Tapping the energy potential from wastewater by integrating high-rate activated sludge process with anaerobic membrane bioreactor

2021 ◽  
pp. 130071
Author(s):  
Muxiang Liang ◽  
Xiejuan Lu ◽  
Pingbo Liu ◽  
Xiaohui Wu ◽  
Feixiang Zan
Keyword(s):  
Activated Sludge ◽  
Membrane Bioreactor ◽  
High Rate ◽  
Activated Sludge Process ◽  
Energy Potential ◽  
Anaerobic Membrane Bioreactor

Rehabilitation and Upgrading of the Beni Suef City Wastewater Treatment Plant

1990 ◽  
Vol 22 (7-8) ◽  
pp. 131-138
Author(s):  
Ahmed Fadel
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Primary Treatment ◽  
High Rate ◽  
Shock Load ◽  
Economic Evaluations ◽  
Activated Sludge Process ◽  
Trickling Filter

Many of Egypt's cities have existing treatment plants under operation that have been constructed before 1970. Almost all of these treatment plants now need rehabilitation and upgrading to extend their services for a longer period. One of these plants is the Beni Suef City Wastewater Treatment Plant. The Beni Suef WWTP was constructed in 1956. It has primary treatment followed by secondary treatment employing intermediate rate trickling filters. The BOD, COD, and SS concentration levels are relatively high. They are approximately 800, 1100, and 600 mg/litre, respectively. The Beni Suef city required the determination of the level of work needed for the rehabilitation and upgrading of the existing 200 l/s plant and to extend its capacity to 440 l/s at year 2000 A description of the existing units, their deficiencies and operation problems, and the required rehabilitation are presented and discussed in this paper. Major problems facing the upgrading were the lack of space for expansion and the shortage of funds. It was, therefore, necessary to study several alternative solutions and methods of treatment. The choice of alternatives was from one of the following schemes: a) changing the filter medium, its mode of operation and increasing the number of units, b) changing the trickling filter to high rate and combining it with the activated sludge process, for operation by one of several possible combinations such as: trickling filter-solids contact, roughing filter-activated sludge, and trickling filter-activated sludge process, c) dividing the flow into two parts, the first part to be treated using the existing system and the second part to be treated by activated sludge process, and d) expanding the existing system by increasing the numbers of the different process units. The selection of the alternative was based on technical, operational and economic evaluations. The different alternatives were compared on the basis of system costs, shock load handling, treatment plant operation and predicted effluent quality. The flow schemes for the alternatives are presented. The methodology of selecting the best alternative is discussed. From the study it was concluded that the first alternative is the most reliable from the point of view of costs, handling shock load, and operation.

High rate and compact single sludge pre-denitrification process for retrofit

1994 ◽  
Vol 30 (6) ◽  
pp. 31-40 ◽  
Author(s):  
Hiroyshi Emori ◽  
Hiroki Nakamura ◽  
Tatsuo Sumino ◽  
Tadashi Takeshima ◽  
Katsuzo Motegi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Sewage Treatment ◽  
Treatment Plant ◽  
High Rate ◽  
Activated Sludge Process ◽  
Nitrogen And Phosphorus ◽  
Conventional Activated Sludge ◽  
Treatment Techniques ◽  
Conventional Activated Sludge Process ◽  
Denitrification Process

For the sewage treatment plants near rivers and closed water bodies in urbanized areas in Japan and European countries, there is a growing demand for introduction of advanced treatment processes for nitrogen and phosphorus from the viewpoints of water quality conservation and environmental protection. In order to remove nitrogen by the conventional biological treatment techniques, it is necessary to make a substantial expansion of the facility as compared with the conventional activated sludge process. In such urbanized districts, it is difficult to secure a site and much capital is required to expand the existing treatment plant. To solve these problems, a compact single sludge pre-denitrification process using immobilized nitrifiers was developed. Dosing the pellets, which are suitable for nitrifiers growth and physically durable, into the nitrification tank of single sludge pre-denitrification process made it possible to perform simultaneous removal of BOD and nitrogen in a retention time equal to that in the conventional activated sludge process even at the low water temperature of about 10 °C. The 3,000 m3/d full-scale conventional activated sludge plant was retrofitted and has been successfully operated.

