Fuel consumption assessment of an electrified powertrain with a multi-mode high-efficiency engine in various levels of hybridization

2018 ◽  
Vol 155 ◽  
pp. 100-115 ◽  
Author(s):  
A. Solouk ◽  
M. Shakiba-Herfeh ◽  
J. Arora ◽  
M. Shahbakhti
Keyword(s):  
Fuel Consumption ◽  
High Efficiency ◽  
Multi Mode ◽  
Efficiency Engine

A novel coaxial multi-mode hybrid transmission system for mining trucks

2018 ◽  
Vol 233 (10) ◽  
pp. 2492-2501
Author(s):  
Weiwei Yang ◽  
Jue Yang ◽  
Nong Zhang
Keyword(s):  
Fuel Consumption ◽  
Hybrid System ◽  
High Speed ◽  
High Efficiency ◽  
Planetary Gear ◽  
Transmission System ◽  
Energy Management Strategy ◽  
Parallel Transmission ◽  
Transmission Structure ◽  
Multi Mode

Given that hybrid electric vehicles could significantly reduce fuel consumption, and mining trucks are much more sensitive to energy conversion efficiency, it is essential to develop a hybrid system, which could meet both the specific requirements of the structure of mining trucks and the needs for overall efficiency improvements. In this paper, a novel multi-mode transmission system, which is composed of an engine, two motors, one planetary gear set, and a parallel transmission structure, is proposed. The planetary gear set serves as a power-split device, and the parallel transmission structure can make the engine and motor work in the high-efficiency area both in low-speed and high-speed conditions. Due to the flexibility of the proposed system, five power-flow modes can be implemented, and they are illustrated with a specially designed rule-based energy management strategy. To validate the effectiveness of the multi-mode transmission system, dynamic programming is used to assess the fuel consumption during the given driving cycle without considering drivability. The simulation results reveal that the proposed multi-mode transmission system owns better fuel efficiency for mining trucks compared with highly regarded Toyota Hybrid System and conventional automated manual transmission system.

Investigation of Hybrid Fuel Cell (HFC) Technology Applications on the Future Passenger Railroad Transportation

Joint Rail ◽  
2003 ◽  
Author(s):  
H. Moghbelli ◽  
Y. Gao ◽  
R. Langari ◽  
M. Ehsani
Keyword(s):  
Fuel Consumption ◽  
Fuel Economy ◽  
High Speed ◽  
High Efficiency ◽  
New Technologies ◽  
Positive Impact ◽  
Weak Link ◽  
Transportation System ◽  
Production Costs ◽  
Passenger Railroad

Due to the consideration of fragile security, and longer check-in times and inconveniences due to increased air travel security examination since September 11th 2001, more and more people have turn to ground transportation. Unfortunately, the inefficient, environment-unfriendly and unsafe passenger cars and buses are the only choices available for middle distance trips. Development of high efficiency, clean and high speed railroad passenger transportation system has become more necessary to overcome this weak link. In this paper, the applicability of hybrid drive train technologies for middle-distance passenger train locomotives will be investigated. A systematic design of the diesel based hybrid locomotive helps to increase efficiency, improve fuel economy, reduce emissions and also reduce mass production costs. Furthermore, professional management and maintenance of railroad train locomotives make such new technologies more practical than for road vehicles. The success of such transportation system will have a great positive impact on our social activities, quality of life, energy supply, environment and economy. A diesel based hybrid electric locomotive (HEL) with batteries or an ultracapacitor is an option to reduce fuel consumption and emissions and provide better performance and fuel economy. The reduced fuel consumption helps reduce the amount of pollutants released. Engineering estimation indicate that emissions will be reduced by 70% and fuel efficiency will be increased by at least 30% in hybrid locomotives.

scholarly journals Multi-Objective Optimization of Aircraft Taxiing on the Airport Surface with Consideration to Taxiing Conflicts and the Airport Environment

