Algal cells harvesting using cost-effective magnetic nano-particles

2020 ◽  
Vol 720 ◽  
pp. 137621 ◽  
Author(s):  
Fares Almomani
2001 ◽  
Vol 32 ◽  
pp. 385-386
Author(s):  
TH. KAUFFELDT ◽  
E. KAUFFELDT ◽  
T. ZARUTSKAYA ◽  
M. SHAPIRO ◽  
A. SCHMIDT-OTT

2016 ◽  
Vol 513 ◽  
pp. 68-76 ◽  
Author(s):  
H. Rahnama ◽  
A. Sattarzadeh ◽  
F. Kazemi ◽  
N. Ahmadi ◽  
F. Sanjarian ◽  
...  

2012 ◽  
Vol 501 ◽  
pp. 309-313 ◽  
Author(s):  
Siti Nurdalila Abd-Ghani ◽  
Roslan Abd-Shukor ◽  
Wei Kong

The effects of nano particles Fe3O4 addition on the superconducting and transport properties of YBa2Cu3O7-δ (YBCO) were studied. YBa2Cu3O7-δ superconductor powders were prepared by using high purity oxide powders via solid state reaction method. Nano Fe3O4 with 0.01 – 0.05 wt.% with average size 28 nm was added into YBCO. The transition temperatures (Tc) of the samples were measured by using four point probe method. The critical current (Ic) of the samples has been determined by using the 1 μV/cm criterion from 30 – 77 K. Sample with 0.02 wt.% nano Fe3O4 showed the highest Tc at 87 K. It is interesting to note the same sample also exhibited the highest Jc at 77 K up to 1683 mA/cm2. Nano Fe3O4 has acted as effective flux pinning centers in YBCO. A small amount of nano particles Fe3O4 addition has successfully improved the superconducting and transport properties of YBCO. The excessive addition of nano Fe3O4 (> 0.02 wt.%) suppressed the Tc and Jc. Overall, Jc decreases with increasing temperature (30 – 77 K) as a consequence of thermally activated flux creep. Magnetic impurities normally suppress superconductivity. However, by adding magnetic nano particles, current carrying capacity of superconductors YBCO was enhanced significantly.


2021 ◽  
Author(s):  
Sunil T. Galatage ◽  
Aditya S. Hebalkar ◽  
Shradhey V. Dhobale ◽  
Omkar R. Mali ◽  
Pranav S. Kumbhar ◽  
...  

Nanotechnology is an expanding area of research where we use to deal with the materials in Nano-dimension. The conventional procedures for synthesizing metal nanoparticles need to sophisticated and costly instruments or high-priced chemicals. Moreover, the techniques may not be environmentally safe. Therefore “green” technologies for synthesis of nanoparticles are always preferred which is simple, convenient, eco-friendly and cost effective. Green synthesis of nanoparticle is a novel way to synthesis nanoparticles by using biological sources. It is gaining attention due to its cost effective, ecofriendly and large scale production possibilities. Silver nanoparticles (AgNPs) are one of the most vital and fascinating nanomaterials among several metallic nanoparticles that are involved in biomedical applications. It has vital importance in nanoscience and naomedicines to treat and prevent vital disease in human beings especially in cancer treatment. In current work we discussed different methods for synthesis of AgNPs like biological, chemical and physical along with its characterization. We have also discussed vital importance of AgNPs to cure life threatnign diseases like cancer along with antidiabetic, antifungal, antiviral and antimicrobial alog with its molecular mode of action etc. Finally we conclude by discussing future prospects and possible applications of silver nano particles.


2012 ◽  
Vol 248 ◽  
pp. 594-598
Author(s):  
Gang Zhao ◽  
Hai Rong Cui ◽  
Qiu Li Ding ◽  
Xu Feng Wang ◽  
Shi Xi Tian ◽  
...  

Series ferrofluid based sensors are novel sensors which use ferrofluid as inductive core to measure signals. The physical properties of ferrofluid affect mostly on performance parameter of these series sensors. There is several generality regularity for ferrofluid appliedd in series sensors. This paper analyses the generality of parameter controlling for properties of ferrofluid used in series ferrofluid sensors. The working area of magnetization curve of ferrofluid used in series sensors should be in its linear area where the permeability of ferrofluid is considered as a constant. The magnetic nano-particles generally obtained by reaction of ferrous chloride and ferric chloride. With the increment of viscosity and density of ferrofluid, the saturation magnetic intensity of ferrofluid increases. The concentration of reacted solution is better to be 0.6mol/L. Saturation magnet intensity of magnetic nano-partcles is highest as the molar ratio of trivalent iron ion to bivalent iron ion is equal to 1.75. The reacted temperature is better between 65~80°C while PH value of solution is in a weak alkaline state.


2011 ◽  
Vol 21 (3) ◽  
pp. 2250-2253 ◽  
Author(s):  
W. K. Tseng ◽  
J. J. Chieh ◽  
S. Y. Yang ◽  
H. E. Horng ◽  
C. Y. Hong ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document