Petroleum waste as raw materials for production of electricity by Photogalvanic solar cell

In this work is done a study on the sintered microstructure of ceramic tile paste incorporated with petroleum waste. The raw materials used were kaolin, sodic feldspar, quartz and petroleum waste. The ceramic tiles containing up to 5 wt% petroleum waste were prepared by uniaxial pressing and sintered at 1200°C. The microstructural evolution was examined by SEM. In addition, water absorption, linear shrinkage, and sintered density were determined. The results showed that the microstructure of the ceramic tiles is influenced by the added petroleum waste.

Download Full-text

A mini review of recent strategies towards stable nano-structure perovskite solar cell fabrication

International Journal For Innovative Engineering and Management Research ◽

10.48047/ijiemr/v09/i12/82 ◽

2020 ◽

pp. 430-436

Keyword(s):

Solar Cell ◽

Raw Materials ◽

Scale Up ◽

Perovskite Solar Cells ◽

Perovskite Solar Cell ◽

Nano Structure ◽

Long Term Stability ◽

Solar Cell Fabrication ◽

Cell Fabrication ◽

The Stability

Organic-inorganic perovskite solar cells (PSC) are drawing interest towards photovoltaic device fabrications due to low raw materials cost, easy room temperature fabrications, and exhibiting excellent tunable optoelectronic properties. Power conversion efficiency increased dramatically in the last few years despite challenges like instability in moisture and high ambient temperature conditions. However, techniques employed like encapsulation used to reduce perovskite degradation rate, long-term stability still an issue for commercial scale-up. Most of the perovskite materials, more precisely halide perovskites, are affected by the ambient humid conditions. In this present study, we explore the recent development of different strategies to fabricate moisture-resistant stable perovskite solar cell fabrication. This review discusses the structural influence on the stability of PSC.

Download Full-text

Life Cycle Assessment and Eco-Design of a Wireless TV/VCR Remote

Volume 2A: 33rd Computers and Information in Engineering Conference ◽

10.1115/detc2013-12484 ◽

2013 ◽

Author(s):

Yang Hu ◽

Gaurav Ameta

Keyword(s):

Life Cycle Assessment ◽

Life Cycle ◽

Solar Cell ◽

Environmental Impacts ◽

Waste Treatment ◽

Raw Materials ◽

The United States ◽

Raw Material ◽

Alkaline Batteries ◽

Improve Product

The focus of this paper is to present life-cycle assessment (LCA) of a TV/VCR remote, including alkaline batteries, and to compare the environmental impacts with a redesigned remote consisting of a solar cell. LCA is a very helpful tool in identifying the most important factors for improving product sustainability. The remote considered in this study can control both television and video cassette recorder. This remote is manufactured in Malaysia and exported to the United States. Its life-cycle system includes raw material, parts, shipment, use phase and waste treatment; its life-cycle impact assessment (LCIA) is performed using SimaPro 7.1 and employing the TRACI method. LCA uncertainty analyzing is performed for both remotes utilizing Monte Carlo simulation in SimaPro 7.1. LCA result shows use of alkaline battery affects most obviously in environmental impacts. In Eco-design remote model, both energy type and raw materials changed. Environmental impacts reduce in five categories in redesigned remote. This paper: 1) presents a prototype design for product using solar cell; 2) presents a novel method for designers to determine raw materials to improve product sustainability in designing stage; 3) provides suggestions for manufacturers to improve product sustainability through reuse of solar cell or a leasing strategy.

Download Full-text

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100104972 ◽

1988 ◽

Vol 46 ◽

pp. 582-583

Author(s):

C. J. Chan ◽

K. R. Venkatachari ◽

W. M. Kriven ◽

J. F. Young

Keyword(s):

Particle Size ◽

Raw Materials ◽

Shape Change ◽

Microstructural Characterization ◽

Particle Size Effect ◽

Dicalcium Silicate ◽

Laser Melting ◽

Uniform Size ◽

Cell Shape Change ◽

Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Download Full-text

Crystallization of barium hexaferrite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100122216 ◽

1992 ◽

Vol 50 (1) ◽

pp. 362-363

Author(s):

Chung-kook Lee ◽

Yolande Berta ◽

Robert F. Speyer

Keyword(s):

Size Distribution ◽

Raw Materials ◽

Barium Hexaferrite ◽

Recording Media ◽

Magnetic Recording Media ◽

Promising Candidate ◽

Crystallization Method ◽

Temperature Heat ◽

High Density Magnetic Recording ◽

Temperature Heat Treatment

Barium hexaferrite (BaFe12O19) is a promising candidate for high density magnetic recording media due to its superior magnetic properties. For particulate recording media, nano-sized single crystalline powders with a narrow size distribution are a primary application requirement. The glass-crystallization method is preferred because of the controllability of crystallization kinetics, hence, particle size and size distribution. A disadvantage of this method is the need to melt raw materials at high temperatures with non-reactive crucibles, e.g. platinum. However, in this work, we have shown that crystal growth of barium hexaferrite occurred during low temperature heat treatment of raw batches.

Download Full-text