An improved in-situ bio-optical data set for ocean color algorithm development and satellite data product validation

2005 ◽  
Vol 98 (1) ◽  
pp. 122-140 ◽  
Author(s):  
P. Jeremy Werdell ◽  
Sean W. Bailey
2020 ◽  
Vol 12 (11) ◽  
pp. 1701
Author(s):  
Carlos Román-Cascón ◽  
Marie Lothon ◽  
Fabienne Lohou ◽  
Nitu Ojha ◽  
Olivier Merlin ◽  
...  

The use of soil moisture (SM) measurements from satellites has grown in recent years, fostering the development of new products at high resolution. This opens the possibility of using them for certain applications that were normally carried out using in situ data. We investigated this hypothesis through two main analyses using two high-resolution satellite-based soil moisture (SBSM) products that combined microwave with thermal and optical data: (1) The Disaggregation based on Physical And Theoretical scale Change (DISPATCH) and, (2) The Soil Moisture Ocean Salinity-Barcelona Expert Center (SMOS-BEC Level 4). We used these products to analyse the SM differences among pixels with contrasting vegetation. This was done through the comparison of the SM measurements from satellites and the measurements simulated with a simple antecedent precipitation index (API) model, which did not account for the surface characteristics. Subsequently, the deviation of the SM from satellite with respect to the API model (bias) was analysed and compared for contrasting land use categories. We hypothesised that the differences in the biases of the varied categories could provide information regarding the water retention capacity associated with each type of vegetation. From the satellite measurements, we determined how the SM depended on the tree cover, i.e., the denser the tree cover, the higher the SM. However, in winter periods with light rain events, the tree canopy could dampen the moistening of the soil through interception and conducted higher SM in the open areas. This evolution of the SM differences that depended on the characteristics of each season was observed both from satellite and from in situ measurements taken beneath a tree and in grass on the savanna landscape. The agreement between both types of measurements highlighted the potential of the SBSM products to investigate the SM of each type of vegetation. We found that the results were clearer for DISPATCH, whose data was not smoothed spatially as it was in SMOS-BEC. We also tested whether the relationships between SM and evapotranspiration could be investigated using satellite data. The answer to this question was also positive but required removing the unrealistic high-frequency SM oscillations from the satellite data using a low pass filter. This improved the performance scores of the products and the agreement with the results from the in situ data. These results demonstrated the possibility of using SM data from satellites to substitute ground measurements for the study of land–atmosphere interactions, which encourages efforts to improve the quality and resolution of these measurements.


2021 ◽  
Vol 13 (15) ◽  
pp. 3049
Author(s):  
Malgorzata Stramska ◽  
Marta Konik ◽  
Paulina Aniskiewicz ◽  
Jaromir Jakacki ◽  
Miroslaw Darecki

Among the most frequently used satellite data are surface chlorophyll concentration (Chl) and temperature (SST). These data can be degraded in some coastal areas, for example, in the Baltic Sea. Other popular sources of data are reanalysis models. Before satellite or model data can be used effectively, they should be extensively compared with in situ measurements. Herein, we present results of such comparisons. We used SST and Chl from model reanalysis and satellites, and in situ data measured at eight open Baltic Sea stations. The data cover time interval from 1 January 1998 to 31 December 2019, but some satellite data were not always available. Both the model and the satellite SST data had good agreement with in situ measurements. In contrast, satellite and model estimates of Chl concentrations presented large errors. Modeled Chl presented the lowest bias and the best correlation with in situ data from all Chl data sets evaluated. Chl estimates from a regionally tuned algorithm (SatBaltic) had smaller errors in comparison with other satellite data sets and good agreement with in situ data in summer. Statistics were not as good for the full data set. High uncertainties found in chlorophyll satellite algorithms for the Baltic Sea highlight the importance of continuous regional validation of such algorithms with in situ data.


2021 ◽  
Vol 8 ◽  
Author(s):  
Erick F. Geiger ◽  
Scott F. Heron ◽  
William J. Hernández ◽  
Jamie M. Caldwell ◽  
Kim Falinski ◽  
...  

Remotely sensed ocean color data are useful for monitoring water quality in coastal environments. However, moderate resolution (hundreds of meters to a few kilometers) satellite data are underutilized in these environments because of frequent data gaps from cloud cover and algorithm complexities in shallow waters. Aggregating satellite data over larger space and time scales is a common method to reduce data gaps and generate a more complete time series, but potentially smooths out the small-scale, episodic changes in water quality that can have ecological influences. By comparing aggregated satellite estimates of Kd(490) with related in-water measurements, we can understand the extent to which aggregation methods are viable for filling gaps while being able to characterize ecologically relevant water quality conditions. In this study, we tested a combination of six spatial and seven temporal scales for aggregating data from the VIIRS instrument at several coral reef locations in Maui, Hawai‘i and Puerto Rico and compared these with in situ measurements of Kd(490) and turbidity. In Maui, we found that the median value of a 5-pixels, 7-days spatiotemporal cube of satellite data yielded a robust result capable of differentiating observations across small space and time domains and had the best correlation among spatiotemporal cubes when compared with in situ Kd(490) across 11 nearshore sites (R2 = 0.84). We also found long-term averages (i.e., chronic condition) of VIIRS data using this aggregation method follow a similar spatial pattern to onshore turbidity measurements along the Maui coast over a three-year period. In Puerto Rico, we found that the median of a 13-pixels, 13-days spatiotemporal cube of satellite data yielded the best overall result with an R2 = 0.54 when compared with in situ Kd(490) measurements for one nearshore site with measurement dates spanning 2016–2019. As spatiotemporal cubes of different dimensions yielded optimum results in the two locations, we recommend local analysis of spatial and temporal optima when applying this technique elsewhere. The use of satellite data and in situ water quality measurements provide complementary information, each enhancing understanding of the issues affecting coastal ecosystems, including coral reefs, and the success of management efforts.


