scholarly journals Analytic process model for flexible manufacturing of cylindrical or conical sheet metal profiles in an incremental sequence

Procedia CIRP ◽  
2021 ◽  
Vol 99 ◽  
pp. 254-259
Author(s):  
Peter Frohn-Sörensen ◽  
Wolfram Hochstrate ◽  
Michael Schiller ◽  
Dominique Schneider ◽  
Bernd Engel
Keyword(s):  
Sheet Metal ◽  
Flexible Manufacturing ◽  
Process Model ◽  
Analytic Process ◽  
Sheet Metal Profiles

scholarly journals Sheet Metal Profiles with Variable Height: Numerical Analyses on Flexible Roller Beading

2019 ◽  
Vol 3 (1) ◽  
pp. 19
Author(s):  
Tianbo Wang ◽  
Peter Groche
Keyword(s):  
Sheet Metal ◽  
Flexible Manufacturing ◽  
Variable Cross Section ◽  
Test Facility ◽  
Variable Cross ◽  
Forming Process ◽  
Compressive Stresses ◽  
Component Design ◽  
Forming Strategy ◽  
Sheet Metal Profiles

In the spirit of flexible manufacturing, the novel forming process “flexible roller beading” was developed, which allows the incremental production of height-variable sheet metal profiles. After designing the process and realizing a test facility for flexible roller beading, the feasibility was experimentally shown. The following step addresses the expansion of the process limits. With this aim, the mechanical behavior of the sheet metal during the process was investigated by means of FEA. Due to the variable cross-section development of the sheet metal profile, a multidimensional stress distribution was identified. Based on the present state of stress and strain, conclusions about the origin of appearing defect formations were drawn. Observed defects were sheet wrinkles as a result of compressive stresses in the profile flange and material thinning in the profile legs and bottom due to unintendedly exceeding tensile stresses. The influences of the forming strategy as well as tool- and workpiece-side variations on the quality of the manufacturing result were investigated. From the results of the analyses, measures to avoid component failure were derived. Given all the findings, guidelines were concluded that are to be considered in designing the forming sequence. With the insights into the occurring processes and the mastery of this novel forming process, important contributions are made to its industrial suitability. The approach of lightweight and load-oriented component design can be extended by realizing new families of sheet metal profiles. With respect to Industry 4.0, on-demand manufacturing is increasingly required, which is why flexible roller beading is of substantial relevance for the industrial sheet metal production.

Process Characterization of Sheet Metal Spinning by Means of Finite Elements

2007 ◽  
Vol 344 ◽  
pp. 637-644 ◽  
Author(s):  
Gerd Sebastiani ◽  
Alexander Brosius ◽  
Werner Homberg ◽  
Matthias Kleiner
Keyword(s):  
Finite Element ◽  
Sheet Metal ◽  
Flexible Manufacturing ◽  
Theoretical Models ◽  
Element Model ◽  
Axially Symmetric ◽  
Element Analysis ◽  
Cross Sectional ◽  
Process Characterization ◽  
Metal Spinning

Sheet Metal Spinning is a flexible manufacturing process for axially-symmetric hollow components. While the process itself is already known for centuries, process planning is still based on undocumented expertise, thus requiring specialized craftsmen for new process layouts. Current process descriptions indicate a vast scope of different dynamic influences while the underlying mechanical model uses a simple static approach. Thus, a 3D Finite Element Model of the process has been set up at IUL in order to analyze the process in detail, providing online as well as cross sectional data of the specimen formed. Within the scope of this article, the results of the above mentioned Finite Element Analysis (FEA) are presented and discussed with respect to the qualitative stress distributions introduced in the existing theoretical models. Main emphasis of this paper is set on a discussion of the qualitative stress distribution, which is, to the current state, only known in theory.

A Numerical and Experimental Study of Sheet Metal Bending by Pulsed Nd:Yag Laser with DOE Method

2009 ◽  
Vol 83-86 ◽  
pp. 1076-1083 ◽  
Author(s):  
M. Hosseinpour Gollo ◽  
Hassan Moslemi Naeini ◽  
G.H. Liaghat ◽  
S. Jelvani ◽  
M.J. Torkamany
Keyword(s):  
Experimental Study ◽  
Sheet Metal ◽  
Nd:Yag Laser ◽  
Metal Forming ◽  
Flexible Manufacturing ◽  
Three Dimensional ◽  
Laser Source ◽  
Laser Forming ◽  
Beam Diameter ◽  
Doubly Curved

Metal forming by a laser source is an efficient and economical method for forming sheet metal into straight bend and doubly curved shape. It can be most useful in the automation of sheet metal forming. This paper presents an FEM model for three dimensional thermo-mechanical simulation of the laser forming. The aim of this simulation and experimental study is to identify the response related to deformation and characterize the effects of process parameters such as laser power, beam diameter, scans velocity and pulse duration, in terms of bending angle for a square sheet part. Extensive experimentation, including a design of experiments, is performed to address the above-mentioned aims. From these experiments it has been determined that laser forming using Nd:YAG laser is a flexible manufacturing process for steel sheet bending.

