scholarly journals Enhancing Mechanical Response of Monolithic Magnesium Using Nano-NiTi (Nitinol) Particles

Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1014 ◽  
Author(s):  
Gururaj Parande ◽  
Vyasaraj Manakari ◽  
Saif Wakeel ◽  
Milli Kujur ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Mechanical Response ◽  
Hot Extrusion ◽  
Nickel Titanium ◽  
Structure Property ◽  
Microstructural Characteristics ◽  
Magnesium Matrix ◽  
Melt Deposition ◽  
Synthesized Materials ◽  
Minimal Adverse Effect

The present study focuses on investigating the effects of Nickel-Titanium (NiTi) nanoparticles on the microstructure and properties of pure Mg. Mg composites containing varying weight percentages (0.5, 1, 1.5, 3) of NiTi nanoparticles were fabricated using Disintegrated Melt Deposition (DMD), followed by hot extrusion. The synthesized materials were characterized in order to investigate their physical, microstructural and mechanical properties. Synthesized materials were characterized for their density and porosity levels, microstructural characteristics, and mechanical response. Superior grain refinement was realized by the presence of NiTi nanoparticles in the magnesium matrix. The addition of NiTi nanoparticles resulted in strength property enhancements of pure Mg with minimal adverse effect on the ductility. Structure-property evaluations are detailed in the current study.

Effect of Addition of Nano-Al2O3 and Copper Particulates and Heat Treatment on the Tensile Response of AZ61 Magnesium Alloy

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Q. B. Nguyen ◽  
Y. H. D. Chua ◽  
K. S. Tun ◽  
J. Chan ◽  
R. Kwok ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Magnesium Alloy ◽  
Mechanical Response ◽  
Hot Extrusion ◽  
Secondary Phase ◽  
Secondary Phases ◽  
Microstructural Characteristics ◽  
Tensile Response ◽  
Az61 Magnesium Alloy ◽  
Melt Deposition

In this paper, AZ61 magnesium alloy composites containing nanoalumina and micron-sized copper particulates are synthesized using the technique of disintegrated melt deposition followed by hot extrusion. The simultaneous addition of nano-Al2O3 and copper particulates led to an overall improvement in both microstructural characteristics in terms of distribution and morphology of secondary phases and mechanical response of AZ61. The presence of nanoalumina particulates broke down and dispersed the secondary phase Mg17Al12. The 0.2% yield strength increased from 216 MPa to 274 MPa. The ductility increased from 8.4% to 9.3% in the case of the AZ61-1.5Al2O3 sample. The results of aging heat treatment in the case of the AZ61-1.5Al2O3-1Cu sample showed significant improvement in both tensile strength, ductility, and work of fracture (54% increment). An attempt is made to correlate the tensile response of composites with their microstructural characteristics.

scholarly journals Corrosion Behavior, Microstructure and Mechanical Properties of Novel Mg-Zn-Ca-Er Alloy for Bio-Medical Applications

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 519
Author(s):  
Devadas Bhat Panemangalore ◽  
Rajashekhara Shabadi ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Corrosion Behavior ◽  
Base Material ◽  
Hot Extrusion ◽  
Secondary Phases ◽  
Zinc Alloys ◽  
Alloying Additions ◽  
Degradation Rates ◽  
Master Alloys ◽  
Melt Deposition

In this study, the effect of calcium (Ca) and erbium (Er) on the microstructure, mechanical properties, and corrosion behavior of magnesium-zinc alloys is reported. The alloys were prepared using disintegrated melt deposition (DMD) technique using the alloying additions as Zn, Ca, and Mg-Er master alloys and followed by hot extrusion. Results show that alloying addition of Er has significantly reduced the grain sizes of Mg-Zn alloys and also when compared to pure magnesium base material. It also has substantially enhanced both the tensile and the compressive properties by favoring the formation of MgZn2 type secondary phases that are uniformly distributed during hot-extrusion. The quaternary Mg-Zn-Ca-Er alloy exhibited the highest strength due to lower grain size and particle strengthening due to the influence of the rare earth addition Er. The observed elongation was a result of extensive twinning observed in the alloys. Also, the degradation rates have been substantially reduced as a result of alloying additions and it is attributed to the barrier effect caused by the secondary phases.

scholarly journals Enhancing Properties of Aerospace Alloy Elektron 21 Using Boron Carbide Nanoparticles as Reinforcement

