Observance of enhanced specific capacity in quenched Cr doped CuFeO2

2022 ◽  
Vol 139 ◽  
pp. 106372
Author(s):  
Manickam Ramesh ◽  
Thangaian Kesavan ◽  
Krishnendu Biswas
Keyword(s):  
Specific Capacity

scholarly journals Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2468
Author(s):  
Hui Zhan ◽  
Mengjun Wu ◽  
Rui Wang ◽  
Shuohao Wu ◽  
Hao Li ◽  
...  
Keyword(s):  
Polymer Electrolytes ◽  
Specific Capacity ◽  
Sio2 Nanoparticles ◽  
Inorganic Materials ◽  
Solid Polymer Electrolytes ◽  
Lithium Metal ◽  
Composite Polymer ◽  
Composite Electrolyte ◽  
Composite Polymer Electrolytes ◽  
Lithium Metal Batteries

Composite polymer electrolytes (CPEs) incorporate the advantages of solid polymer electrolytes (SPEs) and inorganic solid electrolytes (ISEs), which have shown huge potential in the application of safe lithium-metal batteries (LMBs). Effectively avoiding the agglomeration of inorganic fillers in the polymer matrix during the organic–inorganic mixing process is very important for the properties of the composite electrolyte. Herein, a partial cross-linked PEO-based CPE was prepared by porous vinyl-functionalized silicon (p-V-SiO2) nanoparticles as fillers and poly (ethylene glycol diacrylate) (PEGDA) as cross-linkers. By combining the mechanical rigidity of ceramic fillers and the flexibility of PEO, the as-made electrolyte membranes had excellent mechanical properties. The big special surface area and pore volume of nanoparticles inhibited PEO recrystallization and promoted the dissolution of lithium salt. Chemical bonding improved the interfacial compatibility between organic and inorganic materials and facilitated the homogenization of lithium-ion flow. As a result, the symmetric Li|CPE|Li cells could operate stably over 450 h without a short circuit. All solid Li|LiFePO4 batteries were constructed with this composite electrolyte and showed excellent rate and cycling performances. The first discharge-specific capacity of the assembled battery was 155.1 mA h g−1, and the capacity retention was 91% after operating for 300 cycles at 0.5 C. These results demonstrated that the chemical grafting of porous inorganic materials and cross-linking polymerization can greatly improve the properties of CPEs.

scholarly journals PEDOT-Coated Red Phosphorus Nanosphere Anodes for Pseudocapacitive Potassium-Ion Storage

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1732
Author(s):  
Dan Zhao ◽  
Qian Zhao ◽  
Zhenyu Wang ◽  
Lan Feng ◽  
Jinying Zhang ◽  
...  
Keyword(s):  
Surface Engineering ◽  
Electronic Conductivity ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Average Diameter ◽  
Potassium Ion ◽  
Red Phosphorus ◽  
Fast Charging ◽  
Potential Alternative ◽  
High Theoretical Capacity

Potassium-ion batteries (KIBs) have come up as a potential alternative to lithium-ion batteries due to abundant potassium storage in the crust. Red phosphorus is a promising anode material for KIBs with abundant resources and high theoretical capacity. Nevertheless, large volume expansion, low electronic conductivity, and limited K+ charging speed in red phosphorus upon cycling have severely hindered the development of red phosphorus-based anodes. To obtain improved conductivity and structural stability, surface engineering of red phosphorus is required. Poly(3,4-ethylenedioxythiophene) (PEDOT)-coated red phosphorus nanospheres (RPNP@PEDOT) with an average diameter of 60 nm were synthesized via a facile solution-phase approach. PEDOT can relieve the volume change of red phosphorus and promote electron/ion transportation during charge−discharge cycles, which is partially corroborated by our DFT calculations. A specific capacity of 402 mAh g−1 at 0.1 A g−1 after 40 cycles, and a specific capacity of 302 mAh g−1 at 0.5 A g−1 after 275 cycles, were achieved by RPNP@PEDOT anode with a high pseudocapacitive contribution of 62%. The surface–interface engineering for the organic–inorganic composite of RPNP@PEDOT provides a novel perspective for broad applications of red phosphorus-based KIBs in fast charging occasions.

scholarly journals Efficient Catalytic Conversion of Polysulfides by Biomimetic Design of “Branch-Leaf” Electrode for High-Energy Sodium–Sulfur Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Wenyan Du ◽  
Kangqi Shen ◽  
Yuruo Qi ◽  
Wei Gao ◽  
Mengli Tao ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Electrochemical Reaction ◽  
Molecular Layer ◽  
Specific Capacity ◽  
High Energy ◽  
Reduction Reaction ◽  
Biomimetic Design ◽  
Co Nanoparticles ◽  
Sodium Sulfur

