scholarly journals Determination of the Vertical Dimension and the Position of the Occlusal Plane in a Removable Prosthesis Using Cephalometric Analysis and Golden Proportion

2021 ◽  
Vol 11 (15) ◽  
pp. 6948
Author(s):  
Gabriele Cervino ◽  
Sergio Sambataro ◽  
Chiara Stumpo ◽  
Salvatore Bocchieri ◽  
Fausto Murabito ◽  
...  

The aim of this study is to demonstrate the use and the effectiveness of cephalometry and golden proportions analysis of the face in planning prosthetic treatments in totally edentulous patients. In order to apply this method, latero-lateral and posterior-anterior X-rays must be performed in addition to the common procedure. Two main concerns for totally edentulous patients are the establishment of the vertical dimension and the new position of the occlusal plane. The divine proportion analysis was carried out by the use of a golden divider. The prosthetic protocol was divided into three steps and a case was selected for better understanding. Referring to the golden relations, if the distance from the chin to the wing of the nose is 1.0, the distance from the nose to eye is 0.618. This proportion is useful and effective in determining the correct prosthetic vertical dimension. The incisal margin of the lower incisor must be positioned between Point A (A) and protuberance menti (Pm) according to the gold ratio 0.618 of the total height A-Pm. Posteriorly the occlusal plane must be placed 2 mm below the divine occlusal plane (traced from the incisal margin of lower incisors to Xi point). A prosthesis made in accordance with cephalometric parameters and divine proportions of the face helps to improve the patient’s aesthetics, function and social personality.

2012 ◽  
Vol 65 (5-6) ◽  
pp. 217-222 ◽  
Author(s):  
Ljiljana Strajnic ◽  
Darinka Stanisic-Sinobad

Introduction. Optimal reconstruction of vertical dimension of occlusion is crucial for functional and physiognomic rehabilitation of edentulous patients. This article is aimed at presenting attitudes and studies on application of cephalometric analysis in obtaining optimal vertical dimension of occlusion. The review of literature presents the studies which analyse the possibilities of cephalometric analysis aimed at improving the clinical methods for vertical dimension of occlusion determination in treatment of edentulous patients. The research carried out so far can roughly be divided into: cephalometric vertical dimension of occlusion evaluation in dentulous patients performed to determine precise indicators of vertical dimension of occlusion and to establish cephalometric standards for practical application in prosthodontics; the method of producing pre-extraction cephalometric registries involves the production of cephalometric radiographs for potential prosthodontic patients in dental pre-extraction period which are kept for reference to be used in later therapy; the cephalometric method of registering the position of physiologic rest position of the mandible involves measuring cephalometric parameters in cephalometric radiographs made when the mandible is in physiologic rest position; cephalometric evaluation of vertical dimension of occlusion in complete denture therapy after clinical determination of intemaxillary relationship is recommended for timely detection of possible mistakes, with a possibility of correction in the process of complete denture production; and cephalometric analysis in edentulous patients with old complete dentures for a planned vertical dimension of occlusion extension. Conclusion. Data from the literature give no proof of a scientific and universally accepted method for precise determination of vertical dimension of occlusion, which is a point many authors agree upon. Different methods proposed for vertical dimension of occlusion determination in everyday practice are usually recommended in combination with other methods. Determination of individual, morphological vertical dimension of occlusion indicators by cephalometric analysis is, in this sense, one of the directions for finding a better solution when planning an artificial occlusion complex.


2021 ◽  
Vol 9 (D) ◽  
pp. 108-112
Author(s):  
Ayman A. Elmorsy ◽  
Mohamed Zaki ◽  
Hafiz Elbahnaswi ◽  
Amani R. Moussa ◽  
Asmaa N. Elboraey

BACKGROUND: The establishment of appropriate vertical dimension of occlusion (VDO) is paramount for successful and functioning complete dentures (CDs). AIM: The aim of this study was to assess the effect of alteration of VDO on the brain activity in CD wearers. MATERIALS AND METHODS: Ten completely edentulous patients participated in this study. Each patient received three sets of CDs: one control set and two duplicates’ CDs. The control CDs was designed with appropriate VDO (control - VDO), while the duplicate CDs were designated as followed: one with VDO lowered by –3 mm (low - VDO) the other one VDO was increased by +5 mm (high - VDO). The effect of alteration of VDO on brain activity was assessed by measuring alpha waves changes using electroencephalogram (EEG) before and after chewing gum. Statistical analysis was carried out using one-way ANOVA and dependent t-test. The significance level was set at p < 0.05. RESULTS: There was a significant increase in the alpha waves mean values after chewing (p < 0.05) gum compared to before except for low - VDO CDs (p > 0.05). The control-VDO revealed a statistically significant higher mean values compared to the duplicate dentures. CDs with high - VDO showed higher mean value than low - VDO dentures, however, it was statistically insignificant (p > 0.05). CONCLUSION: Appropriate determination of VDO is not only important for the success of CDs but also for the functional augmentation of brain activity.