2019 ◽  
Vol 11 (23) ◽  
pp. 6728 ◽  
Author(s):  
Zhang ◽  
Huang ◽  
Liu ◽  
Li
Keyword(s):  
Fuel Consumption ◽  
High Efficiency ◽  
Optimization Method ◽  
Pollutant Emissions ◽  
Multi Objective Optimization ◽  
Optimization Scheme ◽  
Nsga Ii ◽  
Multi Objective ◽  
International Airport ◽  
And Control

High-efficiency taxiing for safe operations is needed by all types of aircraft in busy airports to reduce congestion and lessen fuel consumption and carbon emissions. This task is a challenge in the operation and control of the airport’s surface. Previous studies on the optimization of aircraft taxiing on airport surfaces have rarely integrated waiting constraints on the taxiway into the multi-objective optimization of taxiing time and fuel emissions. Such studies also rarely combine changes to the airport’s environment (such as airport elevation, field pressure, temperature, etc.) with the multi-objective optimization of aircraft surface taxiing. In this study, a multi-objective optimization method for aircraft taxiing on an airport surface based on the airport’s environment and traffic conflicts is proposed. This study aims to achieve a Pareto optimized taxiing scheme in terms of taxiing time, fuel consumption, and pollutant emissions. This research has the following contents: (1) Previous calculations of aircraft taxiing pathways on the airport’s surface have been based on unimpeded aircraft taxiing. Waiting on the taxiway is excluded from the multi-objective optimization of taxiing time and fuel emissions. In this study, the waiting points were selected, and the speed curve was optimized. A multi-objective optimization scheme under aircraft taxiing obstacles was thus established. (2) On this basis, the fuel flow of different aircraft engines was modified with consideration to the aforementioned environmental airport differences, and a multi-objective optimization scheme for aircraft taxiing under different operating environments was also established. (3) A multi-objective optimization of the taxiing time and fuel consumption of different aircraft types was realized by acquiring their parameters and fuel consumption indexes. A case study based on the Shanghai Pudong International Airport was also performed in the present study. The taxiway from the 35R runway to the 551# stand in the Shanghai Pudong International Airport was optimized by the non-dominant sorting genetic algorithm II (NSGA-II). The taxiing time, fuel consumption, and pollutant emissions at this airport were compared with those of the Kunming Changshui International Airport and Lhasa Gonggar International Airport, which have different airport environments. Our research conclusions will provide the operations and control departments of airports a reference to determine optimal taxiing schemes.

Design and Operation of a Hybrid CCHP System Including PV-Wind Devices

2013 ◽  
Author(s):  
J. L. Wang ◽  
J. Y. Wu ◽  
C. Y. Zheng
Keyword(s):  
Fuel Consumption ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Waste Heat ◽  
Internal Combustion ◽  
Energy System ◽  
Optimal Operation ◽  
Combustion Engines ◽  
Wind System ◽  
Fuel Price

CCHP systems based on internal combustion engines have been widely accepted as efficient distributed energy resources systems. CCHP systems can be efficient mainly because that the waste heat of engines can be recovered and used. If the waste heat is not used, CCHP systems may not be beneficial choices. PV-wind systems can generate electricity without fuel consumption, but the electric output depends on the weather, which is not reliable. A PV-wind system can be integrated into a CCHP system to form a higher efficient energy system. Actually, a hybrid energy system based on PV-wind devices and internal combustion engines has been studied by many researchers. But the waste heat of the engine is seldom considered in the previous work. Researches show that, 20∼30% energy can be converted into electricity by a small size engine while more than 70% is released. If the waste heat is not recovered, the system cannot reach a high efficiency. This work aims to analyze a hybrid CCHP system with PV-wind devices. Internal combustion engines are the prime movers whose waste heat is recovered for house heating or driving absorption chillers. PV-wind devices are added to reduce the fuel consumption and total cost. The optimal design method and optimal operation strategy are proposed basing on hourly analyses. Influences of the device cost and fuel price on the optimal dispatch strategies are discussed. Results show that all of the excess energy from the PV-wind system is not worth being stored by the battery. The hybrid CCHP system can be more economical and higher efficient in the studied case.