AbstractRechargeable room temperature sodium–sulfur (RT Na–S) batteries are seriously limited by low sulfur utilization and sluggish electrochemical reaction activity of polysulfide intermediates. Herein, a 3D “branch-leaf” biomimetic design proposed for high performance Na–S batteries, where the leaves constructed from Co nanoparticles on carbon nanofibers (CNF) are fully to expose the active sites of Co. The CNF network acts as conductive “branches” to ensure adequate electron and electrolyte supply for the Co leaves. As an effective electrocatalytic battery system, the 3D “branch-leaf” conductive network with abundant active sites and voids can effectively trap polysulfides and provide plentiful electron/ions pathways for electrochemical reaction. DFT calculation reveals that the Co nanoparticles can induce the formation of a unique Co–S–Na molecular layer on the Co surface, which can enable a fast reduction reaction of the polysulfides. Therefore, the prepared “branch-leaf” CNF-L@Co/S electrode exhibits a high initial specific capacity of 1201 mAh g−1 at 0.1 C and superior rate performance.

scholarly journals Controlled Nanostructuration of Cobalt Oxyhydroxide Electrode Material for Hybrid Supercapacitors

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2325
Author(s):  
Ronan Invernizzi ◽  
Liliane Guerlou-Demourgues ◽  
François Weill ◽  
Alexia Lemoine ◽  
Marie-Anne Dourges ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Energy Storage ◽  
Specific Surface ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Hybrid Supercapacitors ◽  
Cobalt Oxyhydroxide ◽  
Precipitation Medium ◽  
The Impact

Nanostructuration is one of the most promising strategies to develop performant electrode materials for energy storage devices, such as hybrid supercapacitors. In this work, we studied the influence of precipitation medium and the use of a series of 1-alkyl-3-methylimidazolium bromide ionic liquids for the nanostructuration of β(III) cobalt oxyhydroxides. Then, the effect of the nanostructuration and the impact of the different ionic liquids used during synthesis were investigated in terms of energy storage performances. First, we demonstrated that forward precipitation, in a cobalt-rich medium, leads to smaller particles with higher specific surface areas (SSA) and an enhanced mesoporosity. Introduction of ionic liquids (ILs) in the precipitation medium further strongly increased the specific surface area and the mesoporosity to achieve well-nanostructured materials with a very high SSA of 265 m2/g and porosity of 0.43 cm3/g. Additionally, we showed that ILs used as surfactant and template also functionalize the nanomaterial surface, leading to a beneficial synergy between the highly ionic conductive IL and the cobalt oxyhydroxide, which lowers the resistance charge transfer and improves the specific capacity. The nature of the ionic liquid had an important influence on the final electrochemical properties and the best performances were reached with the ionic liquid containing the longest alkyl chain.

The Coralloid-carbon Material Based on Biomass as Promising Anode Material for Lithium and Sodium Storage

2021 ◽  
Author(s):  
Ziqiang Yu ◽  
Zhiqiang Zhao ◽  
Tingyue Peng
Keyword(s):  
Lithium Ion Battery ◽  
Anode Material ◽  
Carbon Material ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Specific Capacity ◽  
Further Development ◽  
Sodium Storage ◽  
Cycling Life

Lithium ion battery (LIB), advantageous in high specific capacity, long cycling life and eco-friendly, has been widely used in many fields. The dwindling reserves, however, limit the further development. Sharing...

scholarly journals Binary PMMA/PVDF blend film modified substrate enables superior lithium metal anode for lithium batteries

2021 ◽  
Author(s):  
Yuping Wu ◽  
Xiaosong Xiong ◽  
Ruoyu Zhi ◽  
Qi Zhou ◽  
Wenqi Yan ◽  
...  
Keyword(s):  
Electrode Material ◽  
Lithium Batteries ◽  
Specific Capacity ◽  
Lithium Metal ◽  
Next Generation ◽  
Safety Hazards ◽  
Blend Film ◽  
Metal Anode ◽  
Lithium Metal Anode ◽  
Metallic Lithium

Metallic lithium is an promising next generation electrode material due to its ultrahigh specific capacity and the lowest potential. However, short cycling lifespan and safety hazards have hindered the practical...

scholarly journals Advances in the Applications of Graphene-Based Nanocomposites in Clean Energy Materials

Crystals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 47
Author(s):  
Yiqiu Xiang ◽  
Ling Xin ◽  
Jiwei Hu ◽  
Caifang Li ◽  
Jimei Qi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Fuel Cells ◽  
Lithium Ion Batteries ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Clean Energy ◽  
Proton Exchange ◽  
Energy Storage And Conversion ◽  
Thermoelectric Conversion

