scholarly journals Thermal annealing-induced enhanced ordering and optical functions modification on poly(3-octylthiophene) films

2019 ◽  
Vol 75 ◽  
pp. 270-276
Author(s):  
T.A. Zidan ◽  
E.M. El-Menyawy
Keyword(s):  
Thermal Annealing ◽  
Optical Functions

Annealing Of Radiation Damage in Tungsten

1970 ◽  
Vol 28 ◽  
pp. 412-413
Author(s):  
Robert C. Rau ◽  
John Moteff
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Radiation Damage ◽  
Thermal Annealing ◽  
Neutron Fluence ◽  
Dislocation Loops ◽  
Defect Clusters ◽  
Polycrystalline Tungsten ◽  
Transmission Electron ◽  
Radiation Induced

Transmission electron microscopy has been used to study the thermal annealing of radiation induced defect clusters in polycrystalline tungsten. Specimens were taken from cylindrical tensile bars which had been irradiated to a fast (E > 1 MeV) neutron fluence of 4.2 × 1019 n/cm2 at 70°C, annealed for one hour at various temperatures in argon, and tensile tested at 240°C in helium. Foils from both the unstressed button heads and the reduced areas near the fracture were examined.Figure 1 shows typical microstructures in button head foils. In the unannealed condition, Fig. 1(a), a dispersion of fine dot clusters was present. Annealing at 435°C, Fig. 1(b), produced an apparent slight decrease in cluster concentration, but annealing at 740°C, Fig. 1(C), resulted in a noticeable densification of the clusters. Finally, annealing at 900°C and 1040°C, Figs. 1(d) and (e), caused a definite decrease in cluster concentration and led to the formation of resolvable dislocation loops.

L10 Ordering of FePt Thin Films by Rapid Thermal Annealing

2003 ◽  
Vol 27 (11) ◽  
pp. 1083-1086 ◽  
Author(s):  
H. Ito ◽  
T. Kusunoki ◽  
H. Saito ◽  
S. Ishio
Keyword(s):  
Thin Films ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Fept Thin Films

Optical and Electrical Characteristics of Amorphous InGaZnO after Thermal Annealing

2008 ◽  
Author(s):  
Satoshi Taniguchi ◽  
Norihiko Yamaguchi ◽  
Takao Miyajima ◽  
Masao Ikeda
Keyword(s):  
Thermal Annealing ◽  
Electrical Characteristics ◽  
Amorphous Ingazno

Effect of Thermal Annealing on Characteristics of Polycrystalline Silicon used for Solar Cells

2008 ◽  
Author(s):  
Gou XianFang ◽  
li xudong ◽  
xu ying ◽  
liang xinqing
Keyword(s):  
Solar Cells ◽  
Thermal Annealing ◽  
Polycrystalline Silicon

Effect of a Ti-capped and Ti-mediated Layer on Co Silicide Formation

2002 ◽  
Vol 716 ◽  
Author(s):  
G.Z. Pan ◽  
E.W. Chang ◽  
Y. Rahmat-Samii
Keyword(s):  
Electron Diffraction ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Diffusion Barrier ◽  
Silicide Formation ◽  
Plan View ◽  
Processing Window

AbstractWe comparatively studied the formation of ultra thin Co silicides, Co2Si, CoSi and CoSi2, with/without a Ti-capped and Ti-mediated layer by using rapid thermal annealing in a N2 ambient. Four-point-probe sheet resistance measurements and plan-view electron diffraction were used to characterize the silicides as well as the epitaxial characteristics of CoSi2 with Si. We found that the formation of the Co silicides and their existing duration are strongly influenced by the presence of a Ti-capped and Ti-mediated layer. A Ti-capped layer promotes significantly CoSi formation but suppresses Co2Si, and delays CoSi2, which advantageously increases the silicidation-processing window. A Ti-mediated layer acting as a diffusion barrier to the supply of Co suppresses the formation of both Co2Si and CoSi but energetically favors directly forming CoSi2. Plan-view electron diffraction studies indicated that both a Ti-capped and Ti-mediated layer could be used to form ultra thin epitaxial CoSi2 silicide.

Plasma Enhanced Chemical Vapor Deposition of Porous Organosilicate Glass ILD Films With k ≤ 2.4.

2003 ◽  
Vol 766 ◽  
Author(s):  
Raymond N. Vrtis ◽  
Mark L. O'Neill ◽  
Jean L. Vincent ◽  
Aaron S. Lukas ◽  
Brian K. Peterson ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Chemical Vapor Deposition ◽  
Mechanical Strength ◽  
Thermal Annealing ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organosilicate Glass

AbstractWe report on our work to develop a process for depositing nanoporous organosilicate (OSG) films via plasma enhanced chemical vapor deposition (PECVD). This approach entails codepositing an OSG material with a plasma polymerizable hydrocarbon, followed by thermal annealing of the material to remove the porogen, leaving an OSG matrix with nano-sized voids. The dielectric constant of the final film is controlled by varying the ratio of porogen precursor to OSG precursor in the delivery gas. Because of the need to maintain the mechanical strength of the final material, diethoxymethylsilane (DEMS) is utilized as the OSG precursor. Utilizing this route we are able to deposit films with a dielectric constant of 2.55 to 2.20 and hardness of 0.7 to 0.3 GPa, respectively.

Effect of rapid thermal annealing on sprayed Cu2SnS3 thin films for solar-cell application

2020 ◽  
Vol 59 (10) ◽  
pp. 105503
Author(s):  
Wafaa Magdy ◽  
Ayaka Kanai ◽  
F. A. Mahmoud ◽  
E. T. El Shenawy ◽  
S. A. Khairy ◽  
...  
Keyword(s):  
Thin Films ◽  
Solar Cell ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Solar Cell Application

Photolytic and thermal annealing of radical anions gamma-irradiated monocarboxylic acids

1979 ◽  
Vol 44 (12) ◽  
pp. 3632-3643 ◽  
Author(s):  
Karel Mach ◽  
Igor Janovský ◽  
Karel Vacek
Keyword(s):  
Thermal Annealing ◽  
Pivalic Acid ◽  
Esr Spectra ◽  
Paramagnetic Species ◽  
Radical Anions ◽  
Γ Irradiation ◽  
Before And After ◽  
Optical Bleaching ◽  
The Difference ◽  
Gamma Irradiated

Total yields of paramagnetic species, their optical bleaching and thermal annealing in acetic, propionic, a-butyric, isobutyric, and pivalic acid γ-irradiated at 77 K were followed by ESR spectroscopy. Radical anions, always found after irradiation, disappear during optical bleaching without formation of any paramagnetic product. During thermal annealing they are converted almost quantitatively into the α-radicals of the respective acid, with the exception of pivalic acid. Amounts of radical anions were estimated from the difference of integrated ESR spectra taken before and after optical bleaching. The results show that approximately equal amounts of the reduction and oxidation paramagnetic products of the γ-irradiation can be detected.

scholarly journals The main role of thermal annealing in controlling the structural and optical properties of ITO thin film layer

2021 ◽  
Vol 113 ◽  
pp. 110866 ◽  
Author(s):  
Moustafa Ahmed ◽  
Ahmed Bakry ◽  
Ammar Qasem ◽  
Hamed Dalir
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Thermal Annealing ◽  
Main Role ◽  
Structural And Optical Properties ◽  
Thin Film Layer ◽  
Film Layer
Sign in / Sign up

Export Citation Format

Share Document