2021 ◽  
Vol 8 ◽  
Author(s):  
Jihane El Aoud ◽  
Wijdane El Hawari ◽  
Nadia Merzouk ◽  
Faiza Benfdil

The rehabilitation by complete removable denture is commonly used for edentulous patients. The respect of operating procedures represents the main condition for therapeutic success.Among these procedures, the determination and the orientation of occlusal plane remain an important step to respect minutelyIndeed, it is one of the most stages for obtaining an optimal smile esthetic, a facial harmony and improve the oral functions.Various technics were reported by many authors: anatomical, radiographic, and physiologic methods such as piezography and Paterson technic.This later consists on the determination of the individualized occlusal plane according to the registration of physiological movements.In this context, we will describe Paterson method via a case report and discuss its feasibility, clinical effectiveness as well as its advantages compared to others technics.


2021 ◽  
Vol 7 (3) ◽  
pp. 124-127
Author(s):  
Ramandeep Singh ◽  
Sonali Sharma ◽  
Aquib Javaid ◽  
Asusa Cicilia Loli ◽  
Chander Udhey ◽  
...  

Denture esthetics in the field of prosthodontics has become a prime most demand of the edentulous patients in the recent time. The different processes that are required in the fabrication of complete denture in terms of esthetics constitutes from impression making, selection of teeth, occlusion, proper vertical dimension, accurate recording of the occlusal plane and a good smile line.


2018 ◽  
Vol 45 (5) ◽  
pp. 399-405 ◽  
Author(s):  
N. Enkling ◽  
J. Enkling-Scholl ◽  
D. Albrecht ◽  
M. M. Bornstein ◽  
M. Schimmel

2020 ◽  
Vol 7 ◽  
Author(s):  
Anissa Regragui ◽  
Amal Bouziane ◽  
Najib Al Idrissi ◽  
Faiza Benfdil ◽  
Nadia Merzouk

Goal of the study : To detect the prevalence, association and correlation that may exist between the vertical dimension of occlusion and certain facial clues in a toothed population in search of a simplified method for the determination of DVO in complete edentulous people.Introduction : The methods for recording the vertical dimension of occlusion, rest or phonetic vertical are very numerous, attesting to the absence of a universal scientific method for its determination. The aesthetic criterion of respecting morphological proportions constitutes for many authors a preferential reference guide. Determining the vertical occlusion dimension (DVO) remains a complex and imprecise step using several complementary methods. Exploitation of clues Facials seem a simple and promising means but a subject still to controversies. Material and method : We conducted a diagnostic study, spread over a period of one and a half years within the faculty of dentistry of Rabat. The facial indices studied were as follows: the inter-pupillary distance, the distance between the inner canthus and the labial commissure, the distance between the center of the pupil and the labial commissure, the internal canthus distance from the eyes × 2, the external canthus distance from the ear, the distance between external canthus and internal canthus (opposite eye), width of eyes × 2 and distance between external wing of nose and eyebrow. The measurements (DVO and different facial clues) were taken by the same operator directly on the toothed subjects, using a caliper.Results and discussion : On the 103 subjects, our sample presented a predominantly female with an average age of 21 years ± 3.9. The average vertical occlusion dimension was 50.49 mm ± 6.45. We noted a concordance between the DVO and two facial indices namely the internal canthus-labial commissure distance (51.16 mm ± 6.11) and the center of the pupil-labial commissure distance (52.18 mm ± 6.66). The reliability analysis was in favor of a positive, strong and very significant correlation between the DVO and the following measures: the inter-pupillary distance, the internal canthus distance-labial commissure and the center distance of the pupil-labial commissure (p <0.001). By adjusting the inter-pupillary distance, the internal canthus-labial commissure distance, the center distance of the pupil-labial commissure, the internal canthus distance from the eyes × 2, the external canthus-ear distance, the width of the eyes × 2, the distance between the external wing of the nose and the eyebrow, only the distance between the internal canthus and the labial commissure, the distance between the external canthus and the ear and the width of the eyes × 2 were explanatory variables for the DVO.Conclusion : The inter-pupillary distance, the internal canthus-labial commissance distance and the center distance of the pupil-labial commissure approximate the vertical dimension of occlusion in the dentate subject. The use of these facial indices seems interesting in complete removable prosthesis because of its simplicity and speed.


1981 ◽  
Vol 25 (3) ◽  
pp. 508-514
Author(s):  
Nobuhiro Munehisa ◽  
Koosai Koono ◽  
Tooru Nagasawa ◽  
Hiromichi Tsuru

Sign in / Sign up

Export Citation Format

Share Document