2019 ◽  
Vol 9 (24) ◽  
pp. 5470
Author(s):  
Sravya Tekumalla ◽  
Ng Joo Yuan ◽  
Meysam Haghshenas ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Boron Carbide ◽  
Compressive Loading ◽  
Hot Extrusion ◽  
Microstructural Characterization ◽  
Thermal Insulating ◽  
Damping Characteristics ◽  
B4c Particles ◽  
Superior Mechanical Properties ◽  
Melt Deposition

In this study, the effect of nano-B4C addition on the property profile of Elektron 21 (E21) alloys is investigated. E21 reinforced with different amounts of nano-size B4C particulates was synthesized using the disintegrated melt deposition technique followed by hot extrusion. Microstructural characterization of the developed E21-B4C composites revealed refined grains with the progressive addition of boron carbide nanoparticles. The evaluation of mechanical properties indicated a significant improvement in the yield strength of the nanocomposites under compressive loading. Further, the E21-2.5B4C nanocomposites exhibited the best damping characteristics, highest young’s modulus, and highest resistance to ignition, thus featuring all the characteristics of a material suitable for several aircraft applications besides the currently allowed seat frames. The superior mechanical properties of the E21-B4C nanocomposites are attributed to the refined grain sizes, uniform distribution of the nanoparticles, and the thermal insulating effects of nano-B4C particles.

scholarly journals Mechanical Characterization of Graphene Nanoplatelets-Reinforced Mg-3Sn Alloy Synthesized by Powder Metallurgy

Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 62
Author(s):  
Pravir Kumar ◽  
Katerina Skotnicova ◽  
Ashis Mallick ◽  
Manoj Gupta ◽  
Tomas Cegan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Powder Metallurgy ◽  
Compressive Strain ◽  
Hot Extrusion ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
Microstructural Characteristics

The present study investigated the effects of alloying and nano-reinforcement on the mechanical properties (microhardness, tensile strength, and compressive strength) of Mg-based alloys and composites. Pure Mg, Mg-3Sn alloy, and Mg-3Sn + 0.2 GNP alloy-nanocomposite were synthesized by powder metallurgy followed by hot extrusion. The microstructural characteristics of the bulk extruded samples were explored using X-ray diffraction, field-emission scanning electron microscopy, and optical microscopy and their mechanical properties were compared. The microhardness, tensile strength, and compressive strength of the Mg-3Sn alloy improved when compared to those of monolithic Mg sample and further improvements were displayed by Mg-3Sn + 0.2 GNP alloy-nanocomposite. No significant change in the compressive strain to failure was observed in both the alloy and the alloy-nanocomposite with respect to that of the pure Mg sample. However, an enhanced tensile strain to failure was displayed by both the alloy and the alloy-nanocomposite.

Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum Contents

2009 ◽  
Vol 610-613 ◽  
pp. 801-805
Author(s):  
Xing Gang Li ◽  
Kui Zhang ◽  
Yong Jun Li ◽  
Xin Zhao ◽  
Xu Jun Mi
Keyword(s):  
Mechanical Properties ◽  
Magnesium Alloys ◽  
Annealing Treatment ◽  
Hot Extrusion ◽  
Hardness Measurement ◽  
Eutectic Phase ◽  
Magnesium Matrix ◽  
Homogenization Treatment ◽  
Zn Alloys ◽  
High Aluminum

The effect of Al contents on the properties and structures of AZ80, AZ91，AZ131 and AZ151 magnesium alloys has been studied. The experiments of homogenization treatment, hot extrusion, and annealing treatment are carried out in order to study the effects of these processes to the properties and structure of AZ80, AZ91, AZ131 and AZ151 magnesium alloys. The parameters of homogenization treatment (420°C×24h, 420°C×36h) determined by DSC and metallurgical photo are sufficient which ensure the eutectic phase melt into magnesium matrix greatly. The strength of extruded bars shortly after homogenization treatment increase (Rp0.2 from 232 to 310MPa), but elongation decrease (A from 12 to 2.5%) with Al contents. The differences and causes of structure and mechanical properties of extruded bar after the process of aging are analyzed in detail by tensile experiments, hardness measurement, and optical observation.

scholarly journals Mechanical Characterization of Graphene Nanoplatelets-Reinforced Mg-3Sn Alloy Synthesized by Powder Metallurgy

