Orientation control and dielectric properties of sol–gel deposited Ba(Sn0.15Ti0.85)O3 thin films grown on Pt/Ti/SiO2/Si substrates

2007 ◽  
Vol 308 (1) ◽  
pp. 223-227 ◽  
Author(s):  
S.N. Song ◽  
J.W. Zhai ◽  
X. Yao
2010 ◽  
Vol 150-151 ◽  
pp. 112-117 ◽  
Author(s):  
Min Xian Shi ◽  
Wei Mao ◽  
Yan Qin ◽  
Zhi Xiong Huang ◽  
Dong Yun Guo

Pb(Zr0.53Ti0.47)O3 thin films with thickness of 120nm, 190nm, 310nm, 440nm and 630nm were deposited on Pt/Ti/SiO2/Si substrates by sol-gel process through repeating spining process 2 times, 4 times, 6 times, 8 times and 10 times respectively. The structures of PZT films were investigated by SEM and XRD analysis. The ferroelectric hysteresis loops were recorded by Radiant Precision Workstation and dielectric properties were measured using an Agilent HP4294A impedance analyzer. X-ray diffraction indicated that with the film thickness increasing, the diffraction intensity increased. The thickness of PZT film had great effect on ferroelectric and dielectric properties. Conclusively when the film thickness was about 310nm, the PZT thin films possessed better ferroelectric and dielectric properties.


2004 ◽  
Vol 262 (1-4) ◽  
pp. 341-347 ◽  
Author(s):  
Zhai Jiwei ◽  
Yao Xi ◽  
Zhang Liangying ◽  
Shen Bo ◽  
Haydn Chen

2020 ◽  
Author(s):  
Monali Mishra ◽  
Smrutirekha Swain ◽  
Sukalyan Dash ◽  
Somdutta Mukherjee

Abstract In this work, GaFeO 3 thin films are deposited on Pt/Si substrates using sol-gel spin coating technique. The effect of these films on different properties such as: structural, optical and electrical properties are investigated. X- ray diffraction (XRD) confirms that GaFeO 3 has orthorhombic Pc2 1 n symmetry. Scanning electron microscopy reveals the uniform distribution of sol and crack free nature of the films. The optical absorption spectrum was recorded using DRS UV-Vis which showed the thin films are absorbed in the visible region. We have also performed experimentally which determines the flat band potential using Mott-Schottky equation. The width of the space charge region and charge carrier concentration of the thin films is also calculated. The dielectric properties of the thin films are also studied in this paper. This work opens up the possibility for the polycrystalline GaFeO 3 thin films to be used as phototelectrodes.


2015 ◽  
Vol 3 (9) ◽  
pp. 2115-2122 ◽  
Author(s):  
Wei Sun ◽  
Jing-Feng Li ◽  
Qi Yu ◽  
Li-Qian Cheng

We prepared high-quality Bi1−xSmxFeO3 films on Pt(111)/Ti/SiO2/Si substrates by sol–gel processing and found rhombohedral–orthorhombic phase transition with enhanced piezoelectricity.


2011 ◽  
Vol 197-198 ◽  
pp. 1781-1784
Author(s):  
Hua Wang ◽  
Jian Li ◽  
Ji Wen Xu ◽  
Ling Yang ◽  
Shang Ju Zhou

Intergrowth-superlattice-structured SrBi4Ti4O15–Bi4Ti3O12(SBT–BIT) films prepared on p-Si substrates by sol-gel processing. Synthesized SBT–BIT films exhibit good ferroelectric properties. As the annealing temperature increases from 600°C to 700°C, the remanent polarization Prof SBT–BIT films increases, while the coercive electric field Ecdecreases. SBT–BIT films annealed at 700°C have a Prvalue of 18.9µC/cm2which is higher than that of SBT (16.8µC/cm2) and BIT (14.6µC/cm2), and have the lowest Ecof 142 kV/cm which is almost the same as that of SBT and BIT. The C-V curves of Ag/SBT-BIT/p-Si heterostructures show the clockwise hysteresis loops which reveal the memory effect due to the polarization. The memory window in C-V curve of Ag/SBT-BIT/p-Si is larger than that of Ag/SBT/p-Si heterostructure or Ag/BIT/p-Si heterostructure.


2010 ◽  
Vol 663-665 ◽  
pp. 650-653
Author(s):  
Jin Moo Byun ◽  
Jeong Sun Han ◽  
Jae Hyoung Park ◽  
Seong Eui Lee ◽  
Hee Chul Lee

This study examined the effect of crystalline orientation and dopants such as Nb and Zn on the piezoelectric coefficient of sol-gel driven Pb1(Zr0.52Ti0.48)O3(PZT) and doped PZT thin films. Crack-free 1-μm-thick PZT and doped PZT thin films prepared by using 2-Methoxyethanol-based sol-gel method were fabricated on Pt/Ti/SiO2/Si substrates. The highly (111) oriented PZT thin films of pure perovskite structure could be obtained by controlling various parameters such as a PbTiO3 seed layer and a concentration of sol-gel solution. The Nb-Zn doped PZT thin films exhibited high piezoelectric coefficient which was about 50 % higher than that of undoped PZT thin film. The highest measured piezoelectric coefficient was 240 pC/N, which could be applicable to piezoelectrically operated MEMS actuator, sensor, or energy harvester devices.


Vacuum ◽  
2005 ◽  
Vol 77 (3) ◽  
pp. 329-335 ◽  
Author(s):  
S. Yildirim ◽  
K. Ulutas ◽  
D. Deger ◽  
E.O. Zayim ◽  
I. Turhan

Sign in / Sign up

Export Citation Format

Share Document