An intraoral method of verifying interocclusal distance for completely edentulous patients

2021 ◽  
Author(s):  
Majid Bissasu ◽  
Sami Bissasu
Keyword(s):  
Interocclusal Distance ◽  
Edentulous Patients

scholarly journals Short term evaluation of interocclusal distance during speech after new removable prosthesis insertion

2003 ◽  
Vol 11 (3) ◽  
pp. 216-222 ◽  
Author(s):  
Renata Cunha Matheus Rodrigues Garcia ◽  
Viviane Maia Barreto Oliveira ◽  
Altair Antoninha Del Bel Cury
Keyword(s):  
T Test ◽  
Magnetic Method ◽  
Control Group ◽  
Oral Rehabilitation ◽  
Significant Difference ◽  
Before And After ◽  
Short Term Evaluation ◽  
Interocclusal Distance ◽  
Removable Prosthesis ◽  
Edentulous Patients

The aim of this study was to evaluate the interocclusal distance during the pronunciation of /m/ and /s/ sounds from Portuguese Language, in partially edentulous patients before and after new partial and total prosthesis installation. The subjects were divided into two groups: Experimental group, consisting of 9 patients entirely edentate in the upper maxillary arch and classified as Kennedy Class I in the lower arch; and Control group, consisting of 9 totally dentate patients. The subjects from the first group had their worn out dentures changed and the occlusal vertical dimension (OVD) corrected. A magnetic method of jaw tracking was used to measure the interocclusal distance (mm) during pronunciation of those phonemes. Comparison between groups, by t test, showed significant difference (p<0.05) for /m/ sound in all periods of time: before prosthesis installation - T0 (3.38±1.23), immediately - T1 (2.15±1.06), six hours - T2 (3.41±1.33), twenty-four hours - T3 (2.92±0.92), two days - T4 (4.80±1.93), one week - T5 (3.87±1.43), two weeks - T6 (3.03±0.96), one month - T7 (3.03±0.96), two months - T8 (4.47±1.45) and three months - T9 (4.33±2.56), except for six months - T10 after prosthesis installation. For /s/ sound phoneme the results were different (p<0.05) between the groups in T1 (2.89±1.33), T2 (3.37±1.22), T3 (3.19±1.06), T4 (3.86±1.21), T5 (3.83±1.32), T6 (3.27±1.10), T7 (3.37±0.99) and T10 (3.84±1.38) after oral rehabilitation. The paired-t test, for means comparison between before and after prosthesis insertion, indicated significant differences (p<0.05) for /m/ sound only in T1, and for /s/ sound in T1, T2, T3, T6, T7 and T10. It was concluded that new prosthesis insertion, correcting the OVD, changes the interocclusal distance, and for /m/ sound this distance could be recovered after six months of prosthesis wearing.

Scanning electron microscopy of composite hydroxylapatite/plaster implants for bone reconstruction

1986 ◽  
Vol 44 ◽  
pp. 326-327
Author(s):  
J. S. Hanker ◽  
B. L. Giammara
Keyword(s):  
Tooth Extraction ◽  
Alveolar Ridge ◽  
Small Particles ◽  
Alveolar Ridge Augmentation ◽  
Sintered Ceramic ◽  
Ridge Augmentation ◽  
Fibrovascular Tissue ◽  
Infrabony Defects ◽  
Edentulous Patients ◽  
Scanning Electron

Nonresorbable sintered ceramic hydroxylapatite (HA) is widely employed for filling defects in jaw bone. The small particles used for alveolar ridge augmentation in edentulous patients or for infrabony defects due to periodontal disease tend to scatter when implanted using water or saline as the vehicle. Larger blocks of this material used for filling sockets after tooth extraction don't fit well. Studies in our laboratory where we compared bovine serum albumin, collagen and plaster of Paris as binders to prevent particle scatter during implantation suggested that plaster was most useful for this purpose. In addition to preventing scatter of the particles, plaster enables the formation of implants of any size and.shape either prior to or during surgery. Studies with the PATS reaction have indicated that plaster acts as a scaffold for the incorporation of HA particles into bone in areas where the implant contacts either host bone or periosteum. The shape and integrity of the implant is maintained by the plaster component until it is replaced over a period of days by fibrovascular tissue.

A STUDY ON CLINICAL AND X - RAY FEATURES OF PARTIALLY&NBSP; EDENTULOUS PATIENTS WITH DENTAL IMPLANT

2011 ◽  
pp. 96-103
Author(s):  
Quang Hai Nguyen ◽  
Toai Nguyen
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Tooth Loss ◽  
Permanent Teeth ◽  
Missing Teeth ◽  
X Ray ◽  
Lower Jaw ◽  
Molar Teeth ◽  
Edentulous Patients ◽  
Missing Tooth

1. Background: Loss of permanent teeth is very common, affected chewing function, speech and aesthetics; restoration of missing teeth with dental implant has several advantages, but we need thoroughly study the clinical and X ray features at the position at missing teeth, then to select the type of implant and make the best plan for the dental implant patients. 2. Materials and method: Cross-section descriptive study. From January 2009 to November 2010, study with 56 patients with 102 implants of MIS and Megagen systems at the Faculty of Odonto-Stomatology, Hue College of Medicine and Pharmacy and Vietnam-Cuba Hospital in Ha Noi. 3. Results: Distributed equally in male and female, common ages 40 – 59 (55,4%), the majority of missing teeth occurs in the lower jaw (63,8%) and especially, the teeth 36 and 46 (25,4%). The majority of missing teeth due to dental caries, dental pulp and apical diseases (64,7%) of the molar teeth (51,9%); the most position of missing tooth have enough bone for dental implants (87,3%), time of tooth loss and bone status in the position of tooth loss are related to each other (p < 0,01). Diameter and length of implant usually used 4.0 – 6.0 mm (63,7%) and 8.5 – 13.0 mm (83,3%). 4. Conclusion: Clinical and X ray features of edentulous patients has an important role in determining the type of implants and treatment planning of dental implants. Key words: Loss of permanent teeth, X ray and clinical features, Dental implant.