2011 ◽  
Vol 4 (5) ◽  
pp. 5935-6005 ◽  
Author(s):  
A. J. M. Piters ◽  
K. F. Boersma ◽  
M. Kroon ◽  
J. C. Hains ◽  
M. Van Roozendael ◽  
...  

Abstract. From June to July 2009 more than thirty different in-situ and remote sensing instruments from all over the world participated in the Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI). The campaign took place at KNMI's Cabauw Experimental Site for Atmospheric Research in the Netherlands. Its main objectives were to determine the accuracy of state-of-the-art ground-based measurement techniques for the detection of atmospheric nitrogen dioxide (both in-situ and remote sensing), and to investigate their usability in satellite data validation. The expected outcomes are recommendations regarding the operation and calibration of such instruments, retrieval settings, and observation strategies for the use in ground-based networks for air quality monitoring and satellite data validation. Twenty-four optical spectrometers participated in the campaign, of which twenty-one had the capability to scan different elevation angles consecutively, the so-called Multi-axis DOAS systems, thereby collecting vertical profile information, in particular for nitrogen dioxide and aerosol. Various in-situ samplers simultaneously characterized the variability of atmospheric trace gases and the physical properties of aerosol particles. A large data set of continuous measurements of these atmospheric constituents has been collected under various meteorological conditions and air pollution levels. Together with the permanent measurement capability at the Cabauw site characterizing the meteorological state of the atmosphere, the CINDI campaign provided a comprehensive observational data set of atmospheric constituents in a highly polluted region of the world during summertime. First detailed comparisons performed with the CINDI data show that slant column measurements of NO2, O4 and HCHO with MAX-DOAS agree within 5 to 15%, vertical profiles of NO2 derived from several independent instruments agree within 25%, and MAX-DOAS aerosol optical thickness agrees within 20–30% with AERONET data. For the in-situ NO2 instrument using a molybdenum converter, a bias was found as large as 5 ppbv during day time, when compared to the other in-situ instruments using photolytic converters.


2013 ◽  
Vol 7 ◽  
pp. 40-51 ◽  
Author(s):  
P. Jeremy Werdell ◽  
Christopher W. Proctor ◽  
Emmanuel Boss ◽  
Thomas Leeuw ◽  
Mustapha Ouhssain

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 3004
Author(s):  
Antonia Ivanda ◽  
Ljiljana Šerić ◽  
Marin Bugarić ◽  
Maja Braović

In this paper, we describe a method for the prediction of concentration of chlorophyll-a (Chl-a) from satellite data in the coastal waters of Kaštela Bay and the Brač Channel (our case study areas) in the Republic of Croatia. Chl-a is one of the parameters that indicates water quality and that can be measured by in situ measurements or approximated as an optical parameter with remote sensing. Remote sensing products for monitoring Chl-a are mostly based on the ocean and open sea monitoring and are not accurate for coastal waters. In this paper, we propose a method for remote sensing monitoring that is locally tailored to suit the focused area. This method is based on a data set constructed by merging Sentinel 2 Level-2A satellite data with in situ Chl-a measurements. We augmented the data set horizontally by transforming the original feature set, and vertically by adding synthesized zero measurements for locations without Chl-a. By transforming features, we were able to achieve a sophisticated model that predicts Chl-a from combinations of features representing transformed bands. Multiple Linear Regression equation was derived to calculate Chl-a concentration and evaluated quantitatively and qualitatively. Quantitative evaluation resulted in R2 scores 0.685 and 0.659 for train and test part of data set, respectively. A map of Chl-a of the case study area was generated with our model for the dates of the known incidents of algae blooms. The results that we obtained are discussed in this paper.


Author(s):  
B. Balaguru ◽  
S. S. Ramakrishnan ◽  
R. Vidhya ◽  
T. Thanabalan

The satellite oceanography reveals the rolls on Potential Fishing Zone (PFZ) advisories in India is limited by the availability of the satellite data during the cloudy days and for the cloudy areas, because of the inability of the passive sensors to pass through the clouds. However, there is a huge demand from the fishermen community to provide PFZ advisories on cloudy days / monsoon period also as the period corresponds to the peak fishing season. Keeping in view of the demand and availability of the optimally interpolated merged product from Altimetry, it is proposed to utilize 4 km SST product obtained from the AVHRR. In view of this, a comparative analysis has been carried out on the feasibility of utilization of the Altimetry product for identification of PFZ Advisories. The analysis is carried out the synergize study on existing in AVHRR SST product are really matching with the high resolution EKE and SSHA products derived from Altimetry. From the analysis it was found that the Altimetry product is suitable for identifying cold core generation of waters for PFZ advisories with certain limitations. Also persistence of the ocean color environmental variables is cross-verified with catch weight observed from In-situ observation. The overall analysis derived from ocean color and altimetry products for delineating potential fishing zones enhance flawless information for future research.


Sign in / Sign up

Export Citation Format

Share Document