Roller crushers in iron mining, how does the degradation of Hadfield steel components occur?

2021 ◽  
Vol 122 ◽  
pp. 105295
Author(s):  
Luis Bernardo Varela ◽  
Gustavo Tressia ◽  
Mohammad Masoumi ◽  
Eleir Mundim Bortoleto ◽  
Cintia Regattieri ◽  
...  
Keyword(s):  
Alloy Digest ◽  
1976 ◽  
Vol 25 (4) ◽  

Abstract Climax 6Mn-1Mo alloy is a lean austenitic manganese steel which develops a structure similar to that of the well-known Hadfield manganese steel after heat treatment. A lower carbon version of this alloy has been developed to give satisfactory performance in the as-cast condition. Largely because of lower manganese content, these alloys have better abrasion resistance but lower toughness and ductility than Hadfield steel. Both alloys are designed for the many applications where a combination of good wear resistance and moderate toughness is desirable. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SA-322. Producer or source: Climax Molybdenum Company, A Division of Amax Inc..


2020 ◽  
pp. 306-308
Author(s):  
V.S. Bochkov

The relevance of the search for solutions to increase the wear resistance of bucket teeth of excavating machine type front shovel is analyzed. The reasons for the wear of the teeth are considered. It is determined that when excavating machines work for rocks of VIII and IX categories, impact-abrasive wear of the inner side of the teeth and abrasive external wear occurs. It is proved that the cold-work hardening of Hadfield steel (the teeth material), which occurs during the excavating machine teeth work in the rocks of VIII and IX categories, reduces the impact-abrasive wear rate on the inner side of the teeth and does not affect the abrasive wear of the outer. The methods for thermomechanical treatment of the outer side of the excavating machine tooth is proposed. It can increase the wear resistance of Hadfield steel (110G13L) up to 1.7 times and lead to the self-sharpening effect of the tooth due to equalization of the wear rate of the outer and inner parts of the tooth. The efficiency factor of thermomechanical treatment to reduce the of abrasive wear rate of Hadfield steel is experimentally proved.


2020 ◽  
pp. 252-255
Author(s):  
V.I. Bolobov ◽  
V.S. Bochkov ◽  
E.V. Akhmerov ◽  
V.A. Plashchinsky ◽  
E.A. Krivokrisenko E.A.

On the example of Hadfield steel, as the most common material of fast-wearing parts of mining equipment, the effect of surface hardening by plastic deformation on their impact and abrasive wear resistance is considered. Wear test is conducted on magnetic ironstone as typical representative of abrasive and hard rock. As result of wear of initial samples with hardness of ∼200 HB and samples pre-hardened with different intensities to the hardness of 300, 337 and 368 HB, it is found that during the initial testing period, the initial samples pass the “self-cold-work hardening” stage with increase in hardness to ∼250 HB, which remains virtually unchanged during further tests; the hardness of the pre-hardened samples does not change significantly throughout the tests. It is established that the rate of impact-abrasive wear of pre-hardened samples is significantly (up to 1.4 times) lower than the original ones that are not subjected to plastic deformation, and decreases with increasing degree of cold-work hardening. Preliminary surface hardening by plastic deformation can serve as effective way to increase the service life of fast-wearing working parts of mining equipment.


Author(s):  
E. Yu. Geraschenkova ◽  
A. F. Vasiliev ◽  
E. A. Samodelkin ◽  
B. V. Farmakovsky

This article presents the results of the development of technology for producing clad powder and coatings based on it. The possibility of obtaining a clad powder using high-speed mechanosynthesis in disintegrator plants is shown on the example of the Hadfield steel – aluminum powder composition.


1939 ◽  
Vol 45 (1) ◽  
pp. 141-141
Author(s):  
Helen MacGill Hughes
Keyword(s):  

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 849
Author(s):  
Cecilio F. Caldeira ◽  
Madson O. Lima ◽  
Silvio J. Ramos ◽  
Markus Gastauer

Native species may have adaptive traits that are advantageous for overcoming the adverse environmental conditions faced during the early stages of mine land rehabilitation. Here, we examined the nitrogen (N) growth responses of two native perennial grasses (Axonopus longispicus and Paspalum cinerascens) from canga in nutrient-poor iron mining substrates. We carried out vegetative propagation and recovered substantial healthy tillers from field-collected tussocks of both species. These tillers were cultivated in mining substrates at increasing N levels. The tillering rates of both species increased with the N application. Nonetheless, only in P. cinerascens did the N application result in significant biomass increase. Such growth gain was a result of changes in leaf pigment, stomatal morphology, gas exchanges, and nutrients absorption that occurred mainly under the low N additions. Reaching optimum growth at 80 mg N dm−3, these plants showed no differences from those in the field. Our study demonstrates that an input of N as fertilizer can differentially improve the growth of native grasses and that P. cinerascens plants are able to deposit high quantities of carbon and protect soil over the seasons, thus, making them promising candidates for restoring nutrient cycling, accelerating the return of other species and ecosystem services.


2014 ◽  
Vol 16 (02) ◽  
pp. 1450010 ◽  
Author(s):  
ANA CECI MOTA ◽  
EMILIO LÈBRE LA ROVERE ◽  
ALBERTO FONSECA

Historical records of socio-environmental impacts related to large-scale iron ore development in Brazil are driving different planning approaches in the burgeoning iron mining and smelting complex of Corumbá, located at the border of the Pantanal ecosystem in the Brazilian state of Mato Grosso do Sul. Among the most relevant efforts are two strategic environmental assessments (SEA): one was led by a mining company and the other by a civil society committee. This paper assesses to what extent these SEAs can contribute to the mitigation of negative socio-environmental impacts of the Corumbá Complex. It also evaluates if the SEA methodologies meet a number of SEA Performance Criteria. The analyses, which were based on literature reviews and content analysis of the SEA documents, reveal that the two SEAs represent an important effort to incorporate environmental variables into more strategic levels of the Pantanal region's planning. Nonetheless, both SEAs have serious limitations, given that they are not formally nested in governmental policies, plans and programmes.


2017 ◽  
Vol 6 (6) ◽  
pp. 591-597 ◽  
Author(s):  
M. Martín ◽  
M. Raposo ◽  
O. Prat ◽  
M. F. Giordana ◽  
J. Malarría
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document