Clinical experience of quartz reinforcing mesh usage in production of full removable laminar upper dentures

2019 ◽  
pp. 4-9
Author(s):  
V.G. Galonsky ◽  
B.F. Cherkashin ◽  
A.A. Kharlamova ◽  
S.V. Kungurov ◽  
A.V. Gradoboev ◽  
...  
Keyword(s):  
Clinical Experience ◽  
Clinical Observation ◽  
Acrylic Plastic ◽  
Orthopaedic Treatment ◽  
Alternative Approach ◽  
Removable Denture ◽  
Edentulous Patients ◽  
Metal Meshes ◽  
Modern Technologies

The study is devoted to one of relevant topics in orthopaedic dentistry: orthopaedic treatment for fully edentulous patients with application of removable laminar dentures the basis of which is produced from acrylic plastic. The main problem of this approach has been formulated: the possibility of frequent crashing of the basis by the patient within earlier and later periods after the beginning of prosthesis exploitation. Options in prevention of this problem have been considered — reinforcing of the denture basis using standard and individually produced metal meshes — as well as their disadvantages. A study based on longitudinal clinical observation within terms of up to five years of exploitation effectiveness in quartz reinforcing mesh application to removable denture bases as an alternative approach to modern technologies has been carried out. Application features and advantages of this technology have been presented.

scholarly journals Effect of mandibular complete dentures relining on occlusal force distribution using T-scan system

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Eman M. Ibraheem ◽  
Hisham S. ElGabry
Keyword(s):  
Trial Registration ◽  
Force Distribution ◽  
Complete Dentures ◽  
Clinical Trial Registration ◽  
Occlusal Force ◽  
Left Posterior ◽  
Before And After ◽  
Soft Denture Liner ◽  
Edentulous Patients ◽  
Posterior Area

Abstract Background This study aimed to evaluate the effect of mandibular complete dentures relining using soft relining material on the distribution of various occlusal forces using T-Scan system. Fifty completely edentulous patients having their conventional complete dentures earlier fabricated and utilized were selected for this study. Patients were controlled diabetics, characterized by having their residual alveolar ridges moderately developed and lined with firm mucoperiosteum. Mandibular complete dentures were relined with soft denture liner and T-Scan device was used for occlusal force distribution measurement prior to denture relining and three months thereafter the relinning procedure. Results Comparison between occlusal forces percentages before and after denture relining revealed that occlusal forces percentages was significantly lower after denture relining in anterior area, significantly higher after denture relining in right posterior area, where it was insignificantly higher after relining in left posterior area. Conclusions Our findings revealed that the use of soft denture liner for mandibular complete denture relining significantly improved the occlusal load distribution. Clinical trial registration Trial registration NCT, NCT04701970. Registered 23/11/2020—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT04701970

scholarly journals Determination of the Vertical Dimension and the Position of the Occlusal Plane in a Removable Prosthesis Using Cephalometric Analysis and Golden Proportion

2021 ◽  
Vol 11 (15) ◽  
pp. 6948
Author(s):  
Gabriele Cervino ◽  
Sergio Sambataro ◽  
Chiara Stumpo ◽  
Salvatore Bocchieri ◽  
Fausto Murabito ◽  
...  
Keyword(s):  
Vertical Dimension ◽  
Occlusal Plane ◽  
X Rays ◽  
Common Procedure ◽  
Lower Incisor ◽  
Golden Proportion ◽  
The Face ◽  
Removable Prosthesis ◽  
Edentulous Patients

The aim of this study is to demonstrate the use and the effectiveness of cephalometry and golden proportions analysis of the face in planning prosthetic treatments in totally edentulous patients. In order to apply this method, latero-lateral and posterior-anterior X-rays must be performed in addition to the common procedure. Two main concerns for totally edentulous patients are the establishment of the vertical dimension and the new position of the occlusal plane. The divine proportion analysis was carried out by the use of a golden divider. The prosthetic protocol was divided into three steps and a case was selected for better understanding. Referring to the golden relations, if the distance from the chin to the wing of the nose is 1.0, the distance from the nose to eye is 0.618. This proportion is useful and effective in determining the correct prosthetic vertical dimension. The incisal margin of the lower incisor must be positioned between Point A (A) and protuberance menti (Pm) according to the gold ratio 0.618 of the total height A-Pm. Posteriorly the occlusal plane must be placed 2 mm below the divine occlusal plane (traced from the incisal margin of lower incisors to Xi point). A prosthesis made in accordance with cephalometric parameters and divine proportions of the face helps to improve the patient’s aesthetics, function and social personality.

Sign in / Sign up

Export Citation Format

Share Document