Dual-effect core–shell polyphenol coated silver nanoparticles for tissue engineering

2021 ◽  
Vol 26 ◽  
pp. 100716
Author(s):  
Juan Manuel Galdopórpora ◽  
Angelina Ibar ◽  
Maria Victoria Tuttolomondo ◽  
Martin Federico Desimone
Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1007
Author(s):  
Azam Ali ◽  
Mariyam Sattar ◽  
Fiaz Hussain ◽  
Muhammad Humble Khalid Tareen ◽  
Jiri Militky ◽  
...  

The versatile one-pot green synthesis of a highly concentrated and stable colloidal dispersion of silver nanoparticles (Ag NPs) was carried out using the self-assembled tannic acid without using any other hazardous chemicals. Tannic acid (Plant-based polyphenol) was used as a reducing and stabilizing agent for silver nitrate in a mild alkaline condition. The synthesized Ag NPs were characterized for their concentration, capping, size distribution, and shape. The experimental results confirmed the successful synthesis of nearly spherical and highly concentrated (2281 ppm) Ag NPs, capped with poly-tannic acid (Ag NPs-PTA). The average particle size of Ag NPs-PTA was found to be 9.90 ± 1.60 nm. The colloidal dispersion of synthesized nanoparticles was observed to be stable for more than 15 months in the ambient environment (25 °C, 65% relative humidity). The synthesized AgNPs-PTA showed an effective antimicrobial activity against Staphylococcus Aureus (ZOI 3.0 mM) and Escherichia coli (ZOI 3.5 mM). Ag NPs-PTA also exhibited enhanced catalytic properties. It reduces 4-nitrophenol into 4-aminophenol in the presence of NaBH4 with a normalized rate constant (Knor = K/m) of 615.04 mL·s−1·mg−1. For comparison, bare Ag NPs show catalytic activity with a normalized rate constant of 139.78 mL·s−1·mg−1. Furthermore, AgNPs-PTA were stable for more than 15 months under ambient conditions. The ultra-high catalytic and good antimicrobial properties can be attributed to the fine size and good aqueous stability of Ag NPs-PTA. The unique core-shell structure and ease of synthesis render the synthesized nanoparticles superior to others, with potential for large-scale applications, especially in the field of catalysis and medical.


2019 ◽  
Vol 97 ◽  
pp. 325-335 ◽  
Author(s):  
Peng Chen ◽  
Leyun Liu ◽  
Jiaqi Pan ◽  
Jie Mei ◽  
Chaorong Li ◽  
...  

2018 ◽  
Vol 92 ◽  
pp. 685-693 ◽  
Author(s):  
Varun Prasath Padmanabhan ◽  
Ravichandran Kulandaivelu ◽  
Sankara Narayanan T.S. Nellaiappan

Nanoscale ◽  
2018 ◽  
Vol 10 (19) ◽  
pp. 9186-9191 ◽  
Author(s):  
Nathalie Claes ◽  
Ramesh Asapu ◽  
Natan Blommaerts ◽  
Sammy W. Verbruggen ◽  
Silvia Lenaerts ◽  
...  

Using electron microscopy, polymer encapsulated silver nanoparticles were visualized and their coverage, molecular structure and plasmonic properties could be investigated.


Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 283 ◽  
Author(s):  
Catalina-Andreea Dascalu ◽  
Florin Miculescu ◽  
Aura-Catalina Mocanu ◽  
Andreea Elena Constantinescu ◽  
Tudor Mihai Butte ◽  
...  

Bone tissue engineering is constantly in need of new material development with improved biocompatibility or mechanical features closer to those of natural bone. Other important factors are the sustainability, cost, and origin of the natural precursors involved in the technological process. This study focused on two widely used polymers in tissue engineering, namely polylactic acid (PLA) and thermoplastic polyurethane (TPU), as well as bovine-bone-derived hydroxyapatite (HA) for the manufacturing of core-shell structures. In order to embed the ceramic particles on the polymeric filaments surface, the materials were introduced in an electrical oven at various temperatures and exposure times and under various pressing forces. The obtained core-shell structures were characterized in terms of morphology and composition, and a pull-out test was used to demonstrate the particles adhesion on the polymeric filaments structure. Thermal properties (modulated temperature and exposure time) and the pressing force’s influence upon HA particles’ insertion degree were evaluated. More to the point, the form variation factor and the mass variation led to the optimal technological parameters for the synthesis of core-shell materials for prospect additive manufacturing and regenerative medicine applications.


Sign in / Sign up

Export Citation Format

Share Document