scholarly journals Experimental study of physical and rheological properties of grape juice using different temperatures and concentrations. Part I: Cabernet Sauvignon

2017 ◽  
Vol 100 ◽  
pp. 724-730 ◽  
Author(s):  
Maurício Bonatto Machado de Castilhos ◽  
Lilian Fachin Leonardo Betiol ◽  
Gisandro Reis de Carvalho ◽  
Javier Telis-Romero
2018 ◽  
Vol 105 ◽  
pp. 905-912 ◽  
Author(s):  
Maurício Bonatto Machado de Castilhos ◽  
Lilian Fachin Leonardo Betiol ◽  
Gisandro Reis de Carvalho ◽  
Javier Telis-Romero

2018 ◽  
Vol 18 (2) ◽  
pp. 115-131
Author(s):  
Liang Heng-Yu ◽  
Su Ning ◽  
Guo Kun ◽  
Wang Yuan ◽  
Yang De-Yu

Five Saccharomyces cerevisiae strains (Chinese indigenous yeasts SC5, WC5, SC8, CC17 and commercial starter F15) were inoculated into Cabernet sauvignon grape must and fermented at pilot scale. For the first time, combination of 1H NMR, HS-SPME/GC-MS and HPLC-DAD-ESI-MS/MS metabonomic profiling techniques was performed to analyze the global chemical fingerprints of sampled wines at the end of alcoholic and malolactic fermentation respectively, then 13 non-volatile flavor compounds, 52 volatile organic aromas and 43 polyphenolic molecules were identified and determined correspondently. All principal component analysis (PCA) of two fermentation stages based on the analytical results of 1H NMR, HS-SPME/GC-MS and HPLC-DAD-ESI-MS/MS divided these strains into three clusters: (1) SC5 and SC8, (2) WC5 and F15 and (3) CC17. The wine fermented by indigenous yeast, CC17, showed a very unique chemical profile, such as low pH and high color intensity, reduced amino acids (including proline) and the lowest total higher alcohols levels, most of the fixed acids, glycerol, ethyl esters and anthocyanins concentrations. The statistical results indicate that CC17 strain possesses very special anabolism and catabolism abilities on such substances in grape juice and has potentiality to produce characteristic wines with high qualities.


Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 681
Author(s):  
Monika Sterczyńska ◽  
Marek Zdaniewicz ◽  
Katarzyna Wolny-Koładka

During the production of beer, and especially beer wort, the main wastes are spent grain and hot trub, i.e., the so-called “hot break.” Combined with yeast after fermentation, they represent the most valuable wastes. Hot trub is also one of the most valuable by-products. Studies on the chemical composition of these sediments and their rheological properties as waste products will contribute to their effective disposal and even further use as valuable pharmaceutical and cosmetic raw materials. So far, hot trub has been studied for morphology and particle distribution depending on the raw material composition and beer wort extract. However, there are no preliminary studies on the rheological properties of hot trub and hops. In particular, no attention has yet been paid to the dependence of these properties on the hop variety or different protein sources used. The aim of this study was to examine the effect of different hopping methods on hot trub viscosity and beer wort physicochemical parameters. Additionally, the hop solutions were measured at different temperatures. A microbiological analysis of hop sediments was also performed to determine the post-process survival of selected microorganisms in these wastes. For manufacturers of pumps used in the brewing industry, the most convenient material is that of the lowest viscosity. Low viscosity hot trub can be removed at lower velocities, which reduces costs and simplifies washing and transport. The sediments also had similar equilibrium viscosity values at high shear rates.


2016 ◽  
Vol 153 ◽  
pp. 37-42 ◽  
Author(s):  
Pengfei Liu ◽  
Mingming Zhu ◽  
Zhezi Zhang ◽  
Yee-kwong Leong ◽  
Yang Zhang ◽  
...  

Author(s):  
Manish Dak ◽  
Radha Charan Verma ◽  
S N A Jaaffrey

Rheological properties of tomato concentrate were evaluated using a wide-gap rotational viscometer (Brookfield Engineering Laboratories: Model LVDV-II) at different temperatures of 20, 30, 40, 50, and 60oC, at concentration of 18, 12.18 and 8.04 % total solids, and at appropriate shear rate(1-100 RPM). The power law model was fitted to the experimental results. The values of flow behaviour index (n) were found less than unity (0.23 to 0.82) at all the temperature and the concentration indicating shear-thinning (pseudoplasticity) behaviour of the concentrate. The correlation between the observed consistency coefficient ranging from 0.09 to 65.87 Pa.sn and the inverse absolute temperature has been exhibited by Arrhenius model. Consistency coefficient increased exponentially with increase in the concentration. Statistical model was used for prediction of the consistency coefficient as a function of temperature and concentration which showed a good agreement (r2=0.99) between experimental and theoretical values. The magnitude of activation energy were found to be in the range of 8.6 to 14.08 kJ/mol.K.


Author(s):  
Naoki MISHIMA ◽  
Yasuo TANIGAWA ◽  
Hiroshi MORI ◽  
Yoshiyuki KUROKAWA ◽  
Ken-ichi TERADA ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document