Numerical investigation of gas separation via thermally induced flows in ratchet-like patterned microchannels

The performance of most oxidation resistant alloys and coatings is markedly improved if the oxide scale strongly adheres to the substrate surface. Consequently, in order to develop alloys and coatings with improved oxidation resistance, it has become necessary to determine the conditions that lead to spallation of oxides from the surfaces of alloys. In what follows, the morphological features of nonadherent Al2O3, and the substrate surfaces from which the Al2O3 has spalled, are presented and related to oxide spallation.The Al2O3, scales were developed by oxidizing Fe-25Cr-4Al (w/o) and Ni-rich Ni3 (Al,Ta) alloys in air at 1200°C. These scales spalled from their substrates upon cooling as a result of thermally induced stresses. The scales and the alloy substrate surfaces were then examined by scanning and replication electron microscopy.The Al2O3, scales from the Fe-Cr-Al contained filamentary protrusions at the oxide-gas interface, Fig. 1(a). In addition, nodules of oxide have been developed such that cavities were formed between the oxide and the substrate, Fig. 1(a).

Download Full-text

A SEM/TEM examination of a ceramic membrane

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100144802 ◽

1986 ◽

Vol 44 ◽

pp. 682-683

Author(s):

C.E. Voegele-Kliewer ◽

A.D. McMaster ◽

G.W. Dirks

Keyword(s):

Electron Microscopy ◽

Gas Separation ◽

Ceramic Membrane ◽

Hydrogen Iodide ◽

Separation Processes ◽

Corning Glass ◽

Gas Transport Properties ◽

Porous Microstructure ◽

Microscopy Techniques ◽

The Relationship

Materials other than polymers, e.g. ceramic silicates, are currently being investigated for gas separation processes. The permeation characteristics of one such material, Vycor (Corning Glass #1370), have been reported for the separation of hydrogen from hydrogen iodide. This paper will describe the electron microscopy techniques applied to reveal the porous microstructure of a Vycor membrane. The application of these techniques has led to an increased understanding in the relationship between the substructure and the gas transport properties of this material.

Download Full-text

Applications of ultramicrotomy for materials characterization

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100147004 ◽

1993 ◽

Vol 51 ◽

pp. 232-233

Author(s):

R.T. Blackham ◽

J.J. Haugh ◽

C.W. Hughes ◽

M.G. Burke

Keyword(s):

Materials Science ◽

Microstructural Analysis ◽

Analytical Electron Microscopy ◽

Austenitic Stainless Steels ◽

Specimen Preparation ◽

Preparation Technique ◽

Thermally Induced ◽

Radiation Induced ◽

Characterization Of Materials

Essential to the characterization of materials using analytical electron microscopy (AEM) techniques is the specimen itself. Without suitable samples, detailed microstructural analysis is not possible. Ultramicrotomy, or diamond knife sectioning, is a well-known mechanical specimen preparation technique which has been gaining attention in the materials science area. Malis and co-workers and Glanvill have demonstrated the usefulness and applicability of this technique to the study of a wide variety of materials including Al alloys, composites, and semiconductors. Ultramicrotomed specimens have uniform thickness with relatively large electron-transparent areas which are suitable for AEM anaysis.Interface Analysis in Type 316 Austenitic Stainless Steel: STEM-EDS microanalysis of grain boundaries in austenitic stainless steels provides important information concerning the development of Cr-depleted zones which accompany M23C6 precipitation, and documentation of radiation induced segregation (RIS). Conventional methods of TEM sample preparation are suitable for the evaluation of thermally induced segregation, but neutron irradiated samples present a variety of problems in both the preparation and in the AEM analysis, in addition to the handling hazard.

Download Full-text