Development of Double Gear Fuel Pump for Heat Management Improvement

2010 ◽  
Vol 132 (8) ◽  
Author(s):  
Yasushi Matsunaga ◽  
Noriko Morioka ◽  
Seiei Masuda ◽  
Masahiro Kurosaki
Keyword(s):  
Fuel Consumption ◽  
High Efficiency ◽  
Mode Switching ◽  
Gear Pump ◽  
Management Problem ◽  
Fuel Temperature ◽  
Heat Management ◽  
Pump System ◽  
Fuel Pump ◽  
Pump Speed

A unique double gear fuel pump system with operation mode switching capability for aircraft engines was developed to solve the heat management problem of current high efficiency turbofan engines and improve specific fuel consumption (SFC). Mode switching from parallel operations to series operations was found to reduce the discharge flow and pump work to nearly half. This resulted in the reduction of the rise in fuel temperature due to the fuel recirculation at the high altitude low Mach number flight condition. Air cooled oil cooler (ACOC) is usually required for sufficient oil cooling at descent or approach flight conditions. Since fuel consumption at those conditions is not very high, most of the gear pump discharge fuel flow proportional to the engine speed is returned to the fuel pump inlet resulting in significant heating. The ACOC that provides additional cooling capability degrades SFC due not only to the increased weight but also to the wasted fan discharge air. By reducing fuel temperature rise at the pump at those flight conditions, the necessity of ACOC may be eliminated. Further, it is shown that a reduction by half of the double gear pump weight can be achieved by increasing pump speed twice without incurring a durability penalty. Extensive tests showed sufficient steady state pump performance, switching characteristics, and durability.

scholarly journals The Use Of Microturbines as an Energy Converter For Motor Transport

2019 ◽  
Vol 8 (10) ◽  
pp. 2700-2703
Keyword(s):  
Fuel Consumption ◽  
High Speed ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Motor Vehicles ◽  
Turbine Engine ◽  
Range Extender ◽  
Traction Motors

At this stage of the development of vehicles with a combined power plant, one of the areas of development is the study of the introduction of a low-power gas turbine engine, the so-called microturbine, as a converter of thermal energy into mechanical. This solution has numerous positive aspects related to its fuel consumption, small dimensions, high efficiency, as well as a number of performance indicators. In this case, the vehicle is also equipped with a high-speed generator with the goal of converting the mechanical energy of the microturbine into electrical energy. This ensures the microturbine operation in a given range on the characteristic of optimal fuel consumption. The article contains an analysis of the use of microturbine generators in vehicles; some constructive solutions are considered as well. An overview of vehicles with microturbine generators and their comparison with traditional internal combustion engines is given. The movement of the vehicle is carried out by one or several traction motors. More than ten developments of motor vehicles using the microturbine as an additional source of energy for vehicles with traction electric drive are already known in the world, including MiTRE (Microturbine Range Extender). Among such vehicles, one can name the Trolza "Ecobus" buses, Delta Hypercar supercar, Isuzu NPR trucks, Mack Truck, Kenworth.

scholarly journals INCREASE OF POWER EFFICIENCY OF DIESEL ENGINES OF TYPE OF M62

2015 ◽  
Vol 2 (158) ◽  
Author(s):  
Sergiyi Zhalkin ◽  
Roman Gumenyuk
Keyword(s):  
Fuel Consumption ◽  
Environmental Degradation ◽  
Diesel Engines ◽  
Power Efficiency ◽  
High Efficiency ◽  
Economic Situation ◽  
Economic Indicators ◽  
General Motors ◽  
General Electric

Freight locomotives of Ukrainian railways has worked regulatory deadline, more than 300 sections ofМ62, 2М62, 2М62У were built in 1975-1987. An excess lifespan led to decrease economic indicators due toincrease fuel consumption, increase the volurrie of repairs, environmental degradation. Neverthelessfinancial and economic situation does not allow renewing the locomotive fleet. That is why modernization oflocomotives is carried out. We have the experience of complex modernization of diesel locomotives type M62by design of general motors and general electric firms. Its cost value is equal to 80-85% of new diesellocomotive cost. The replacement of outdated engines is less radical, it showed high efficiency.

Sign in / Sign up

Export Citation Format

Share Document