2020 ◽  
Author(s):  
Pravir Kumar ◽  
Katerina Skotnicova ◽  
Ashis Mallick ◽  
Manoj Gupta ◽  
Tomas Cegan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Powder Metallurgy ◽  
Compressive Strain ◽  
Hot Extrusion ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
Microstructural Characteristics

The present study investigated the effects of alloying and nano-reinforcement on the mechanical properties (microhardness, tensile strength, and compressive strength) of Mg-based alloys and composites. Pure Mg, Mg-3Sn alloy, and Mg-3Sn+0.2GNP alloy-nanocomposite were synthesized by powder metallurgy followed by hot extrusion. The microstructural characteristics of the bulk extruded samples were explored using X-ray diffraction, field-emission scanning electron microscopy, and optical microscopy and their mechanical properties were compared. The microhardness, tensile strength, and compressive strength of the Mg-3Sn alloy improved when compared to those of monolithic Mg sample and further improvements were displayed by Mg-3Sn+0.2GNP alloy-nanocomposite. No significant change in the compressive strain to failure was observed in both the alloy and the alloy-nanocomposite with respect to that of the pure Mg sample. However, an enhanced tensile strain to failure was displayed by both the alloy and the alloy-nanocomposite.

Enhancing Mechanical Properties of AZ31 Magnesium Alloy Through Simultaneous Addition of Aluminum and Nano-Al2O3

2010 ◽  
Author(s):  
S. Han ◽  
M. E. Alam ◽  
A. M. S. Hamouda ◽  
Q. B. Nguyen ◽  
M. Gupta
Keyword(s):  
Mechanical Properties ◽  
Coefficient Of Thermal Expansion ◽  
Hot Extrusion ◽  
Microstructural Characterization ◽  
Az31 Alloy ◽  
Deposition Technique ◽  
The Matrix ◽  
Characterization Studies ◽  
Melt Deposition ◽  
Work Of Fracture

In the present study, AZ31-Al2O3-Al magnesium nano-composites were successfully synthesized using an innovative disintegrated melt deposition technique followed by hot extrusion. Microstructural characterization studies revealed uniaxial grain size, reasonably uniform distribution of particulates/intermetallics in the matrix and minimal porosity. Physical properties characterization revealed that addition of both nano-Al2O3 and Al reduced the coefficient of thermal expansion (CTE) of monolithic AZ31. The presence of both Al2O3 particulates and aluminum also assisted in improving overall mechanical properties including microhardness, UTS, ductility and work of fracture of AZ31. The results suggest that these composites have significant potential in diverse engineering applications when compared to AZ31 alloy.

An investigation into the effect of ball milling of reinforcement on the enhanced mechanical response of magnesium

2011 ◽  
Vol 45 (24) ◽  
pp. 2483-2493 ◽  
Author(s):  
Meisam Kouhi Habibi ◽  
Khin Sandar Tun ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Mechanical Response ◽  
Failure Strain ◽  
Hot Extrusion ◽  
Microstructural Characterization ◽  
Microwave Assisted ◽  
The Matrix ◽  
Rapid Sintering ◽  
Powder Metallurgy Route ◽  
Magnesium Composites

Magnesium composites containing as-received and ball-milled (B) Al particles were synthesized through powder metallurgy route using microwave-assisted rapid sintering technique followed by hot extrusion. Microstructural characterization revealed fairly uniform distribution of both as-received and ball-milled (up to 1.626 vol.%) Al particles in the matrix and reduction in average matrix grain size. Compared to monolithic Mg, Mg/Al, and Mg/Al (B) composites exhibited significantly higher strengths and failure strains. The results revealed that strength and failure strain (up to 1.626 vol.% Al) of composites containing ball-milled Al particles remained higher compared to composites containing as-received Al particles. Compared to monolithic Mg, Mg/1.626Al (B) composite exhibited the best mechanical properties improvement with an increase of 78%, 79%, 87%, and 225%, in 0.2%YS, UTS, failure strain and WOF, respectively, while for Mg/1.626Al composite, the improvement was 51%, 53%, 65% and 142%, respectively. The effects of as-received and ball-milled Al particles contribution on the enhancement of mechanical properties of Mg is investigated in this article.

Sign in / Sign up

Export Citation Format

Share Document