A novel effective nonlinear state observer based robust nonlinear sliding mode controller for a 6 kW Proton Exchange Membrane Fuel Cell voltage regulation

2021 ◽  
Vol 44 ◽  
pp. 100996
Author(s):  
Ali Dali ◽  
Samir Abdelmalek ◽  
Azzeddine Bakdi ◽  
Maamar Bettayeb
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Cell Voltage ◽  
Voltage Regulation ◽  
State Observer ◽  
Proton Exchange ◽  
Sliding Mode Controller ◽  
Exchange Membrane ◽  
Nonlinear State

Performance Comparison of Three Different Controllers of Proton Exchange Membrane Fuel Cell

2015 ◽  
Vol 8 (1) ◽  
pp. 115-122
Author(s):  
Liping Fan ◽  
Chong Li ◽  
Kosta Boshnakov
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Sliding Mode Controller ◽  
Adaptive Fuzzy ◽  
Adaptive Fuzzy Sliding Mode ◽  
Fuzzy Sliding Mode ◽  
Exchange Membrane

Proton exchange membrane fuel cells (PEMFCs) are promising clear and efficient new energy sources. An excellent control system is a normal working prerequisite for maintaining a fuel cell system in correct operating conditions. Conventional controllers could not satisfy the high performance to obtain the acceptable responses because of uncertainty, time-change, nonlinear, long-hysteresis and strong-coupling characteristics of PEMFCs. Based on the dynamic model of PEMFC, an adaptive fuzzy sliding mode controller is proposed for PEMFC to realize constant voltage output and reliability service. Three different controllers, including fuzzy controller, fuzzy sliding mode controller and adaptive fuzzy sliding mode controller, are designed and compared. Simulation results show that the proposed adaptive fuzzy sliding mode controller for PEMFC can get satisfactory controlling effects.

scholarly journals Design of Incremental Conductance Sliding Mode MPPT Control Applied by Integrated Photovoltaic and Proton Exchange Membrane Fuel Cell System under Various Operating Conditions for BLDC Motor

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Jehun Hahm ◽  
Hyoseok Kang ◽  
Jaeho Baek ◽  
Heejin Lee ◽  
Mignon Park
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Proton Exchange ◽  
Operating Conditions ◽  
System Control ◽  
Atmospheric Conditions ◽  
Pv Array ◽  
Incremental Conductance ◽  
Exchange Membrane

This paper proposes an integrated photovoltaic (PV) and proton exchange membrane fuel cell (PEMFC) system for continuous energy harvesting under various operating conditions for use with a brushless DC motor. The proposed scheme is based on the incremental conductance (IncCond) algorithm combined with the sliding mode technique. Under changing atmospheric conditions, the energy conversion efficiency of a PV array is very low, leading to significant power losses. Consequently, increasing efficiency by means of maximum power point tracking (MPPT) is particularly important. To manage such a hybrid system, control strategies need to be established to achieve the aim of the distributed system. Firstly, a Matlab/Simulink based model of the PV and PEMFC is developed and validated, as well as the incremental conductance sliding (ICS) MPPT technique; then, different MPPT algorithms are employed to control the PV array under nonuniform temperature and insolation conditions, to study these algorithms effectiveness under various operating conditions. Conventional techniques are easy to implement but produce oscillations at MPP. Compared to these techniques, the proposed technique is more efficient; it produces less oscillation at MPP in the steady state and provides more precise tracking.

scholarly journals Open-Source Dynamic Matlab/Simulink 1D Proton Exchange Membrane Fuel Cell Model

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3478 ◽  
Author(s):  
Arne L. Lazar ◽  
Swantje C. Konradt ◽  
Hermann Rottengruber
Keyword(s):  
Fuel Cell ◽  
Open Source ◽  
Real Time ◽  
Proton Exchange Membrane ◽  
Cell Model ◽  
Cell Voltage ◽  
Proton Exchange ◽  
Cell Parameters ◽  
Real Time Analysis ◽  
Exchange Membrane

This work presents an open-source, dynamic, 1D, proton exchange membrane fuel cell model suitable for real-time applications. It estimates the cell voltage based on activation, ohmic and concentration overpotentials and considers water transport through the membrane by means of osmosis, diffusion and hydraulic permeation. Simplified equations reduce the computational load to make it viable for real-time analysis, quick parameter studies and usage in complex systems like complete vehicle models. Two modes of operation for use with or without reference polarization curves allow for a flexible application even without information about cell parameters. The program code is written in MATLAB and provided under the terms and conditions of the Creative Commons Attribution License (CC BY). It is designed to be used inside of a Simulink model, which allows this fuel cell model to be used in a wide variety of 1D simulation platforms by exporting the code as C/C++.

