scholarly journals Sliding wear of medium-carbon bainitic/martensitic/austenitic steel treated by short-term low-temperature austempering

Wear ◽  
2021 ◽  
pp. 203732
Author(s):  
Quanshun Luo ◽  
Jianbin Li ◽  
Qintai Yan ◽  
Wenbo Li ◽  
Yubi Gao ◽  
...  
Alloy Digest ◽  
1982 ◽  
Vol 31 (1) ◽  

Abstract AISI Type P20 is a chromium-molybdenum tool steel of medium carbon content. It usually is supplied in the prehardened condition (about 300 Brinell) so that the cavity can be machined and the mold or die placed directly in service; however, for some uses further treatments are employed. It is produced to high-quality tool-steel standards to permit a high luster to be achieved on the surface of the polished die cavity. P20 is used for molds for plastics and for die-casting dies for zinc and other low-temperature casting alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-393. Producer or source: Tool steel mills.


2016 ◽  
Author(s):  
Kayla M. Miller ◽  
◽  
Andrew S. Elwood Madden ◽  
Janice L. Bishop ◽  
Charity Phillips-Lander ◽  
...  
Keyword(s):  

2021 ◽  
Vol 141 ◽  
pp. 110824
Author(s):  
Yongliang Shen ◽  
Shuli Liu ◽  
Abdur Rehman Mazhar ◽  
Xiaojing Han ◽  
Liu Yang ◽  
...  

Vacuum ◽  
2005 ◽  
Vol 78 (2-4) ◽  
pp. 389-394 ◽  
Author(s):  
J. Baranowska ◽  
E. Kusior ◽  
V. Amigo ◽  
K. Szczeciński

Insects ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 609
Author(s):  
Jianghua Liao ◽  
Juan Liu ◽  
Zhijian Guan ◽  
Chao Li

The Colorado potato beetle is a serious pest of Solanaceae in China. In early summer, cold spells in later spring may occur for brief periods in the field environmental conditions, and temperatures often deviate far below the normal temperature for short periods, such as sudden short-term low temperature, may affect the development of Colorado potato beetle eggs. This paper studies the effects of low temperature stress at 8 °C for 0 d, 1 d, 3 d, 5 d, 7 d, and 10 d on the development of Colorado potato beetle eggs. Our results show that egg survival is significantly affected by short-term low temperature exposure. The percentage of eggs hatched is significantly affected by different treatment times (p = 0.000)—the percentage of eggs hatched decreases with increased treatment time, and Colorado potato beetles will extend the wintering time of their soil to resist the effects of lower temperatures. Thus, exposure of Colorado potato beetles to a short-term low temperature affects their emergence and population growth; this study could provide information for the occurrence, monitoring, and early warning of Colorado potato beetle during short-term temperature.


Author(s):  
Zhurinov M.Zh., ◽  
◽  
Teltayev B.B., ◽  
Kalybay A.A., ◽  
Rossi C.O., ◽  
...  

A comparative analysis of the low temperature resistance for a nanocarbon bitumen and other 30 neat and modified bitumens has been performed in the work. The stiffness at the temperatures of -24°С, -30°С and -36°С under technical system Superpave has been accepted as an indicator of low temperature resistance of the bitumens. The stiffness of the bitumens has been determined on a bending beam rheometer (standard ASTM D 6648-08). Before testing the bitumens have been subjected to the double artificial aging: short-term aging – under standard AASHTO Т 240-13 and long-term aging – under standard ASTM D 6521-08. The nanocarbon bitumen has been prepared in the laboratory of the Kazakhstan Highway Research Institute (KazdorNII) with the use of a road bitumen of the grade BND 70/100 produced by the Pavlodar petrochemical plant (PNHZ) and a nanocarbon powder (2% by weight) manufactured from a coal rock of the deposit “Saryadyr” “Corporation “ON-Olzha” LLP, Akmola region, Kazakhstan). The nanocarbon powder (150-200 nm) has been manufactured by three-stage size reduction of the coal rock: I – a mechanical dispergator (up to 2-3 mm), II – an aerodynamic mill (up to 20 mcm), III – a reactor with a rotating electromagnetic field. The neat bitumens of the grades BND 50/70, BND 70/100, BND 100/130 have been produced by the plants of Kazakhstan and Russia; they satisfy the requirements of the standard ST RK 1373-2013. The modified bitumens have been prepared in the laboratory of KazdorNII with the use of the neat bitumens, 7 types of the polymers, crumb rubber and polyphosphoric acid and they satisfy the requirements of the standard ST RK 2534-2014. It has been determined that the nanocarbon bitumen is one of the most resistant at the low temperatures: -24°С, -30°С and -36°С.


Sign in / Sign up

Export Citation Format

Share Document