Environmental monitoring of trace elements in bark of Scots pine by thick-target PIXE

In the article we studied chemical elements in the hair of children as a form of environmental monitoring of metals in a given area, since one of the objective indicators of the ecological and hygienic well-being of a territory is the status of trace elements as the most sensitive part of the population, especially children. Many foreign scientific studies have shown that a hair sample is a good indicator of a negative technogenic impact on humans, and it is known that the unfavorable state of children characterizes the ecogeochemical features of the area, so we took into account the accumulation of trace elements in the hair. The study showed an increase in lead and cadmium and a decrease in zinc, copper and chromium.

Download Full-text

Trace elements in fruiting bodies of ectomycorrhizal fungi growing in Scots pine (Pinus sylvestris L.) stands in Poland

The Science of The Total Environment ◽

10.1016/j.scitotenv.2004.08.002 ◽

2005 ◽

Vol 339 (1-3) ◽

pp. 103-115 ◽

Cited By ~ 37

Author(s):

Maria Rudawska ◽

Tomasz Leski

Keyword(s):

Trace Elements ◽

Pinus Sylvestris ◽

Scots Pine ◽

Ectomycorrhizal Fungi ◽

Fruiting Bodies

Download Full-text

Microanalytical Identification of a New Zr-Nb-Fe Phase

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100134259 ◽

1990 ◽

Vol 48 (2) ◽

pp. 132-133

Author(s):

O.T. Woo ◽

G.J.C. Carpenter

Keyword(s):

Trace Elements ◽

Cold Rolling ◽

Proportionality Factor ◽

Tube Material ◽

X Ray ◽

Metal Foils ◽

Arc Melting ◽

Intermetallic Particles ◽

Intermetallic Precipitates ◽

Cold Worked

To study the influence of trace elements on the corrosion and hydrogen ingress in Zr-2.5 Nb pressure tube material, buttons of this alloy containing up to 0.83 at% Fe were made by arc-melting. The buttons were then annealed at 973 K for three days, furnace cooled, followed by ≈80% cold-rolling. The microstructure of cold-worked Zr-2.5 at% Nb-0.83 at% Fe (Fig. 1) contained both β-Zr and intermetallic precipitates in the α-Zr grains. The particles were 0.1 to 0.7 μm in size, with shapes ranging from spherical to ellipsoidal and often contained faults. β-Zr appeared either roughly spherical or as irregular elongated patches, often extending to several micrometres.The composition of the intermetallic particles seen in Fig. 1 was determined using Van Cappellen’s extrapolation technique for energy dispersive X-ray analysis of thin metal foils. The method was employed to avoid corrections for absorption and fluorescence via the Cliff-Lorimer equation: CA/CB = kAB · IA/IB, where CA and CB are the concentrations by weight of the elements A and B, and IA and IB are the X-ray intensities; kAB is a proportionality factor.

Download Full-text

XRMF applications of a monolithic, polycapillary, focusing x-ray optic

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100163666 ◽

1996 ◽

Vol 54 ◽

pp. 240-241

Author(s):

D. A. Carpenter ◽

Ning Gao ◽

G. J. Havrilla

Keyword(s):

Trace Elements ◽

Point Source ◽

Focal Spot ◽

Fluorescence Analysis ◽

X Rays ◽

Focal Distance ◽

Spot Diameter ◽

X Ray ◽

Focal Spot Diameter

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.

Download Full-text

Trace Elements and Iron in Human Metabolism

Biochemical Society Transactions ◽

10.1042/bst0071330a ◽

1979 ◽

Vol 7 (6) ◽

pp. 1330-1331

Author(s):

E. D. WILLS

Keyword(s):

Trace Elements ◽

Human Metabolism

Download Full-text