Influence of drying conditions on the effective moisture diffusivity, energy of activation and energy consumption during the thin-layer drying of berberis fruit (Berberidaceae)

2008 ◽  
Vol 49 (10) ◽  
pp. 2865-2871 ◽  
Author(s):  
Mortaza Aghbashlo ◽  
Mohammad H. kianmehr ◽  
Hadi Samimi-Akhijahani
Keyword(s):  
Energy Consumption ◽  
Thin Layer ◽  
Moisture Diffusivity ◽  
Energy Of Activation ◽  
Effective Moisture Diffusivity ◽  
Effective Moisture ◽  
Thin Layer Drying ◽  
Drying Conditions

scholarly journals Mathematical modelling of thin layer drying of pear

2016 ◽  
Vol 22 (2) ◽  
pp. 191-199 ◽  
Author(s):  
Monika Lutovska ◽  
Vangelce Mitrevski ◽  
Ivan Pavkov ◽  
Vladimir Mijakovski ◽  
Milivoj Radojcin
Keyword(s):  
Experimental Data ◽  
Thin Layer ◽  
Moisture Diffusivity ◽  
Effective Moisture Diffusivity ◽  
Data Set ◽  
Effective Moisture ◽  
Air Temperatures ◽  
Thin Layer Drying ◽  
Drying Kinetic ◽  
Drying Conditions

In this study, a thin - layer drying of pear slices as a function of drying conditions were examined. The experimental data set of thin - layer drying kinetics at five drying air temperatures 30, 40, 50, 60 and 70?C, and three drying air velocities 1, 1.5 and 2 m s-1 were obtained on the experimental setup, designed to imitate industrial convective dryer. Five well known thin - layer drying models from scientific literature were used to approximate the experimental data in terms of moisture ratio. In order to find which model gives the best results, numerical experiments were made. For each model and data set, the statistical performance index, (?), and chi-squared, (?2), value were calculated and models were ranked afterwards. The performed statistical analysis shows that the model of Midilli gives the best statistical results. Because the effect of drying air temperature and drying air velocity on the empirical parameters was not included in the base Midilli model, in this study the generalized form of this model was developed. With this model, the drying kinetic data of pear slices can be approximated with high accuracy. The effective moisture diffusivity was determined by using Fick?s second laws. The obtained values of the effective moisture diffusivity, (Deff), during drying ranged between 6.49 x 10-9 and 3.29 x 10-8 m2 s-1, while the values of activation energy (E0) varied between 28.15 to 30.51 kJ mol-1.

scholarly journals Kinetics, energy efficiency and mathematical modeling of thin layer solar drying of figs (Ficus carica L.)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lahcen Hssaini ◽  
Rachida Ouaabou ◽  
Hafida Hanine ◽  
Rachid Razouk ◽  
Ali Idlimam
Keyword(s):  
Energy Efficiency ◽  
Thin Layer ◽  
Air Flow ◽  
Moisture Diffusivity ◽  
Energy Utilization ◽  
Ficus Carica ◽  
Effective Moisture Diffusivity ◽  
Drying Time ◽  
Effective Moisture ◽  
Thin Layer Drying

AbstractFirst convectional thin layer drying of two fig (Ficus carica L.) varieties growing in Moroccan, using partially indirect convective dryer, was performed. The experimental design combined three air temperatures levels (60, 70 and 80 °C) and two air-flow rates (150 and 300 m3/h). Fig drying curve was defined as a third-order polynomial equation linking the sample moisture content to the effective moisture diffusivity. The average activation energy was ranged between 4699.41 and 7502.37 kJ/kg. It raised proportionally with the air flow velocity, and the same pattern were observed for effective moisture diffusivity regarding drying time and velocity. High levels of temperature (80 °C) and velocity (300 m3/h) lead to shorten drying time (200 min) and improve the slices physical quality. Among the nine tested models, Modified Handerson and Pabis exhibited the highest correlation coefficient value with the lowest chi-square for both varieties, and then give the best prediction performance. Energetic investigation of the dryer prototype showed that the total use of energy alongside with the specific energy utilization (13.12 and 44.55 MWh/kg) were inversely proportional to the velocity and drying temperature. Likewise, the energy efficiency was greater (3.98%) higher in drying conditions.

scholarly journals Estimating the Drying Kinetics and Effective Moisture Diffusivity of Fresh Water Prawn (Macrobrachium rosenbergii)

2021 ◽  
pp. 40-48
Author(s):  
Egbe E. W. ◽  
Davies R. M.
Keyword(s):  
Thin Layer ◽  
Fresh Water ◽  
Initial Moisture Content ◽  
Macrobrachium Rosenbergii ◽  
Moisture Diffusivity ◽  
Drying Kinetics ◽  
Effective Moisture Diffusivity ◽  
Coefficient Of Determination ◽  
Effective Moisture ◽  
Thin Layer Drying

