The Shunbei crude oil pipeline is prepared to use the unheated transportation process to transport waxy crudes. However, the wax formation in the pipeline is unknown. In order to predict the wax deposition of the pipeline, the physical property experiment of Shunbei crude oil was carried out through field sampling. The density, freezing point, hydrocarbon composition, and viscosity–temperature characteristics of crude oil are obtained. The cloud point and wax precipitation characteristics of the crude oil were obtained using the differential scanning calorimetry (DSC) thermal analysis method. Then, the wax deposition rate of the pipeline was predicted by two methods: OLGA software and wax deposition kinetic model. Finally, the optimal pigging cycle of the pipeline was calculated on this basis. The results show that: Shunbei crude oil is a light crude oil with low wax content, a low freezing point, and a high cloud point. Comparing the OLGA simulation results with the calculation results of the Huang Qiyu model, the development trend of wax deposition along the pipeline was the same under different working conditions. The relative error of the maximum wax layer thickness was 6%, proving that it is feasible for OLGA to simulate wax deposition in long-distance crude oil pipelines. Affected by the wax precipitation characteristics of Shunbei crude oil, there was a peak of wax precipitation between the pipeline section where crude oil temperature was 9.31–13.31 °C and the recommended pigging cycle at the lowest throughput was 34 days in winter and 51 days in spring and autumn.
Role of Shearing Dispersion and Stripping in Wax Deposition in Crude Oil Pipelines