Improvement of CO Tolerance of Proton Exchange Membrane Fuel Cell (PEMFC) by an Air-Bleeding Technique

2005 ◽  
Author(s):  
Chen-Chung Chung ◽  
Chiun-Hsun Chen ◽  
Hsiang-Hui Lin ◽  
Yi-Yie Yan
Keyword(s):  
Carbon Monoxide ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cell Voltage ◽  
Significant Loss ◽  
Proton Exchange ◽  
Co Poisoning ◽  
Fuel Gas ◽  
Co Tolerance ◽  
Exchange Membrane

The investigation studies improving PEMFC carbon monoxide by a periodic air dosing. The carbon monoxide in the fuel gas leads to a significant loss in power density due to CO poisoning in the anode. The method involves bleeding air into the anode fuel stream (H2-CO), which contains CO in various concentrations (20, 52.7, 100 ppm). In the transient CO poisoning test, air-bleeding is performed for four different periodic air dosing and cell voltage is fixed at 0.6 V. The result of a dosing of air during 10 sec in intervals of 10 sec is similar to that of continuous air-bleeding except 100 ppm CO. The CO tolerance of the fuel cell and cell performance recovery from poisoning can be improved by air-bleeding.

T-S Fuzzy Model-Based Fault Diagnosis of PEM Fuel Cell Engine

2010 ◽  
Vol 34-35 ◽  
pp. 92-97
Author(s):  
Rui Quan ◽  
Shu Hai Quan ◽  
Liang Huang
Keyword(s):  
Fuel Cell ◽  
Fault Diagnosis ◽  
Proton Exchange Membrane ◽  
Fuzzy Model ◽  
Cell Voltage ◽  
Proton Exchange ◽  
Safety And Reliability ◽  
Group A ◽  
On Line ◽  
Exchange Membrane

Proton exchange membrane fuel cell(PEMFC) technology has been greatly promoted in recent years, but the fault diagnosis and predictive maintenance are unneglectable issues in practical work. According to the safety and reliability requirement of 60kW automotive fuel cell engine designed by our group, a fault diagnosis method based on T-S fuzzy model which is tuned and optimized thanks to particle swarm optimization is put forward in this paper. Its inputs include voltage, the lowest single cell voltage, current, temperature and air pressure, by setting the output threshold of T-S fuzzy model at 0.85,when the healthy degree and its variety rate are below 0.85 and 0.05 respectively, the flooding fault is distinguished, if the healthy degree is below 0.85 but its variety rate is above 0.05,drying of the proton membrane is on-line diagnosed successfully, which can provide a guidance to its real-time monitoring and optimized control in future.

The Effects of Feeding Configurations to Water Flooding and General Performance of a Proton Exchange Membrane Fuel Cell

2005 ◽  
Author(s):  
A. B. Mahmud Hasan ◽  
S. M. Guo ◽  
S. V. Ekkad
Keyword(s):  
Fuel Cell ◽  
Power Density ◽  
Current Density ◽  
Proton Exchange Membrane ◽  
Cell Voltage ◽  
Bipolar Plate ◽  
Proton Exchange ◽  
Water Flooding ◽  
Cathode Side ◽  
Exchange Membrane

The performance of a Proton Exchange Membrane Fuel Cell (PEMFC) using different feeding configurations has been studied. Three bipolar plates, namely serpentine, straight channel and interdigitated designs, were arranged in different combinations for the PEMFC anode and cathode sides. Nine combinations in total were tested under different flow rates, working temperatures and loadings. The cell voltage versus current density and the cell power density versus current density curves were obtained. After operating the PEMFC under high current densities, the cell was split and the water flooding in the feeding channels was visually inspected. Experimental results showed that for different feeding configurations, interdigitated bipolar plate in anode side and serpentine bipolar plate in cathode side had the best performance in terms of cell voltage-current density curve, power density output rate, percentage of flooded area in the feeding channels, the pattern of flooding and the fuel utilization rate.

Sign in / Sign up

Export Citation Format

Share Document