scholarly journals On the variety and formation sequence of second-phase particles in nickel-based superalloys fabricated by laser powder bed fusion

Materialia ◽  
2021 ◽  
Vol 15 ◽  
pp. 101037
Author(s):  
A. Després ◽  
C. Mayer ◽  
M. Veron ◽  
E.F. Rauch ◽  
M. Bugnet ◽  
...  
Keyword(s):  
Second Phase ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Second Phase Particles

Microstructure of In738Lc Fabricated Using Laser Powder Bed Fusion Additive Manufacturing

2021 ◽  
pp. 1-19
Author(s):  
Nandana Menon ◽  
Tanjheel Hasan Mahdi ◽  
Amrita Basak
Keyword(s):  
Additive Manufacturing ◽  
Electron Backscatter Diffraction ◽  
Small Scale ◽  
Second Phase ◽  
Face Centered Cubic ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Nickel Base Superalloys ◽  
Nickel Base

Abstract Nickel-base superalloys are extensively used in the production of gas turbine hot-section components as they offer exceptional creep strength and superior fatigue resistance at high temperatures. Such improved properties are due to the presence of precipitate-strengthening phases such as Ni3Ti or Ni3Al (gγ phases) in the normally face-centered cubic (FCC) structure of the solidified nickel. Although this second phase is the main reason for the improvements in properties, the presence of such phases also results in increased processing difficulties as these alloys are prone to crack formation. In this work, specimens of IN738LC are fabricated on a Coherent Creator laser powder bed fusion (L-PBF) additive manufacturing (AM) equipment. Optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and X-Ray diffraction (XRD) are carried out to characterize the deposit region. Metallurgical continuity is achieved in the entire deposit region and the specimens do not show any warpage. However, the specimens show voids (e.g., pores and cracks) in the deposit region. The results show that the percentage void area decreases along the build height direction. The deposited IN738LC shows polycrystalline grains in the entire deposit region as confirmed by XRD and EBSD. The grain size also shows variations along the build direction. In summary, the results open opportunities for academic researchers and small scale businesses in fabricating high-gγ nickel-base superalloys on a desktop laser powder bed fusion AM equipment

Microstructure of IN738LC Fabricated Using Laser Powder Bed Fusion Additive Manufacturing

2021 ◽  
Author(s):  
Nandana Menon ◽  
Tanjheel Hassan Mahdi ◽  
Amrita Basak
Keyword(s):  
Additive Manufacturing ◽  
Electron Backscatter Diffraction ◽  
Small Scale ◽  
Second Phase ◽  
Face Centered Cubic ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Nickel Base Superalloys ◽  
Nickel Base

Abstract Nickel-base superalloys are extensively used in the production of gas turbine hot-section components as they offer exceptional creep strength and superior fatigue resistance at high temperatures. Such improved properties are due to the presence of precipitate-strengthening phases such as Ni3Ti or Ni3Al (γ′ phases) in the normally face-centered cubic (FCC) structure of the solidified nickel. Although this second phase is the main reason for the improvements in properties, the presence of such phases also results in increased processing difficulties as these alloys are prone to crack formation. In this work, specimens of IN738LC are fabricated on a Coherent Creator laser powder bed fusion (L-PBF) additive manufacturing (AM) equipment. Optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and X-Ray diffraction (XRD) are carried out to characterize the deposit region. Metallurgical continuity is achieved in the entire deposit region and the specimens do not show any warpage. However, the specimens show voids (e.g., pores and cracks) in the deposit region. The results show that the percentage void area decreases along the build height direction. The deposited IN738LC shows polycrystalline grains in the entire deposit region as confirmed by XRD and EBSD. The grain size also shows variations along the build direction. In summary, the results open opportunities for academic researchers and small-scale businesses in fabricating high-γ′ nickel-base superalloys on a desktop laser powder bed fusion AM equipment.

Near-Threshold Fatigue Crack Growth Rates of Laser Powder Bed Fusion Produced Ti-6Al-4V

2020 ◽  
Author(s):  
Thorsten Hermann Becker ◽  
Nur Mohamed Dhansay ◽  
Gerrit Matthys Ter Haar ◽  
Kim Vanmeensel
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Growth Rates ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Crack Growth Rates ◽  
Near Threshold

scholarly journals On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 538 ◽  
Author(s):  
Fabrizia Caiazzo ◽  
Vittorio Alfieri ◽  
Giuseppe Casalino
Keyword(s):  
Surface Roughness ◽  
Energy Density ◽  
Process Parameters ◽  
Vickers Hardness ◽  
Powder Bed Fusion ◽  
Processing Conditions ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Fractional Density ◽  
Experimental Variation

Laser powder bed fusion (LPBF) can fabricate products with tailored mechanical and surface properties. In fact, surface texture, roughness, pore size, the resulting fractional density, and microhardness highly depend on the processing conditions, which are very difficult to deal with. Therefore, this paper aims at investigating the relevance of the volumetric energy density (VED) that is a concise index of some governing factors with a potential operational use. This paper proves the fact that the observed experimental variation in the surface roughness, number and size of pores, the fractional density, and Vickers hardness can be explained in terms of VED that can help the investigator in dealing with several process parameters at once.

Heat source model calibration for thermal analysis of laser powder-bed fusion

2020 ◽  
Vol 106 (7-8) ◽  
pp. 3367-3379 ◽  
Author(s):  
Shahriar Imani Shahabad ◽  
Zhidong Zhang ◽  
Ali Keshavarzkermani ◽  
Usman Ali ◽  
Yahya Mahmoodkhani ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Heat Source ◽  
Model Calibration ◽  
Source Model ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Heat Source Model ◽  
Powder Bed
Sign in / Sign up

Export Citation Format

Share Document