Development of a high-rate submerged anaerobic membrane bioreactor

2017 ◽  
Vol 39 (5) ◽  
pp. 640-650 ◽  
Author(s):  
I. Mahmoud ◽  
W. J. Gao ◽  
B. Q. Liao ◽  
J. Cumin ◽  
M. Dagnew ◽  
...  
Keyword(s):  
Membrane Bioreactor ◽  
High Rate ◽  
Anaerobic Membrane Bioreactor

Intelligent control system based on blackboard concept for wastewater treatment processes

1998 ◽  
Vol 37 (12) ◽  
pp. 77-85 ◽  
Author(s):  
T. Ohtsuki ◽  
T. Kawazoe ◽  
T. Masui
Keyword(s):  
Wastewater Treatment ◽  
Control System ◽  
Activated Sludge ◽  
Intelligent Control ◽  
Software Agents ◽  
High Rate ◽  
Target System ◽  
Activated Sludge Process ◽  
Intelligent Control System ◽  
Treatment Processes

An intelligent control system for wastewater treatment processes has been developed and applied to fullscale, high-rate, activated sludge process control. In this control system, multiple software agents that model the target system using their own modeling method collaborate by using data stored in an abstracted database named ‘blackboard’. The software agents, which are called ‘expert modules’, include a fuzzy expert system, a fuzzy controller, a theoretical activated sludge model, and evaluators of raw data acquired by various online sensors including a respirometer. In this paper, the difficulties of controlling an activated sludge system by using a single conventional strategy are briefly reviewed, then our approach to overcome these difficulties by using multiple modeling methods in the framework of an ‘intelligent control system’ is proposed. Case studies of applications to a high-rate activated sludge process that treats BOD and nitrogen of human excrement are also presented.

Removal Efficiencies of Indicator Micro-Organisms in Sewage Treatment Plants

1989 ◽  
Vol 21 (3) ◽  
pp. 119-124 ◽  
Author(s):  
T. Omura ◽  
M. Onuma ◽  
J. Aizawa ◽  
T. Umita ◽  
T. Yagi
Keyword(s):  
Activated Sludge ◽  
Sewage Treatment ◽  
High Rate ◽  
Coliform Bacteria ◽  
Minor Role ◽  
Activated Sludge Process ◽  
Trickling Filter ◽  
Sewage Treatment Plants ◽  
Micro Organisms ◽  
Chlorine Residuals

The removal of coliform bacteria, enterococcus bacteria, and coliphages in two sewage treatment plants, one using the activated sludge process and the other using a high-rate trickling filter, was investigated over a period of one year. Coliform and enterococcus bacteria were removed with equal efficiency by the two plants, but coliphages were removed more efficiently by the activated sludge process. Experiments on the mechanism of removal revealed that it was mainly due to adsorption on the activated sludge and on the slime in the trickling filter. Die-off of the micro-organisms seemed to play a minor role in the reduction in counts. The treated sewage was disinfected by chlorination prior to discharge into the receiving water. No coliforms were detected in the chlorinated effluents when they had chlorine residuals in the range of 0 to 1.521 mg/l. However, enterococci were detected when chlorine residuals dropped below 0.598 mg/l. Coliphages proved to be the most resistant organisms and they were generally detected throughout the range of chlorine residuals encountered.

Feasibility of the membrane bioreactor process for water reclamation

2001 ◽  
Vol 43 (10) ◽  
pp. 203-209 ◽  
Author(s):  
S. Adham ◽  
P. Gagliardo ◽  
L. Boulos ◽  
J. Oppenheimer ◽  
R. Trussell
Keyword(s):  
Literature Review ◽  
Activated Sludge ◽  
Membrane Bioreactor ◽  
Cost Evaluation ◽  
Water Reclamation ◽  
Activated Sludge Process ◽  
Conventional Activated Sludge ◽  
In Series ◽  
Volumetric Loading ◽  
Conventional Activated Sludge Process

The feasibility of the membrane bioreactor (MBR) process for water reclamation was studied. Process evaluation was based on the following: literature review of MBRs, worldwide survey of MBRs, and preliminary costs estimates. The literature review and the survey have shown that the MBR process offers several benefits over the conventional activated sludge process, including: smaller space and reactor requirements, better effluent water quality, disinfection, increased volumetric loading, and less sludge production. The MBR process can exist in two different configurations, one with the low-pressure membrane modules replacing the clarifier downstream the bioreactor (in series), and the second with the membranes submerged within the bioreactor. Four major companies are currently marketing MBRs while many other companies are also in the process of developing new MBRs. The MBR process operates in a considerably different range of parameters than the conventional activated sludge process. The preliminary cost evaluation has shown that the MBR process is cost competitive with other conventional wastewater treatment processes.

Sign in / Sign up

Export Citation Format

Share Document