Development of extraordinary high-strength-toughness Mg alloy via combined processes of repeated plastic working and hot extrusion

2013 ◽  
Vol 573 ◽  
pp. 127-131 ◽  
Author(s):  
Ke Liu ◽  
Xudong Wang ◽  
Wenbo Du
Keyword(s):  
Hot Extrusion ◽  
High Strength ◽  
Mg Alloy ◽  
Combined Processes ◽  
Plastic Working

scholarly journals The Production of Material with Ultrafine Grain Structure in Al-Zn Alloy in the Process of Rapid Solidification

2014 ◽  
Vol 14 (2) ◽  
pp. 57-62
Author(s):  
M. Szymaneka ◽  
B. Augustyn ◽  
D. Kapinos ◽  
S. Boczkal ◽  
J. Nowak
Keyword(s):  
Rapid Solidification ◽  
Melt Spinning ◽  
Hot Extrusion ◽  
High Strength ◽  
Strength Properties ◽  
Grain Structure ◽  
Ultrafine Grain ◽  
Plastic Working ◽  
Metal Treatment ◽  
Ultrafine Grain Structure

Abstract In the aluminium alloy family, Al-Zn materials with non-standard chemical composition containing Mg and Cu are a new group of alloys, mainly owing to their high strength properties. Proper choice of alloying elements, and of the method of molten metal treatment and casting enable further shaping of the properties. One of the modern methods to produce materials with submicron structure is a method of Rapid Solidification. The ribbon cast in a melt spinning device is an intermediate product for further plastic working. Using the technique of Rapid Solidification it is not possible to directly produce a solid structural material of the required shape and length. Therefore, the ribbon of an ultrafine grain or nanometric structure must be subjected to the operations of fragmentation, compaction, consolidation and hot extrusion. In this article the authors focussed their attention on the technological aspect of the above mentioned process and described successive stages of the fabrication of an AlZn9Mg2.5Cu1.8 alloy of ultrafine grain structure designated for further plastic working, which enables making extruded rods or elements shaped by the die forging technology. Studies described in the article were performed under variable parameters determined experimentally in the course of the alloy manufacturing process, including casting by RS and subsequent fragmentation.

scholarly journals On Direct Hot Extrusion Characteristics of High Strength Al-5 mass%Mg Alloy Billet Coated with Pure Aluminium

1984 ◽  
Vol 48 (8) ◽  
pp. 813-822 ◽  
Author(s):  
Kenji Matsuki ◽  
Mitsugu Tokizawa ◽  
Norio Takatsuji ◽  
Kazuo Murotani
Keyword(s):  
Hot Extrusion ◽  
High Strength ◽  
Mg Alloy ◽  
Pure Aluminium

scholarly journals Effects of Sc and Zr on the Texture and Mechanical Anisotropy of High Strength Al–Zn–Mg Alloy Sheets

2016 ◽  
Vol 48 (1) ◽  
pp. 39-48 ◽  
Author(s):  
Y. Deng ◽  
Z. M. Yin ◽  
G. F. Xu ◽  
Y. J. Wang ◽  
L. Y. Lu ◽  
...  
Keyword(s):  
High Strength ◽  
Mechanical Anisotropy ◽  
Mg Alloy

Improving the Mechanical Properties of AZ31 Mg Alloy by High Ratio Extrusion

2006 ◽  
Vol 503-504 ◽  
pp. 865-870 ◽  
Author(s):  
Yongjun Chen ◽  
Qu Dong Wang ◽  
Jianguo Peng ◽  
Chun Quan Zhai
Keyword(s):  
Mechanical Properties ◽  
High Strength ◽  
High Ratio ◽  
Extrusion Ratio ◽  
Mg Alloy ◽  
Fine Grained ◽  
Az31 Mg Alloy ◽  
Industry Applications ◽  
One Step ◽  
The One

Experiments were conducted both to evaluate the potential for grain refinement, the subsequent mechanical properties at room temperature in samples of AZ31 Mg alloy and also to investigate the relationship between one-step and two-step high ratio extrusion (HRE). The one-step HRE was undertaken using a high extrusion ratio of 70:1 at 250, 300 and 350°C. And the two-step HRE was conducted with an extrusion ratio of 7 for the first step at 250, 300 and 350°C, followed by a second-step extrusion with an extrusion ratio of 10 at 250, 300 and 350°C. The initial grain size in the AZ31 ingot was 100μm and that after one-step HRE became similar to 5μm, after two-step HRE at 250, 300 and 350°C were 2, 4, 7μm, respectively, resulting in superior mechanical properties at ambient temperature. The microstructure of two-step HRE was finer and uniformer than that of one-step HRE and the strength of one-step and two-step HRE were similar, moreover, the elongation of one-step HRE was improved markedly than that of two-step HRE. Dynamic recrystallization and adjacent grain broking during HRE is introduced to explain the effects of one-step and two-step HRE on the microstructure and mechanical properties of AZ31 Mg alloy. The current results imply that the simple HRE method might be a feasible processing method for industry applications, and the multiply steps extrusion are effective to fabricate high strength of fine grained hcp metals.

