Production of hydrogen from sodium borohydride in alkaline solution: development of catalyst with high performance

2004 ◽  
Vol 29 (3) ◽  
pp. 263-267 ◽  
Author(s):  
J Kim
2008 ◽  
Vol 33 (1) ◽  
pp. 51-56 ◽  
Author(s):  
A POZIO ◽  
M DEFRANCESCO ◽  
G MONTELEONE ◽  
R ORONZIO ◽  
S GALLI ◽  
...  

Author(s):  
Yoo Sei Park ◽  
Jooyoung Lee ◽  
Myeong-Je Jang ◽  
Juchan Yang ◽  
Jae Hoon Jeong ◽  
...  

Seawater electrolysis is a promising technology for the production of hydrogen energy and seawater desalination. To produce hydrogen energy through seawater electrolysis, highly active electrocatalysts for the oxygen evolution reaction...


Author(s):  
Chen Yang ◽  
Zhonghua Cheng ◽  
Giorgio Divitini ◽  
Cheng Qian ◽  
Bo Hou ◽  
...  

The fabrication of single atomic photocatalysts via a simple pathway is a crucial challenge to enable efficient production of hydrogen. Herein, we demonstrate a gaseous diffusion strategy to construct single...


2020 ◽  
Vol 20 (8) ◽  
pp. 5175-5181 ◽  
Author(s):  
Ruiqing Li ◽  
Chenyang Xu ◽  
Xiangfen Jiang ◽  
Yoshio Bando ◽  
Xuebin Wang

Developing high-performance nonprecious electrocatalysts for oxygen evolution reaction (OER) is of great importance, but it remains a challenge. In this paper, we synthesize a porous monolithic catalytic electrode, which is transition metal nitride, Ni3FeN, constructed on a 3D network-like support of the strutted graphene foam (Ni3FeN/SG). The obtained Ni3FeN/SG electrode shows the excellent catalytic activity and the durability for OER in alkaline solution, owing to iron incorporation, high electrical conductivity and 3D network-like structure of strutted graphene. It requires small overpotential (226 mV) to actuate 10 mA cm−2, superior to most recently developed catalysts and commercial RuO2. The fabrication strategy provides a substantial way to expand 3D porous monolithic electrodes for various electrocatalytic applications.


2015 ◽  
Vol 183 ◽  
pp. 197-215 ◽  
Author(s):  
Nora Meiri ◽  
Yakov Dinburg ◽  
Meital Amoyal ◽  
Viatcheslav Koukouliev ◽  
Roxana Vidruk Nehemya ◽  
...  

Carbon dioxide and water are renewable and the most abundant feedstocks for the production of chemicals and fungible fuels. However, the current technologies for production of hydrogen from water are not competitive. Therefore, reacting carbon dioxide with hydrogen is not economically viable in the near future. Other alternatives include natural gas, biogas or biomass for the production of carbon dioxide, hydrogen and carbon monoxide mixtures that react to yield chemicals and fungible fuels. The latter process requires a high performance catalyst that enhances the reverse water-gas-shift (RWGS) reaction and Fischer–Tropsch synthesis (FTS) to higher hydrocarbons combined with an optimal reactor system. Important aspects of a novel catalyst, based on a Fe spinel and three-reactor system developed for this purpose published in our recent paper and patent, were investigated in this study. Potassium was found to be a key promoter that improves the reaction rates of the RWGS and FTS and increases the selectivity of higher hydrocarbons while producing mostly olefins. It changed the texture of the catalyst, stabilized the Fe–Al–O spinel, thus preventing decomposition into Fe3O4 and Al2O3. Potassium also increased the content of Fe5C2 while shifting Fe in the oxide and carbide phases to a more reduced state. In addition, it increased the relative exposure of carbide iron on the catalysts surface, the CO2 adsorption and the adsorption strength. A detailed kinetic model of the RWGS, FTS and methanation reactions was developed for the Fe spinel catalyst based on extensive experimental data measured over a range of operating conditions. Significant oligomerization activity of the catalyst was found. Testing the pelletized catalyst with CO2, CO and H2 mixtures over a range of operating conditions demonstrated its high productivity to higher hydrocarbons. The composition of the liquid (C5+) was found to be a function of the potassium content and the composition of the feedstock.


2019 ◽  
Vol 30 ◽  
pp. 101-107 ◽  
Author(s):  
Qing Jia ◽  
Chunlin Yu ◽  
Wei Liu ◽  
Guokui Zheng ◽  
Chaojun Lei ◽  
...  

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 912
Author(s):  
Duong Nguyen Nguyen ◽  
Uk Sim ◽  
Jung Kyu Kim

Hydrogen-evolution reaction (HER) is a promising technology for renewable energy conversion and storage. Electrochemical HER can provide a cost-effective method for the clean production of hydrogen. In this study, a biomimetic eco-friendly approach to fabricate nitrogen-doped carbon nanosheets, exhibiting a high HER performance, and using a carbonized polydopamine (C-PDA), is described. As a biopolymer, polydopamine (PDA) exhibits high biocompatibility and can be easily obtained by an environmentally benign green synthesis with dopamine. Inspired by the polymerization of dopamine, we have devised the facile synthesis of nitrogen-doped nanocarbons using a carbonized polydopamine for the HER in acidic media. The N-doped nanocarbons exhibit excellent performance for H2 generation. The required overpotential at 5 mA/cm2 is 130 mV, and the Tafel slope is 45 mV/decade. Experimental characterizations confirm that the excellent performance of the N-doped nanocarbons can be attributed to the multisite nitrogen doping, while theoretical computations indicate the promotion effect of tertiary/aromatic nitrogen doping in enhancing the spin density of the doped samples and consequently in forming highly electroactive sites for HER applications.


2001 ◽  
Vol 18 (6) ◽  
pp. 894-897 ◽  
Author(s):  
Sang Gi Lee ◽  
Jae-Hyun Kim ◽  
Sangwha Lee ◽  
Ho-In Lee

2015 ◽  
Vol 3 (45) ◽  
pp. 22960-22968 ◽  
Author(s):  
Amutha Chinnappan ◽  
Wook-Jin Chung ◽  
Hern Kim

This work focuses on hydrogen (H2) generation from the hydrolysis of sodium borohydride (NaBH4) by using high performance microporous polymeric ionic liquid membranes.


Sign in / Sign up

Export Citation Format

Share Document