Freestanding Silicon Nanowires Mesh for Efficient Electricity Generation from Evaporation-Induced Water Capillary Flow

Metal-assisted chemical etching (MACE) is applied for fabrication of silicon nanowires (SiNWs). We have shown the effect of amorphous sheath of SiNWs by treating the nanowires with SF6 and the resulting reduction of absorption bandwidth, i.e. making SiNWs semi-transparent in near-infrared (IR). For the first time, by treating the fabricated SiNWs with copper containing HF∕H2O2∕H2O solution, we have generated crystalline nanowires with broader light absorption spectrum, up to λ = 1 μm. Both the absorption and photo-luminescence (PL) of the SiNWs are observed from visible to IR wavelengths. It is found that the SiNWs have PL at visible and near Infrared wavelengths, which may infer presence of mechanisms such as forbidden gap transitions other can involvement of plasmonic resonances. Non-radiative recombination of excitons is one of the reasons behind absorption of SiNWs. Also, on the dielectric metal interface, the absorption mechanism can be due to plasmonic dissipation or plasmon-assisted generation of excitons in the indirect band-gap material. Comparison between nanowires with and without metallic nanoparticles has revealed the effect of nanoparticles on absorption enhancement. The broader near IR absorption, paves the way for applications like hyperthermia of cancer while the optical transition in near IR also facilitates harvesting electromagnetic energy at a broad spectrum from visible to IR.

Download Full-text

Feasible design for electricity generation from Chlorella vulgaris using convenient photosynthetic conditions

BIOCELL ◽

10.32604/biocell.2018.07002 ◽

2018 ◽

Vol 42 (1) ◽

pp. 7-11 ◽

Cited By ~ 1

Author(s):

M. Moustafa ◽

T. Taha ◽

M. Elnouby ◽

M.A. Abu-Saied Aied ◽

A. Shati ◽

...

Keyword(s):

Chlorella Vulgaris ◽

Electricity Generation

Download Full-text

A Review on Utilization of Fly- Ash and Pond-Ash as a Partial Replacement of Cement in Concrete Mix Design

International Journal of Scientific Research in Science Engineering and Technology ◽

10.32628/ijsrset196270 ◽

2018 ◽

pp. 413-418

Author(s):

Harshkumar Patel ◽

Yogesh Patel

Keyword(s):

Fly Ash ◽

Electricity Generation ◽

Power Plants ◽

Renewable Energy Sources ◽

Thermal Power ◽

Strength Test ◽

Partial Replacement ◽

Pond Ash ◽

Research Activities ◽

Ash Disposal

Now-a-days energy planners are aiming to increase the use of renewable energy sources and nuclear to meet the electricity generation. But till now coal-based power plants are the major source of electricity generation. Disadvantages of coal-based thermal power plants is disposal problem of fly ash and pond ash. It was earlier considered as a total waste and environmental hazard thus its use was limited, but now its useful properties have been known as raw material for various application in construction field. Fly ash from the thermal plants is available in large quantities in fine and coarse form. Fine fly ash is used in construction industry in some amount and coarse fly ash is subsequently disposed over land in slurry forms. In India around 180 MT fly is produced and only around 45% of that is being utilized in different sectors. Balance fly ash is being disposed over land. It needs one acre of land for ash disposal to produce 1MW electricity from coal. Fly ash and pond ash utilization helps to reduce the consumption of natural resources. The fly ash became available in coal based thermal power station in the year 1930 in USA. For its gainful utilization, scientist started research activities and in the year 1937, R.E. Davis and his associates at university of California published research details on use of fly ash in cement concrete. This research had laid foundation for its specification, testing & usages. This study reports the potential use of pond-ash and fly-ash as cement in concrete mixes. In this present study of concrete produced using fly ash, pond ash and OPC 53 grade will be carried. An attempt will be made to investigate characteristics of OPC concrete with combined fly ash and pond ash mixed concrete for Compressive Strength test, Split Tensile Strength test, Flexural Strength test and Durability tests. This paper deals with the review of literature for fly-ash and pond-ash as partial replacement of cement in concrete.

Download Full-text

PADDY RESIDUE AS FEEDSTOCK IN ELECTRICITY GENERATION: REDEMPTION OF LIFE CYCLE EMISSIONS AND COST ANALYSIS

Journal of Technology and Operations Management ◽

10.32890/jtom2018.13.1.6 ◽

2018 ◽

Vol 13 (Number 1) ◽

pp. 55-67

Author(s):

Shafini M. Shafie ◽

Zakirah Othman ◽

N Hami

Keyword(s):

Power Generation ◽

Life Cycle ◽

Cost Analysis ◽

Positive Feedback ◽

Energy Supply ◽

Electricity Generation ◽

Economic Sector ◽

Ghg Emission ◽

Coal Fuel ◽

Biomass Resources

Malaysia has an abundance of biomass resources that can be utilised for power generation. One of them is paddy residue. Paddy residue creates ahuge potential in the power generation sector. The consumption of paddy residue can help Malaysia become less dependent on conventional sources of energy, mitigate greenhouse gas(GHG) emission, offer positive feedback in the economic sector, and at the same time, provide thebest solution for waste management activities. The forecast datafor 20 years on electricity generation wasused to calculate the GHG emission and its saving when paddy residue is used for electricity generation. The government’scost saving was also identified when paddy residue substituted coal fuel in electricity generation.This paper can provide forecast information so that Malaysia is able to move forward to apply paddy residue as feedstock in energy supply. Hopefully, the data achieved can encourage stakeholder bodies in the implementation of paddy residue inelectricity generation since there is apositive impact towardscost and emission saving.

Download Full-text