scholarly journals Soil heterogeneity and earthworms independently promote growth of two bamboo species

2021 ◽  
Vol 130 ◽  
pp. 108068
Author(s):  
Chao Si ◽  
Wei Xue ◽  
Zi-Wu Guo ◽  
Jian-Feng Zhang ◽  
Meng-Meng Hong ◽  
...  
Planta Medica ◽  
2012 ◽  
Vol 78 (11) ◽  
Author(s):  
MT Grombone-Guaratini ◽  
LM Brandão Torres ◽  
DA Faria ◽  
CM José

2021 ◽  
Vol 13 (15) ◽  
pp. 8164
Author(s):  
Brian E. Bautista ◽  
Lessandro E. O. Garciano ◽  
Luis F. Lopez

There are limited published studies related to the mechanical properties of bamboo species in the Philippines. In this study, the shear strength properties of some economically viable bamboo species in the Philippines were properly characterized based on 220 shear test results. The rationales of selecting this mechanical property are the following: (1) Shear strength, parallel to the fiber, has the highest variability among the mechanical properties; and (2) Shear is one of the governing forces on joint connections, and such connections are the points of failure on bamboo structures when subjected to extreme loading conditions. ISO 22157-1 (2017) test protocol for shear was used for all tests. The results showed that Bambusa blumeana has the highest average shear strength, followed by Gigantochloa apus, Dendrocalamus asper, Bambusa philippinensis, and Bambusa vulgaris. However, comparative analysis, using One-way ANOVA, showed that shear strength values among these bamboo species have significant differences statistically. A linear regression model is also established to estimate the shear strength of bamboo from the physical properties. Characteristic shear strength is also determined using ISO 12122-1 (2014) for future design reference.


Agronomy ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 85
Author(s):  
Jorge Lopez-Jimenez ◽  
Nicanor Quijano ◽  
Alain Vande Wouwer

Climate change and the efficient use of freshwater for irrigation pose a challenge for sustainable agriculture. Traditionally, the prediction of agricultural production is carried out through crop-growth models and historical records of the climatic variables. However, one of the main flaws of these models is that they do not consider the variability of the soil throughout the cultivation area. In addition, with the availability of new information sources (i.e., aerial or satellite images) and low-cost meteorological stations, it is convenient that the models incorporate prediction capabilities to enhance the representation of production scenarios. In this work, an agent-based model (ABM) that considers the soil heterogeneity and water exchanges is proposed. Soil heterogeneity is associated to the combination of individual behaviours of uniform portions of land (agents), while water fluxes are related to the topography. Each agent is characterized by an individual dynamic model, which describes the local crop growth. Moreover, this model considers positive and negative effects of water level, i.e., drought and waterlogging, on the biomass production. The development of the global ABM is oriented to the future use of control strategies and optimal irrigation policies. The model is built bottom-up starting with the definition of agents, and the Python environment Mesa is chosen for the implementation. The validation is carried out using three topographic scenarios in Colombia. Results of potential production cases are discussed, and some practical recommendations on the implementation are presented.


Oikos ◽  
2021 ◽  
Author(s):  
Yongjie Liu ◽  
Michiel F. Bortier ◽  
Ivan Nijs ◽  
Yongshuo Fu ◽  
Zhenqing Li ◽  
...  

2021 ◽  
Author(s):  
Jason Smith ◽  
Richard A Hallett ◽  
Maha Deeb ◽  
Peter M Groffman

2021 ◽  
Vol 193 (8) ◽  
Author(s):  
Rajesh Kaushal ◽  
Ambrish Kumar ◽  
N. M. Alam ◽  
I. Singh ◽  
D. Mandal ◽  
...  

2021 ◽  
Vol 39 (1) ◽  
Author(s):  
Tran Thai Vinh ◽  
Hoang Nghia Nguyen ◽  
Nong Van Duy ◽  
Van Tien Tran

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2126
Author(s):  
Asier Elejoste ◽  
Alfonso Arevalillo ◽  
Nagore Gabilondo ◽  
Amaia Butron ◽  
Cristina Peña-Rodriguez

Bamboo constitutes a family of plants that are very promising and interesting as renewable materials for both large and small structure construction. To be used as an alternative to traditional materials; the understanding of its morphology and mechanical behavior is of crucial importance. As the distribution of fibers and vascular bundles differs for each type of bamboo; several bamboo types have been characterized: Phyllostachys aurea (PA), Arundinaria amabilis (AA) and Dendrocalamus strictus (DS). Morphological analysis has been performed by optical (OM) and scanning electron microscopy (SEM). Differences in density; surface morphology and wall thickness have been found. In fact; PA and AA have shown a great morphological regularity; while DS presents the greatest thickness; to the point that it can be considered full culm. The plant’s own ducts constitute a very important factor for future impregnations and the optimization of mechanical properties for structure construction.


Sign in / Sign up

Export Citation Format

Share Document