Visual study of TiO2 nanofluid stabilization methods on inhibition of asphaltene precipitation in porous media

2021 ◽  
Vol 169 ◽  
pp. 106953
Author(s):  
Sahar Kafashi ◽  
Mohammad Reza Rasaei ◽  
Ehsan Eshraghi ◽  
Laura Kuhar ◽  
Andrej Bona ◽  
...  
Author(s):  
Fernancelys Rodriguez M.

Abstract Asphaltenes are complex hydrocarbon molecules that are in suspension in the oil, stabilized by resins, which may cause severe production issues at reservoir and surface conditions. High asphaltene and resin contents is one of the main characteristics of the Venezuelan unconventional oils (highly viscous oils) in the Orinoco Oil Belt. This high concentration of resins in the oil maintains the aggregates of asphaltenes dissolved in the continue oil phase avoiding asphaltene precipitation/ flocculation/deposition issues at field conditions as some Venezuelan conventional oil reservoirs located in northern Monagas State in which unfavorable resins/asphaltene (R/A) ratios promote the precipitation of asphaltenes. Conventional oil reservoirs in northern Monagas show gravitational segregation, this is the case of Carito-Mulata and Santa Barbara Field, varying from an upper zone of critical fluid behavior to a black oil zone in the lowest part of the structure in which the current pressure levels induce asphaltene precipitation, causing problems by plugging reservoirs, wells and pipelines, severely affecting oil and gas production. This causes increased production costs (chemical cleaning) and/or irreversible formation damage when reservoir pressures are less than asphaltene precipitation/flocculation onset pressures. Therefore it is necessary to characterize the asphaltene thermodynamic behavior and include this in reservoir numerical-simulation models, with the aim of increasing the reliability of the results and optimizing production strategies. Reproducing the thermodynamic behavior of asphaltenes is very complex, both experimentally and in numerical simulation, especially in terms of description and measurement of the degree of asphaltene-porous media interaction and the effect of injected fluids into the reservoir (EOR methods such as miscible/non-miscible gas injection or chemical flooding). Nevertheless, efforts have been done by the Venezuelan National Oil Company and collaborators, both at laboratory and simulation scales, to study the asphaltene thermodynamic behavior and the effect of permeability reduction in the porous media and its impact on the production profiles for complex Venezuelan reservoirs. This article presents a literature review of the Venezuelan experience for the characterization and modeling of asphaltenes for conventional and heavy oil reservoirs.


2019 ◽  
Author(s):  
Nasser Sabet ◽  
Mohammadjavad Mohammadi ◽  
Ali Zirahi ◽  
Mohsen Zirrahi ◽  
Hassan Hassanzadeh ◽  
...  

2020 ◽  
Vol 21 (1) ◽  
pp. 45-52
Author(s):  
Laith Warid Farhan ◽  
Faleh H. M. Almahdawi ◽  
Adel Sherif Hammadi

There are several oil reservoirs that had severe from a sudden or gradual decline in their production due to asphaltene precipitation inside these reservoirs. Asphaltene deposition inside oil reservoirs causes damage for permeability and skin factor, wettability alteration of a reservoir, greater drawdown pressure. These adverse changing lead to flow rate reduction, so the economic profit will drop. The aim of this study is using local solvents: reformate, heavy-naphtha and binary of them for dissolving precipitated asphaltene inside the oil reservoir. Three samples of the sand pack had been prepared and mixed with a certain amount of asphaltene. Permeability of these samples calculated before and after mixed with asphaltenes. Then, the permeability of samples calculated after solvents injection into that porous media. After that, all the values of samples permeability converted to average permeability damage compared with the pure samples. The results show the average permeability damage of samples that mixed with 20 gm was 24 %, but after reformate injected reduced to 14 %. After injected heavy naphtha to porous media, the average permeability reduced only to 17%. The binary solvent had been prepared from reformatted mixed with heavy naphtha gained the best results because it dropped the average permeability damage to 10%.


2011 ◽  
Vol 308 (1-2) ◽  
pp. 129-134 ◽  
Author(s):  
Ali Abedini ◽  
Siavash Ashoori ◽  
Farshid Torabi

Sign in / Sign up

Export Citation Format

Share Document