Optimization of thermal performance in a Chinese traditional heating system – Burning cave

2014 ◽  
Vol 68 ◽  
pp. 423-431 ◽  
Author(s):  
Xueyan Zhang ◽  
Bin Chen ◽  
Joe R. Zhao ◽  
Xiang Li ◽  
Sen Liu ◽  
...  
Keyword(s):  
Thermal Performance ◽  
Heating System

scholarly journals Experimental Evaluation of Nano-Enhanced Phase Change Materials in a Finned Storage Unit

2020 ◽  
Vol 10 (3) ◽  
pp. 5814-5818
Author(s):  
M. A. Aichouni ◽  
N. F. Alshammari ◽  
N. Ben Khedher ◽  
M. Aichouni
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Performance ◽  
Phase Change Materials ◽  
Performance Enhancement ◽  
Renewable Energy Sources ◽  
Heating System ◽  
Al2o3 Nanoparticles ◽  
Storage Unit ◽  
Experimental Apparatus

The intermittent nature of renewable energy sources such as solar and wind necessitates integration with energy-storage units to enable realistic applications. In this study, thermal performance enhancement of the finned Cylindrical Thermal Energy Storage (C-TES) with nano-enhanced Phase Change Material (PCM) integrated with the water heating system under Storage, Charging and Discharging (SCD) conditions were investigated experimentally. The effects of the addition of copper oxide (CuO) and aluminum oxide (Al2O3) nanoparticles in PCM on thermal conductivity, specific heat, and on charging and discharging performance rates were theoretically and experimentally investigated and studied in detail. The experimental apparatus utilized paraffin wax as PCM, which was filled in Finned C-TES to conduct the experiments. The experimental results showed a positive improvement compared with the non-nano additive PCM. The significance and originality of this project lies within the evaluation and identification of preferable metal-oxides with higher potential for improving thermal performance.

scholarly journals Development of a hybrid solar cascade heat pump heating system

2021 ◽  
Author(s):  
Jamie Fine
Keyword(s):  
Case Studies ◽  
Co2 Emissions ◽  
Heat Pump ◽  
Thermal Performance ◽  
Heating System ◽  
Solar Heating ◽  
Hot Water ◽  
Solar Irradiation ◽  
Solar Still ◽  
Evacuated Tube

Society’s use of fossil fuels has led to increasingly high levels of CO2 in the atmosphere. These levels have been linked to global average temperature rises, and increases in the severity and frequency of major weather events. To combat these effects, nations around the world have committed to reducing their CO2 emissions, and transition to renewable energy. This thesis focuses on the development of a novel solar heating system, which combines a hybrid solar panel and cascade heat pump. The thesis begins by presenting a high-level literature review of solar and heat pump technologies, followed by the initial design development of the system. Two design iterations are presented, illustrating that the final design was selected because it exhibits improved peak heat output, and reduced sensitivity to panel temperature. Next, a manuscript-based chapter is presented that focuses on utilizing the proposed solar heating system for water distillation. Case studies are presented that compare the performance of the proposed system with a solar still at four different locations. The final conclusion from these studies is that using the proposed system offers area-based performance improvements of 780% compared to a basic solar still. A second manuscript-based study is then presented, which focuses on utilizing the proposed solar heating system for domestic hot water production. Additional case studies are detailed that compare the proposed system to an evacuated tube design, and a single heat pump. The conclusions from these studies are that the proposed system exceeds the performance of the evacuated tube system by up to 64%, and that the proposed system is most beneficial during seasons with higher average dry-bulb temperatures, and increased solar irradiation. A final manuscript-based study is then presented, which focuses on a methodology for improving alternate mode thermal performance estimates for hybrid solar panels. The conclusion from this study is that the proposed methodology can successfully estimate thermal performance within 5% of actual values. Each of these studies contributes to the project goal of developing a novel solar energy heating system, which can be further developed to reduce global CO2 emissions, and reduce the effects of climate change.

scholarly journals Development of a hybrid solar cascade heat pump heating system

2021 ◽  
Author(s):  
Jamie Fine
Keyword(s):  
Case Studies ◽  
Co2 Emissions ◽  
Heat Pump ◽  
Thermal Performance ◽  
Heating System ◽  
Solar Heating ◽  
Hot Water ◽  
Solar Irradiation ◽  
Solar Still ◽  
Evacuated Tube

