buoyant densities that allow them to be separated by the density-dependent cell sorting (DDCS) method. We first concentrated a natural bacterial assemblage to collect sufficient numbers of cells. They were separated into three fractions by DDCS, and the community structure in each was clarified by fluorescence in situ hybridization. The cells of Archaea tended to appear in the high-density fraction, whereas those of Cytophaga-Flavobacterium-Bacteroides were in the low-density fraction. We also calculated the sedimentation velocities of three typical marine bacteria (low density, middle density, and high density) using their buoyant density. The sedimentation velocities were approximately 10, 20, and 30 μm h−1; these velocities have ecological implications when the heterogeneity of bacteria is considered at a microscale. To our knowledge, this is the first report on the buoyant density of natural marine bacteria.


Sign in / Sign up

Export Citation Format

Share Document