Fresh-water prawn (Macrobrachium rosenbergii) once harvested, tends to deteriorate rapidly because of the high systemic moisture it constituent which has lead to post-harvest losses, drying as a method of preservation widely used for high moisture bio-products reduces moisture probably to bone-dry level and thereby increased the shelf-life of the fresh-water prawn. Therefore, Estimating the Drying Kinetics and Effective Moisture Diffusivity of Fresh Water Prawn (Macrobrachium rosenbergii) was investigated using a laboratory convective oven dryer and was arranged in a thin layer. 50-100°C temperatures were applied, varying on multiple of 10°C. It was observed that the drying rate increased with increasing drying temperatures. Drying data obtained were fitted into four empirical thin-layer drying models, and the best model was investigated after undergoing statistical parameters (of coefficient of determination, R2; root mean square error, RMSE and reduced chi-square, χ2). The ANN and Henderson model was found to perform satisfactorily in describing the drying behaviour of the Fresh-water prawn samples at the chosen temperature levels. The initial moisture content of all the samples was 54% wb. The final effective moisture diffusivity of the samples during the drying experiments ranges from 1.26 x 10-7m2/s - 7.06 x 10-7m2/s, and the temperature related activation energy of diffusion was found to be 12.82-kJ/mol. Drying occurred mainly in the falling rate period, and the characterizing drying curves were exponential with increase in drying temperatures.

scholarly journals Influence of Drying Conditions on the Effective Moisture Diffusivity and Energy Requirements of Ginger Slices

2014 ◽  
Vol 3 (5) ◽  
pp. 103 ◽  
Author(s):  
Tinuade J. Afolabi ◽  
Toyosi Y. Tunde-Akintunde ◽  
Olusegun J. Oyelade
Keyword(s):  
Air Temperature ◽  
Energy Requirement ◽  
Ambient Air ◽  
Moisture Diffusivity ◽  
Effective Moisture Diffusivity ◽  
Slice Thickness ◽  
Drying Time ◽  
Effective Moisture ◽  
Thin Layer Drying ◽  
Drying Conditions

<p>The thin layer drying behaviour of ginger slices in a laboratory dryer was examined. The slices of 5 mm, 10 mm and 15 mm thicknesses were dried using heated ambient air at temperatures from 40 to 70 ºC and air velocity of 1.5 m/s. The effects of drying air temperature and slice thickness on the drying characteristics, drying time and energy requirement of drying process was determined. The results have shown that an increase in the drying air temperature causes shorter drying times. Thinner slices also causes a shorter drying time. The effective moisture diffusivity values increased from 3.36814 × 10<sup>-10</sup> m<sup>2</sup>/s to 5.82524 × 10<sup>-9</sup> m<sup>2</sup>/s while the activation energy values for different slice thickness of ginger varied from 196.15 to 198.79 kJ/mol. The total needed energy varied from 735.3 to 868.5 kWh while the value of specific energy requirement varied from 3676.6 to 4342.4 kWh/kg respectively.</p>

Far-Infrared Drying Characteristics of Mushroom Slices

2013 ◽  
Vol 8 (2) ◽  
pp. 107-117 ◽  
Author(s):  
Hosain Darvishi ◽  
Gholamhassan Najafi ◽  
Adel Hosainpour ◽  
Jala Khodaei ◽  
Mohsen Aazdbakht
Keyword(s):  
Moisture Content ◽  
Thin Layer ◽  
Far Infrared ◽  
Moisture Diffusivity ◽  
Maximum Energy ◽  
Effective Moisture Diffusivity ◽  
Effect Of Temperature ◽  
Infrared Drying ◽  
Effective Moisture ◽  
Thin Layer Drying

Abstract In this study, infrared drying characteristic of mushroom slices was investigated in the temperature range of 50–90°C. The drying data were fitted to five thin-layer drying models. The performance of these models was compared using the determination of coefficient (R2), reduced chi-square (χ2), and root mean square error between the observed and predicted moisture ratios. The values of the diffusivity coefficients at each temperature were obtained using Fick’s second law of diffusion. The drying processes were completed within 60–168 min at different temperatures. Experimental drying curves showed only a falling drying rate period. The results show that the logarithmic model is the most appropriate model for infrared drying behavior of thin-layer mushroom slices. A third-order polynomial relationship was found to correlate the effective moisture diffusivity with moisture content. The average effective moisture diffusivity increased with increasing temperature and decrease in moisture content of mushroom slices and varied from 8.039 × 10−10 to 20.618 × 10−10 m2/s. Arrhenius relation with an activation energy value of 21.85 kJ/mol expressed the effect of temperature on the average diffusivity. The minimum and the maximum energy requirements for drying of mushroom slices were also determined as 2.87 kW h/kg water and 5.36 kW h/kg water for 90 and 50°C, respectively.

Moisture Diffusivity and Energy Consumption during Microwave Drying of Plaster of Paris

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Magesh Ganesh Pillai ◽  
Iyyasamy Regupathi ◽  
Lima Rose Miranda ◽  
Thanapalan Murugesan
Keyword(s):  
Energy Consumption ◽  
Initial Moisture Content ◽  
Moisture Diffusivity ◽  
Operating Conditions ◽  
Microwave Drying ◽  
Effective Moisture Diffusivity ◽  
Experimental Conditions ◽  
Drying Time ◽  
Plaster Of Paris ◽  
Effective Moisture

The drying characteristics of plaster of paris (POP) under microwave conditions at different microwave power input, initial moisture content, sample thickness and drying time were studied. Further the experimental data on moisture ratio of POP for different operating conditions were obtained and calculations were made using nine basic drying model equations. The appropriate model with modified constants and coefficients to represent the drying kinetics of POP was found through the analysis of the statistical analysis. The effective moisture diffusivity of the drying process was also computed for different experimental conditions and a relationship between the drying rate constant and the effective moisture diffusivity was obtained. The energy consumption for microwave drying of plaster of paris at different experimental conditions were also computed.

Sign in / Sign up

Export Citation Format

Share Document