The microstructure, mechanical properties, corrosion performance and biocompatibility of hydroxyapatite reinforced ZK61 magnesium-matrix biological composite

2021 ◽  
pp. 104759
Author(s):  
Yunting Guo ◽  
Guangyu Li ◽  
Yingchao Xu ◽  
Zezhou Xu ◽  
Mingqi Gang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Performance ◽  
Magnesium Matrix

Effect of Composite Master Alloy on Mechanical Properties and Electrochemical Corrosion of ZL101 Alloy

2013 ◽  
Vol 749 ◽  
pp. 407-413
Author(s):  
Hong Xu ◽  
Xin Zhang ◽  
Ji Ping Ren ◽  
Min Peng ◽  
Shi Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Grain Refinement ◽  
Master Alloy ◽  
Mass Fraction ◽  
Electrochemical Corrosion ◽  
Corrosion Performance ◽  
Obvious Effect ◽  
Mechanical Properties And Corrosion

The mechanical properties and corrosion performances of the ZL101 alloy modified by the composite master alloy were investigated. The results showed that the master alloy had not only obvious effect of grain refinement, but also a significant role in refining dendrite grain of ZL101 alloy. The grain size decreased dramatically from 150μm to 62μm when the addition of composite master alloy is up to 0.5%(mass fraction) and the temperature is 720 for 30 minutes,. Its tensile strength and elongation increased by 27% and 42% respectively. The grain refinement of ZL101 alloy decreased its corrosion performance. The morphology of Si changed into globular from needle modified by NaF, instead of AlTiB.

scholarly journals Enhancing Mechanical Response of Monolithic Magnesium Using Nano-NiTi (Nitinol) Particles

Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1014 ◽  
Author(s):  
Gururaj Parande ◽  
Vyasaraj Manakari ◽  
Saif Wakeel ◽  
Milli Kujur ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Mechanical Response ◽  
Hot Extrusion ◽  
Nickel Titanium ◽  
Structure Property ◽  
Microstructural Characteristics ◽  
Magnesium Matrix ◽  
Melt Deposition ◽  
Synthesized Materials ◽  
Minimal Adverse Effect

The present study focuses on investigating the effects of Nickel-Titanium (NiTi) nanoparticles on the microstructure and properties of pure Mg. Mg composites containing varying weight percentages (0.5, 1, 1.5, 3) of NiTi nanoparticles were fabricated using Disintegrated Melt Deposition (DMD), followed by hot extrusion. The synthesized materials were characterized in order to investigate their physical, microstructural and mechanical properties. Synthesized materials were characterized for their density and porosity levels, microstructural characteristics, and mechanical response. Superior grain refinement was realized by the presence of NiTi nanoparticles in the magnesium matrix. The addition of NiTi nanoparticles resulted in strength property enhancements of pure Mg with minimal adverse effect on the ductility. Structure-property evaluations are detailed in the current study.

MECHANICAL PROPERTIES OF SQUEEZE INFILTRATED AS52 MAGNESIUM MATRIX COMPOSITES

2009 ◽  
Vol 23 (06n07) ◽  
pp. 1510-1515 ◽  
Author(s):  
YONG-HA PARK ◽  
YONG-HO PARK ◽  
IK-MIN PARK ◽  
KYUNG-MOX CHO ◽  
JEONG-JUNG OAK ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Creep Rupture ◽  
Matrix Composites ◽  
Matrix Interface ◽  
Magnesium Matrix ◽  
Magnesium Matrix Composites ◽  
Squeeze Infiltration ◽  
Polygonal Shape ◽  
Creep Rupture Test ◽  
Infiltration Method

Aluminum borate whisker (9( Al 2 O 3)·( B 2 O 3)) reinforced AS52(with and without strontium modification) metal matrix composites (MMC) were fabricated by the squeeze infiltration method. Creep rupture test was carried out at 150°C and 100 MPa condition. Results showed that Alborex reinforcement and modified polygonal shape Mg 2 Si phase contributed to the enhancement of mechanical properties and creep resistance. Creep rupture time was increased 11% and minimum creep rate was decreased 17% in the composite. At the Alborex/matrix interface, uniform thin layer of MgO was formed. The initiation of micro-voids at the reinforcement/matrix or Mg 2 Si /matrix interface was followed by their growth and coalescence to macro-cracks.

Corrosion performance and mechanical properties of joined automotive materials

2011 ◽  
Vol 63 (5) ◽  
pp. 408-415 ◽  
Author(s):  
N. LeBozec ◽  
A. LeGac ◽  
D. Thierry
Keyword(s):  
Mechanical Properties ◽  
Corrosion Performance

Influence of B4C on mechanical properties of AZ91 magnesium matrix composites

2022 ◽  
Author(s):  
G. Pitchayyapillai ◽  
M. Jinnah Sheik Mohamed ◽  
G. Dhanraj ◽  
R. Malkiya Rasalin Prince ◽  
M. Rajeshwaran ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Matrix Composites ◽  
Magnesium Matrix ◽  
Magnesium Matrix Composites ◽  
Az91 Magnesium

scholarly journals Microstructure and Mechanical Properties of Hypo- and Hypereutectic Cast Mg/Mg2Si Composites

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3591
Author(s):  
Katarzyna N. Braszczyńska-Malik ◽  
Marcin A. Malik
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Eutectic Mixture ◽  
Weight Fraction ◽  
Uniaxial Tensile ◽  
Compression Tests ◽  
Magnesium Matrix ◽  
Magnesium Matrix Composites ◽  
Mg2si Phase ◽  
Microstructure And Mechanical Properties

In this paper, the microstructure and mechanical properties of two magnesium matrix composites—a hypoeutectic with 1.9 wt% Mg2Si phase and a hypereutectic with 19 wt% Mg2Si compound—were analyzed. The investigated materials were prepared using the gravity casting method. Microstructure analyses of the fabricated composites were carried out by XRD and light microscopy. The tensile and compression strength as well as yield strength of the composites were examined in both uniaxial tensile and compression tests. The microstructure of the hypoeutectic composite was in agreement with the phase diagram and composed of primary Mg dendrites and an Mg–Mg2Si eutectic mixture. For the hypereutectic composite, besides the primary Mg2Si phase and eutectic mixture, additional magnesium dendrites surrounding the Mg2Si compound were observed due to nonequilibrium solidification conditions. The composites exhibited a rise in the examined mechanical properties with an increase in the Mg2Si weight fraction and also a higher tensile and compression strength in comparison to the pure magnesium matrix (cast in the same conditions). Additionally, analyses of fracture surfaces of the composites carried out using scanning electron microscopy (SEM + EDX) are presented.

Sign in / Sign up

Export Citation Format

Share Document