Extensive use of fossil fuels can lead to energy depletion and serious environmental pollution. Therefore, it is necessary to solve these problems by developing clean energy. Graphene materials own the advantages of high electrocatalytic activity, high conductivity, excellent mechanical strength, strong flexibility, large specific surface area and light weight, thus giving the potential to store electric charge, ions or hydrogen. Graphene-based nanocomposites have become new research hotspots in the field of energy storage and conversion, such as in fuel cells, lithium-ion batteries, solar cells and thermoelectric conversion. Graphene as a catalyst carrier of hydrogen fuel cells has been further modified to obtain higher and more uniform metal dispersion, hence improving the electrocatalyst activity. Moreover, it can complement the network of electroactive materials to buffer the change of electrode volume and prevent the breakage and aggregation of electrode materials, and graphene oxide is also used as a cheap and sustainable proton exchange membrane. In lithium-ion batteries, substituting heteroatoms for carbon atoms in graphene composite electrodes can produce defects on the graphitized surface which have a good reversible specific capacity and increased energy and power densities. In solar cells, the performance of the interface and junction is enhanced by using a few layers of graphene-based composites and more electron-hole pairs are collected; therefore, the conversion efficiency is increased. Graphene has a high Seebeck coefficient, and therefore, it is a potential thermoelectric material. In this paper, we review the latest progress in the synthesis, characterization, evaluation and properties of graphene-based composites and their practical applications in fuel cells, lithium-ion batteries, solar cells and thermoelectric conversion.

scholarly journals Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Quan Zong ◽  
Wei Du ◽  
Chaofeng Liu ◽  
Hui Yang ◽  
Qilong Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Interlayer Spacing ◽  
Zinc Ion ◽  
Carbon Cloth ◽  
High Specific Capacity ◽  
Irreversible Reaction ◽  
Ammonium Vanadate ◽  
Structure Degradation

AbstractAmmonium vanadate with bronze structure (NH4V4O10) is a promising cathode material for zinc-ion batteries due to its high specific capacity and low cost. However, the extraction of $${\text{NH}}_{{4}}^{ + }$$ NH 4 + at a high voltage during charge/discharge processes leads to irreversible reaction and structure degradation. In this work, partial $${\text{NH}}_{{4}}^{ + }$$ NH 4 + ions were pre-removed from NH4V4O10 through heat treatment; NH4V4O10 nanosheets were directly grown on carbon cloth through hydrothermal method. Deficient NH4V4O10 (denoted as NVO), with enlarged interlayer spacing, facilitated fast zinc ions transport and high storage capacity and ensured the highly reversible electrochemical reaction and the good stability of layered structure. The NVO nanosheets delivered a high specific capacity of 457 mAh g−1 at a current density of 100 mA g−1 and a capacity retention of 81% over 1000 cycles at 2 A g−1. The initial Coulombic efficiency of NVO could reach up to 97% compared to 85% of NH4V4O10 and maintain almost 100% during cycling, indicating the high reaction reversibility in NVO electrode.

scholarly journals Confine sulfur in double-hollow carbon sphere integrated with carbon nanotubes for advanced lithium–sulfur batteries

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Maru Dessie Walle ◽  
You-Nian Liu
Keyword(s):  
Carbon Nanotubes ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Carbon Sphere ◽  
Hollow Carbon Sphere ◽  
Lithium Sulfur Batteries ◽  
Hollow Carbon ◽  
Lithium Sulfur

AbstractThe lithium–sulfur (Li–S) batteries are promising because of the high energy density, low cost, and natural abundance of sulfur material. Li–S batteries have suffered from severe capacity fading and poor cyclability, resulting in low sulfur utilization. Herein, S-DHCS/CNTs are synthesized by integration of a double-hollow carbon sphere (DHCS) with carbon nanotubes (CNTs), and the addition of sulfur in DHCS by melt impregnations. The proposed S-DHCS/CNTs can effectively confine sulfur and physically suppress the diffusion of polysulfides within the double-hollow structures. CNTs act as a conductive agent. S-DHCS/CNTs maintain the volume variations and accommodate high sulfur content 73 wt%. The designed S-DHCS/CNTs electrode with high sulfur loading (3.3 mg cm−2) and high areal capacity (5.6 mAh mg cm−2) shows a high initial specific capacity of 1709 mAh g−1 and maintains a reversible capacity of 730 mAh g−1 after 48 cycles at 0.2 C with high coulombic efficiency (100%). This work offers a fascinating strategy to design carbon-based material for high-performance lithium–sulfur batteries.

Sign in / Sign up

Export Citation Format

Share Document