In-built filter cartridge for contaminants

World Pumps ◽  
2021 ◽  
Vol 2021 (4) ◽  
pp. 6
Keyword(s):  
Author(s):  
Shaowen Chen ◽  
Yun Gong

Patchy cleaning is one of the principal factors resulting in the reduction of the efficiency and quality of reverse pulse-jet cleaning as well as the service lifetime of filtration units. To resolve the above issues, a new pleated cartridge shape was introduced in this study to improve the cleaning efficiency and quality of pleated filter cartridges. To calculate the transient flow and pressure fields for a simple filtration system with one filter cartridge in the reverse pulse-jet cleaning process, an unsteady computational fluid dynamics model was developed via the commercial computational fluid dynamics software of ANSYS CFX. The transient static pressure fields for filter cartridges under four different pleated cartridge shapes were studied. The conventional cylindrical cartridge was selected as the base-model of filter cartridge and contrasted with other three cartridge shapes. It was found that the convergent–divergent cartridge was able to effectively improve the cleaning performance without the increase of tank pressure. Different pleated cartridge shapes are expected to be able to redistribute the pressure drop across the porous media along the filter height and to improve the flow behavior after pulsing gas releasing from the nozzle. For convergent–divergent cartridge shape, the peak pressure on the inner surface of porous media has an obvious increase and the peak pressure arriving time is earlier than other cases. It shows that the reverse flow has much more competence to remove the dust powder or cake from the porous media. At the same time, the area-averaged pressure drop at the bottom section of the filter has an increase of 50% under the cartridge with a convergent–divergent shape compared to that with a cylindrical shape. It is considered to enhance the cleaning mechanical stress at the bottom section of the filter cartridge. The better cleaning performance was observed in the medium, with 150% increase compared to that with a cylindrical shape. Furthermore, the cleaning performance gets improved because the value enhances on the top section. The redistribution of pressure drop observed is mainly because the special geometric construction of pleated cartridges compresses the flow on the medium and produce higher pressure drop there. Further studies indicate that the improved cleaning performance was observable under the consideration of the tank pressure reduction and variation of media permeability during each cleaning phase, and the change of pleated cartridge shapes can also improve the cleaning performance when combined with other improvement methods.


2014 ◽  
Vol 9 (2) ◽  
pp. 155892501400900 ◽  
Author(s):  
Pragnya Sanjiv Kanade ◽  
Someshwar S. Bhattacharya

There are number of winding machines in the market based on either the Random, Precision, or Step Precision winding system. Filtration application requires a uniform lay of yarn or its performance may be affected, hence, for the aforesaid purpose, the precision system would be more apt. Recent trends show an increased use of electronics in all applications, textiles being no exception. The aim of the present work was to develop a filter cartridge winder (laboratory model) based on the precision winding system, controlled electronically. The novelty of this machine lies in the fact that it makes use of a chain to reciprocate the guide mounted on it, unlike the majority of commercial filter winders, which make use of scroll cams to traverse the yarn. Filter winders are specialized winders that produce cartridges in standard sizes of 10”, 20”, 30″ and up to 70”. Thus a cartridge winder is quite different from the usual winding machines not only in terms of its traverse length and feed material but also because of the core tube which has to be perforated just as one required for a dyeing process.


Author(s):  
Xiangfei You ◽  
Kang Chen ◽  
Jiansheng Xing ◽  
Haida Shen ◽  
Lei Meng ◽  
...  

