The effects of partial shear connection in the hogging moment regions of composite beams Part II—Analytical study

2004 ◽  
Vol 60 (6) ◽  
pp. 921-962 ◽  
Author(s):  
H.Y. Loh ◽  
B. Uy ◽  
M.A. Bradford
Keyword(s):  
Analytical Study ◽  
Composite Beams ◽  
Shear Connection

FIRE RESISTACE OF SHEAR CONNECTORS FOR COMPOSITE BEAMS

2020 ◽  
Vol 92 (6) ◽  
pp. 59-65
Author(s):  
G.P. TONKIH ◽  
◽  
D.A. CHESNOKOV ◽  
◽  
Keyword(s):  
Fire Resistance ◽  
Composite Structure ◽  
Composite Structures ◽  
Composite Beams ◽  
Design Codes ◽  
Connection Strength ◽  
Shear Connectors ◽  
Shear Connection ◽  
Capacity Reduction ◽  
Russian Research

Most of Russian research about composite structure fire resistance are dedicated to the composite slab behavior. The composite beams fire resistance had been never investigated in enough volume: the temperature evaluation within the scope of the actual Russian design codes leads to the significant reduction in the shear connection strength. Meanwhile, there no correlation between the strength decreasing and type of the shear connection. The article provides an overview of the relevant researches and offers some approaches which could take into account bearing capacity reduction of the shear connectors within composite structures design.

scholarly journals Test and Numerical Model of Curved Steel–Concrete Composite Box Beams under Positive Moments

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2978
Author(s):  
Zhi-Min Liu ◽  
Xue-Jin Huo ◽  
Guang-Ming Wang ◽  
Wen-Yu Ji
Keyword(s):  
Finite Element ◽  
Static Loading ◽  
Composite Beams ◽  
Parameter Analysis ◽  
Outer Side ◽  
Finite Element Models ◽  
Test Results ◽  
Rotational Angle ◽  
Shear Connection ◽  
Box Beams

Compared with straight steel–concrete composite beams, curved composite beams exhibit more complicated mechanical behaviors under combined bending and torsion coupling. There are much fewer experimental studies on curved composite beams than those of straight composite beams. This study aimed to investigate the combined bending and torsion behavior of curved composite beams. This paper presents static loading tests of the full elastoplastic process of three curved composite box beams with various central angles and shear connection degrees. The test results showed that the specimens exhibited notable bending and torsion coupling force characteristics under static loading. The curvature and interface shear connection degree significantly affected the force behavior of the curved composite box beams. The specimens with weak shear connection degrees showed obvious interfacial longitudinal slip and transverse slip. Constraint distortion and torsion behavior caused the strain of the inner side of the structure to be higher than the strain of the outer side. The strain of the steel beam webs was approximately linear. In addition, fine finite element models of three curved composite box beams were established. The correctness and applicability of the finite element models were verified by comparing the test results and numerical calculation results for the load–displacement curve, load–rotational angle curve, load–interface slip curve, and cross-sectional strain distribution. Finite element modeling can be used as a reliable numerical tool for the large-scale parameter analysis of the elastic–plastic mechanical behavior of curved composite box beams.

Free Vibration Analysis for Tapered Cross-Section Steel-Concrete Composite Material Beam

2017 ◽  
Vol 893 ◽  
pp. 380-383
Author(s):  
Jun Xia ◽  
Z. Shen ◽  
Kun Liu
Keyword(s):  
Finite Element ◽  
Composite Material ◽  
Cross Section ◽  
Vibration Analysis ◽  
Free Vibration Analysis ◽  
Element Model ◽  
Composite Beams ◽  
Shear Connection ◽  
The Common ◽  
Interlayer Slip

The tapered cross-section beams made of steel-concrete composite material are widely used in engineering constructions and their dynamic behavior is strongly influenced by the type of shear connection jointing the two different materials. The 1D high order finite element model for tapered cross-section steel-concrete composite material beam with interlayer slip was established in this paper. The Numerical results for vibration nature frequencies of the composite beams with two typical boundary conditions were compared with ANSYS using 2D plane stress element. The 1D element is more efficient and economical for the common tapered cross-section steel-concrete composite material beams in engineering.

Adhesive as a Permanent Shear Connection for Composite Beams

2018 ◽  
pp. 471-499
Author(s):  
Wolfgang Kurz ◽  
Markus Kludka ◽  
Ruben Friedland ◽  
Paul-Ludwig Geiß
Keyword(s):  
Composite Beams ◽  
Shear Connection

Reliability analysis of shear connection in composite beams with profiled steel sheeting

2011 ◽  
Vol 8 (1) ◽  
pp. 29-34
Author(s):  
M. Youcef ◽  
M. Mimoune ◽  
F. Mimoune
Keyword(s):  
Reliability Analysis ◽  
Failure Modes ◽  
Composite Beams ◽  
Steel Beam ◽  
British Standard ◽  
Shear Connectors ◽  
Shear Connection ◽  
Composite Slabs ◽  
European Code ◽  
Headed Stud

This paper describes the reliability analysis of shear connection in composite beams with profiled steel sheeting. The profiled steel sheeting had transverse ribs perpendicular to the steel beam. The level of safety of shear connection, and failure modes were determinate. An extensive parametric study was conducted to study the effects on the safety and behaviour of shear connection by changing the profiled steel sheeting geometries, the diameter and height of headed stud, as well as the strength of concrete. We compared the level safety calculated using the American specification, British standard and European code for headed stud shear connectors in composite slabs with profiled steel sheeting perpendicular to the steel beam. It is found that the design overestimated the level safety of shear connection.

Dynamic Analysis of Steel-Concrete Composite Frames with Partial Interaction

2012 ◽  
Vol 594-597 ◽  
pp. 904-907 ◽  
Author(s):  
Jun Xia ◽  
Z. Shen ◽  
Bin Chen
Keyword(s):  
Boundary Condition ◽  
Free Vibration ◽  
Dynamic Analysis ◽  
Free Vibration Analysis ◽  
Slip Boundary Condition ◽  
Composite Beams ◽  
Free Vibrations ◽  
Frame Structures ◽  
Shear Connection ◽  
Slip Boundary

The finite element formulations of steel-concrete composite (SCC) beams considering interlayer slip with end shear restraint were established. Free vibrations of SCC beams and frame structures under different slip boundary conditions were examined. The influences of the shear connection stiffness and the slip boundary condition on dynamic characteristics were analyzed. It is shown that the low order 8-DOF element may exhibit slip locking phenomenon in free vibration analysis for very stiff connection. The free vibration frequencies of composite beams and frame structures increase with the shear connection stiffness increasing. Besides, it is found that the natural vibration properties of SCC frame structures are significantly affected by the slip boundary condition, and it should be suitably imposed on all composite beams in dynamic analysis.

Sign in / Sign up

Export Citation Format

Share Document