scholarly journals Less is More: Oligomer extraction and hydrothermal annealing increase PDMS bonding forces for new microfluidics assembly and for biological studies

2017 ◽  
Author(s):  
L. J. Millet ◽  
A. Jain ◽  
M. U. Gillette
Keyword(s):  
Network Formation ◽  
Low Cost ◽  
Covalent Bond ◽  
High Strength ◽  
Combined Processes ◽  
Less Is More ◽  
Cell Network ◽  
Biological Studies ◽  
Clinical Biology ◽  
Network Studies

Key determinants in the emergence of complex cellular morphologies and functions are cues in the micro-environment. Primary among these is the presence of neighboring cells as networks form. Therefore, for high-resolution analysis, it is crucial to develop micro-environments that permit exquisite control of network formation. This is especially true in cell science, tissue engineering, and clinical biology. We introduce a new approach for assembling polydimethylsiloxane (PDMS)-based microfluidic environments that enhances cell network formation and analyses. We report that the combined processes of PDMS solvent-extraction (E-PDMS) and hydrothermal annealing create unique conditions that produce high-strength bonds between E-PDMS and glass – properties not associated with conventional PDMS. Extraction followed by hydrothermal annealing removes unbound oligomers, promotes polymer cross-linking, facilitates covalent bond formation with glass, and retains the highest biocompatibility. Our extraction protocol accelerates oligomer removal from 5 to 2 days. Resulting microfluidic platforms are uniquely suited for cell-network studies owing to high bond strengths, effectively corralling cellular extensions and eliminating harmful oligomers. We demonstrate simple, simultaneous actuation of multiple microfluidic domains for invoking ATP- and glutamate-induced Ca2+ signaling in glial-cell networks. These low-cost, simple E-PMDS modifications and flow manipulations further enable microfluidic technologies for cell-signaling and network studies as well as novel applications.

scholarly journals Evaluation of Structure and Corrosion Behavior of FeAl Alloy after Crystallization, Hot Extrusion and Hot Rolling

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2041
Author(s):  
Janusz Cebulski ◽  
Dorota Pasek ◽  
Bartosz Chmiela ◽  
Magdalena Popczyk ◽  
Andrzej Szymon Swinarew ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Hot Rolling ◽  
Cast Alloy ◽  
Rolling Direction ◽  
Extrusion Direction ◽  
Electrochemical Corrosion ◽  
Hot Extrusion ◽  
Corrosion Current ◽  
Plastic Working ◽  
Ingot Axis

The paper presents the results of tests on the corrosion resistance of Fe40Al5Cr0.2TiB alloy after casting, plastic working using extrusion and rolling methods. Examination of the microstructure of the Fe40Al5Cr0.2TiB alloy after casting and after plastic working was performed on an Olympus GX51 light microscope. The stereological relationships of the alloy microstructure in the state after crystallization and after plastic working were determined. The quantitative analysis of the structure was conducted after testing with the EBSD INCA HKL detector and the Nordlys II analysis system (Channel 5), which was equipped with the Hitachi S-3400N microscope. Structure tests and corrosion tests were performed on tests cut perpendicular to the ingot axis, extrusion direction, and rolling direction. As a result of the tests, it was found that the crystallized alloy has better corrosion resistance than plastically processed material. Plastic working increases the intensity of the electrochemical corrosion of the examined alloy. It was found that as-cast alloy is the most resistant to corrosion in a 5% NaCl compared with the alloys after hot extrusion and after hot rolling. The parameters in this study show the smallest value of the corrosion current density and corrosion rate as well as the more positive value of corrosion potential.

Comparative Study on TiH2 and CaCO3 for Fabrication of Mg Alloy Foams

2008 ◽  
Vol 569 ◽  
pp. 273-276 ◽  
Author(s):  
Chang Hwan Seo ◽  
M. J. Jeong ◽  
In Young Jung ◽  
Bo Young Hur
Keyword(s):  
Metal Foam ◽  
High Strength ◽  
Cost Effective ◽  
Decomposition Temperature ◽  
Mg Alloy ◽  
New Materials ◽  
Alloying Element ◽  
Blowing Agent ◽  
Economic View ◽  
Cost Effective Method

Aluminum alloy foams, new materials belonging to a special class of porous materials, have been prepared using melt foaming method. Silicon was chosen alloying element due to its low density, high strength, effective casting and reduced shrinkage. Melt foaming method is cost-effective method to fabricate metal foam. Usually, TiH2 is applied to blowing agent, but its cost is high. CaCO3 is one of candidates to substitute TiH2 in the economic view-point. For the comparison of formability, Mg alloy foams were prepared by TiH2 and CaCO3. However, the decomposition temperature of CaCO3 is higher than that of TiH2. This paper will be discussed on the possible usage of CaCO3 in the Al melt.

Sign in / Sign up

Export Citation Format

Share Document