Multi-Input Multi-Output (MIMO) Modeling and Control for Stamping

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Yongseob Lim ◽  
Ravinder Venugopal ◽  
A. Galip Ulsoy
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Material Flow ◽  
Process Model ◽  
Complex Geometry ◽  
Flow Characteristics ◽  
Forming Process ◽  
Punch Force ◽  
Force System

The binder force in sheet metal forming controls the material flow into the die cavity. Maintaining precise material flow characteristics is crucial for producing a high-quality stamped part. Process control can be used to adjust the binder force based on tracking of a reference punch force trajectory to improve part quality and consistency. The purpose of this paper is to present a systematic approach to the design and implementation of a suitable multi-input multi-output (MIMO) process controller. An appropriate process model structure for the purpose of controller design for the sheet metal forming process is presented and the parameter estimation for this model is accomplished using system identification methods. This paper is based on original experiments performed with a new variable blank holder force (or variable binder force) system that includes 12 hydraulic actuators to control the binder force. Experimental results from a complex-geometry part show that the MIMO process controller designed through simulation is effective.

Driving – A Flexible Manufacturing Method for Individualized Sheet Metal Products

2010 ◽  
Vol 447-448 ◽  
pp. 795-800
Author(s):  
Daniel Scherer ◽  
Z. Yang ◽  
H. Hoffmann
Keyword(s):  
Production Process ◽  
Sheet Metal ◽  
Flexible Manufacturing ◽  
Incremental Forming ◽  
Industrial Robot ◽  
General Information ◽  
Work Piece ◽  
Forming Process ◽  
Manufacturing Method ◽  
Metal Products

This paper provides general information about the qualification of driving as an on-demand manufacturing concept for the production of individualized sheet metal products. Driving allows the creation of almost any 2D or 3D geometry, but it is a highly interactive, manual production process. Due to the inevitable variations of the incremental forming process (mechanical properties, tribology, wear etc.) and the high number of forming steps, it cannot be automated by traditional approaches. At the Institute of Metal Forming and Casting (Technische Universitaet Muenchen) a kraftformer machine has been equipped with measuring and controlling instrumentation. An optical online measurement system is installed to detect any geometry deformation of the current work piece and to visualize the deviation between the actual and the stored reference geometry during the whole production process. This variance comparison is the first step for planning any following incremental forming actions based on acquired and/or learned knowledge. The second step is the integration of an industrial robot for work piece handling and the automation of the whole manufacturing process. The last step is the integration of neural networks to predict production strategies for any desired unique geometry.

scholarly journals Investigation of Effects of Material Dimensions on Wrinkling in Flexforming Process

2021 ◽  
Author(s):  
Gürhan Yılgın ◽  
Oguzhan Yilmaz ◽  
Fahrettin Ozturk ◽  
Hasan Ali Hatipoglu
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Flexible Manufacturing ◽  
Research Work ◽  
Sheet Thickness ◽  
Production Costs ◽  
Material Condition ◽  
Material Conditions ◽  
Experimental Findings

Abstract Sheet metal forming processes are very common manufacturing and leading processes in automotive and aerospace industries. Flexforming is one of the sheet metal forming processes which is preferable due to its flexible manufacturing capabilities and its ability to produce multiple parts simultaneously. Convex contoured shaped parts are very much used in aerospace structures which are mostly produced by flexforming. Wrinkling is a characteristic defect for those kinds of parts. Prediction of wrinkling before manufacturing is highly crucial in order to reduce scrap rates, labor time, and other unexpected costs. In this research work, extensive amounts of experiments are conducted on flexforming press, and the process parameters such as material condition, contour radius, flange length, and material thickness which induce wrinkling are investigated in detail. Results have shown that sheet thickness is the most effective parameter, and as the sheet thickness is increased, wrinkling tendency is reduced extensively. Besides, increasing convex contour radius decreases wrinkling occurrence. Experimental findings are then used to generate wrinkling limit diagrams in which safety and failure zones are specified for different material conditions and sheet thicknesses. The developed diagrams might help to designer who can design defect free parts, reduce scrap rates, and reduce production costs significantly.

Sign in / Sign up

Export Citation Format

Share Document