Society’s use of fossil fuels has led to increasingly high levels of CO2 in the atmosphere. These levels have been linked to global average temperature rises, and increases in the severity and frequency of major weather events. To combat these effects, nations around the world have committed to reducing their CO2 emissions, and transition to renewable energy. This thesis focuses on the development of a novel solar heating system, which combines a hybrid solar panel and cascade heat pump. The thesis begins by presenting a high-level literature review of solar and heat pump technologies, followed by the initial design development of the system. Two design iterations are presented, illustrating that the final design was selected because it exhibits improved peak heat output, and reduced sensitivity to panel temperature. Next, a manuscript-based chapter is presented that focuses on utilizing the proposed solar heating system for water distillation. Case studies are presented that compare the performance of the proposed system with a solar still at four different locations. The final conclusion from these studies is that using the proposed system offers area-based performance improvements of 780% compared to a basic solar still. A second manuscript-based study is then presented, which focuses on utilizing the proposed solar heating system for domestic hot water production. Additional case studies are detailed that compare the proposed system to an evacuated tube design, and a single heat pump. The conclusions from these studies are that the proposed system exceeds the performance of the evacuated tube system by up to 64%, and that the proposed system is most beneficial during seasons with higher average dry-bulb temperatures, and increased solar irradiation. A final manuscript-based study is then presented, which focuses on a methodology for improving alternate mode thermal performance estimates for hybrid solar panels. The conclusion from this study is that the proposed methodology can successfully estimate thermal performance within 5% of actual values. Each of these studies contributes to the project goal of developing a novel solar energy heating system, which can be further developed to reduce global CO2 emissions, and reduce the effects of climate change.

Effect of Plant in Two Atrium Building Comfort: Report on Two Field-Monitored Case Studies

2011 ◽  
Vol 110-116 ◽  
pp. 1958-1962
Author(s):  
Marziyeh Kazemzadeh ◽  
Mansureh Tahbaz
Keyword(s):  
Relative Humidity ◽  
Case Studies ◽  
Thermal Performance ◽  
Weather Conditions ◽  
Heating System ◽  
Measuring Period ◽  
Total Temperature

This paper present the field-measured thermal performance of two atrium building in a clinic center located in Kerman, where winter is cold and dry. The case studies are an enclosed atrium space. The atriums have open corridors at each storey connecting them to adjacent space. The site measurement and monitoring work were carried out for one day covering clear day in November 2010. The weather conditions during the day measuring period were stable and heating system was off. This study will investigated about different temperature of atrium levels with plant and without plant. This study has shown that in cold and clear winter day, when average of external relative humidity in this day was around 9%,in the atrium relative humidity changed between 10%- 22% and total temperature in atrium level were changed between 18'C-28'C. whilst in the atrium without plant this range were between 3%-23% and 15'C-35'C respectively.

Development of Analysis Algorithm and Computational Methodology for the Evaluation of Non-Uniform Energy Conversion System Performance: Part I — Component Analysis Modules

2006 ◽  
Author(s):  
Casey Loughrin ◽  
Hyunjae Park ◽  
Robert Weber
Keyword(s):  
Energy Conversion ◽  
Thermal Performance ◽  
System Performance ◽  
Flow Characteristics ◽  
Heating System ◽  
Component Analysis ◽  
Connectivity Matrix ◽  
Two Phase ◽  
Energy Conversion Systems ◽  
The Individual

This paper examines the development of the individual component analysis modules applied to two selected energy conversion systems; a vapor-compression refrigeration system and a boiler heating system. The energy conversion components used in this work are the evaporator, condenser, expansion valve, mixing chamber, open feedwater heater, pipe, boiler, pump, and compressor. The developed component analysis modules are able to apply input data and specifications to estimate the corresponding thermal performance of the component. Upon investigation of the two case studies presented, it was found that the two-phase heat exchanging components such as the evaporator, condenser and boiler were the primary sources of the non-uniform system performance characteristics. As a consequence, a system connectivity matrix has been developed to evaluate the mass and energy flow characteristics of working fluids between components. The developed component analysis modules, in conjunction with the system connectivity matrix, were exclusively used to calculate the local and overall system thermal performance.

Sign in / Sign up

Export Citation Format

Share Document