Based on the brief introduction of AP1000 Nuclear Power Project high & low pressure filter and filter cartridge location information, and through researching and analyzing the whole operation process of taking out spent filter cartridge from filter vessel, transferring the spent filter cartridge to spent filter storage area and installing new filter cartridge, the reasonable and feasible filter cartridge replacement and transport operation process was proposed. And based on the proposed operation process, the related equipments design of filter cartridge replacement and transport were optimized. Reasonable and feasible operation process combining with perfectly shielding related equipments can maximally reduce radioactive occupational exposure risk to operating personnel and effectively prevent operating equipments and the ambient environment from radioactive pollution. During filter cartridge replacement and transport, the maximum radiation dose rate at operating position (cared position) was reduced to 0.830mSv/h by radiation shielding calculation. Meanwhile, the research content of this paper can also provide technical reference for nuclear power plant operators to actually operate filter cartridge replacement and transport. This paper also proposed the improving suggestion for follow-up projects on the basis of Self-Reliance Supporting Project existing problems on filter cartridge replacement and transport, and briefly summarized the innovation and application value of this paper.


1997 ◽  
Vol 83 (6) ◽  
pp. 1976-1985 ◽  
Author(s):  
Joseph W. Klaesner ◽  
N. Adrienne Pou ◽  
Richard E. Parker ◽  
Charlene Finney ◽  
Robert J. Roselli

Klaesner, Joseph W., N. Adrienne Pou, Richard E. Parker, Charlene Finney, and Robert J. Roselli. Optical measurement of isolated canine lung filtration coefficients at normal hematocrits. J. Appl. Physiol. 83(6): 1976–1985, 1997.—In this study, lung filtration coefficient ( K fc) values were measured in eight isolated canine lung preparations at normal hematocrit values using three methods: gravimetric, blood-corrected gravimetric, and optical. The lungs were kept in zone 3 conditions and subjected to an average venous pressure increase of 10.24 ± 0.27 (SE) cmH2O. The resulting K fc(ml ⋅ min−1 ⋅ cmH2O−1 ⋅ 100 g dry lung wt−1) measured with the gravimetric technique was 0.420 ± 0.017, which was statistically different from the K fc measured by the blood-corrected gravimetric method (0.273 ± 0.018) or the product of the reflection coefficient (ςf) and K fc measured optically (0.272 ± 0.018). The optical method involved the use of a Cellco filter cartridge to separate red blood cells from plasma, which allowed measurement of the concentration of the tracer in plasma at normal hematocrits (34 ± 1.5). The permeability-surface area product was measured using radioactive multiple indicator-dilution methods before, during, and after venous pressure elevations. Results showed that the surface area of the lung did not change significantly during the measurement of K fc. These studies suggest that ςf K fccan be measured optically at normal hematocrits, that this measurement is not influenced by blood volume changes that occur during the measurement, and that the optical ςf K fcagrees with the K fc obtained via the blood-corrected gravimetric method.


2018 ◽  
Vol 19 (1) ◽  
pp. 336-345 ◽  
Author(s):  
Justin D. Chaffin ◽  
Erica L. Fox ◽  
Callie A. Nauman ◽  
Kristen N. Slodysko

Abstract Toxic cyanobacterial blooms are a global threat to human health due to contamination of drinking water. To ensure public safety, water treatment plants must have the capability to remove cyanotoxins from water. Recently, however, there have been several instances when microcystins, a common group of cyanotoxins, have been detected in tap water. This research investigated if commercially available pitcher-style water purifiers were able to remove microcystins from water. Microcystins were extracted from two naturally occurring blooms in Lake Erie, diluted to initial concentrations ranging from 1 to 5 μg/L, and then subjected to three purifier types. Results showed that the purifier with the fastest percolation rate (126 seconds/L) and a filter cartridge comprised solely of coconut-based activated carbon removed 50% or less of the microcystins, while the purifier with the slowest percolation rate (374 seconds/L) and a blend of activated carbon decreased microcystins to below detectable levels (<0.10 μg/L) in all experiments. Thus, pitcher-style purifiers with slow percolation rates and composed of a blend of active carbon can provide an additional layer of protection against microcystins; however, it is recommended that consumers switch water sources when cyanotoxins are confirmed to be in tap water.


2016 ◽  
Vol 170 ◽  
pp. 146-154 ◽  
Author(s):  
Zhen Liu ◽  
Zhongli Ji ◽  
Xiaolin Wu ◽  
Hui Ma ◽  
Fengting Zhao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document