Synthesis, characterization, DFT-TDDFT calculations and optical properties of a novel pyrazole-1,2,3-triazole hybrid thin film

Optik ◽  
2021 ◽  
Vol 247 ◽  
pp. 167971
Author(s):  
Islam H. El Azab ◽  
Adil A. Gobouri ◽  
Tariq A. Altalhi ◽  
H.S. El-Sheshtawy ◽  
N. Almutlaq ◽  
...  
2021 ◽  
Vol 10 (2) ◽  
pp. 163-169
Author(s):  
Ravinder Gaur ◽  
Himanshu Mohan Padhy ◽  
Manikandan Elayaperumal

Abstract. In this short communication, we propose a surface plasmon resonance (SPR) sensor based on a ZnO / Au hybrid thin-film material structure and experimentally investigate its sensitivity improvement. The Kretschmann-based SPR sensor utilizes ZnO thin films and nanostructures for performance enhancement. The advancement in SPR technology relies on a low-cost, high-sensitivity, and high-selectivity sensor. Metal oxide (MO) has been incorporated into the SPR sensor to be used for detection of biological and chemical compounds. ZnO as one of the metal oxides is an attractive material due to its unique physical and optical properties. Numerous techniques for fabrication and characterization of ZnO on SPR gold substrate have been studied. The mechanism for gas and biomolecule detection depends on their interaction with the ZnO surface, which is mainly attributed to the high isoelectric point of ZnO. There are several types of ZnO nanostructures which have been employed for SPR application based on the Kretschmann configuration. In the future, the thin film and nanostructures of ZnO could be a potential application for miniature design, robust, high sensitivity, and a low-cost portable type of SPR biosensor to be used for on-site testing in a real-time and label-free manner. The present work includes the application of a developed SPR setup for gas sensing at room temperature using a specially designed gas cell. The change in the optical properties of dielectric layers (ZnO) with adsorption of gases (NO2) in order to develop an optical sensor has been presented. The obtained results emphasize the applications of an SPR setup for the study of interaction of adsorbed gas molecules, with dielectrics and gas sensing.


2015 ◽  
Vol 15 (10) ◽  
pp. 8199-8204
Author(s):  
Jae Seok An ◽  
Ha Jun Jang ◽  
Cheol Young Park ◽  
Hongseok Youn ◽  
Jong Ho Lee ◽  
...  

Inorganic/organic hybrid thin film encapsulation layers consist of a thin Al2O3 layer together with polymer material. We have investigated optical properties of thin film encapsulation layers for topemission flexible organic light-emitting diodes. The transmittance of hybrid thin film encapsulation layers and the electroluminescent spectrum of organic light-emitting diodes that were passivated by hybrid organic/inorganic thin film encapsulation layers were also examined as a function of the thickness of inorganic Al2O3 and monomer layers. The number of interference peaks, their intensity, and their positions in the visible range can be controlled by varying the thickness of inorganic Al2O3 layer. On the other hand, changing the thickness of monomer layer had a negligible effect on the optical properties. We also verified that there is a trade-off between transparency in the visible range and the permeation of water vapor in hybrid thin film encapsulation layers. As the number of dyads decreased, optical transparency improved while the water vapor permeation barrier was degraded. Our study suggests that, in top-emission organic light-emitting diodes, the thickness of each thin film encapsulation layer, in particular that of the inorganic layer, and the number of dyads should be controlled for highly efficient top-emission flexible organic light-emitting diodes.


2015 ◽  
Vol 11 (2) ◽  
pp. 3017-3022
Author(s):  
Gurban Akhmedov

Results of researches show, that film p-n the structures received by a method of discrete thermal evaporation in a uniform work cycle, are suitable for use in low-voltage devices.  As a result of work are received p-n heterojunctions in thin-film execution, described by high values of differential resistance. Show that, thermo endurance - T0 maybe using as characteristic of thermo endurance of optic materials. If heating flow, destruction temperature and internal surface temperature is measured during test, it is possible to determine value T0 and other necessity characteristics. As a result of the taking test was lead to comparison evaluation of considered materials. Working range of heating flow and up level heating embark have been determined.


2021 ◽  
Vol 528 ◽  
pp. 167803
Author(s):  
Sergey Lyaschenko ◽  
Olga Maximova ◽  
Dmitriy Shevtsov ◽  
Sergey Varnakov ◽  
Ivan Tarasov ◽  
...  

Author(s):  
Chunxiu Zang ◽  
Mengxin Xu ◽  
Letian Zhang ◽  
Shihao Liu ◽  
Wenfa Xie

Thin film light-emitting devices (LEDs) with sandwich structure, such as organic light emitting devices (OLEDs), quantum dots LEDs (QLEDs) and perovskite LEDs (PeLEDs), have attracted wide attentions because of their...


2020 ◽  
Author(s):  
Mangalika Sinha ◽  
R. K. Gupta ◽  
P. Dasilva ◽  
P. Mercere ◽  
Mohammed H. Modi

2019 ◽  
Vol 75 (3) ◽  
pp. 236-241
Author(s):  
Jun Bin Ko ◽  
Sang Chul Lim ◽  
Seong Hyun Kim

Sign in / Sign up

Export Citation Format

Share Document