Precisely controlling the density of water filtration membranes increases their efficiency, shows research

2021 ◽  
Vol 2021 (8) ◽  
pp. 5-6
Author(s):  
Simon Atkinson
Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1752
Author(s):  
Blanca Jalvo ◽  
Andrea Aguilar-Sanchez ◽  
Maria-Ximena Ruiz-Caldas ◽  
Aji P. Mathew

This article presents a comparative study of the surface characteristics and water purification performance of commercially available cellulose nonwoven fabrics modified, via cast coating, with different nano-dimensioned bio-based carbohydrate polymers, viz. cellulose nanocrystals (CNC), TEMPO-oxidized cellulose nanofibers (T-CNF), and chitin nanocrystals (ChNC). The surface-modified nonwoven fabrics showed an improvement in wettability, surface charge modification, and a slight decrease of maximum pore size. The modification improved the water permeance in most of the cases, enhanced the particle separation performance in a wide range of sizes, upgraded the mechanical properties in dry conditions, and showed abiotic antifouling capability against proteins. In addition, T-CNF and ChNC coatings proved to be harmful to the bacteria colonizing on the membranes. This simple surface impregnation approach based on green nanotechnology resulted in highly efficient and fully bio-based high-flux water filtration membranes based on commercially available nonwoven fabrics, with distinct performance for particle rejection, antifouling and antibacterial properties.


AIChE Journal ◽  
2015 ◽  
Vol 62 (2) ◽  
pp. 508-524 ◽  
Author(s):  
Melissa C. Santos ◽  
Yossef A. Elabd ◽  
Yin Jing ◽  
Brian P. Chaplin ◽  
Lei Fang

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 691 ◽  
Author(s):  
Ismara Nadir ◽  
Nosheen Fatima Rana ◽  
Nasir Mahmood Ahmad ◽  
Tahreem Tanweer ◽  
Amna Batool ◽  
...  

Plant phytochemicals have potential decontaminating properties, however, their role in the amelioration of hydrophobic water filtration membranes have not been elucidated yet. In this work, phytochemicals (i.e., cannabinoids (C) and terpenes (T) from C. sativa) were revealed for their antibacterial activity against different Gram-positive and Gram-negative bacteria. As such, a synergistic relationship was observed between the two against all strains. These phytochemicals individually and in combination were used to prepare polyethersulfone (PES) hybrid membranes. Membrane characterizations were carried out using scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy. Moreover, contact angle, water retention, surface roughness, mechanical testing, and X-ray florescence analysis were also carried out. According to results, the CT-PES hybrid membrane exhibited the lowest contact angle (40°), the highest water retention (70%), and smallest average pore size (0.04 µm). The hybrid membrane also exhibited improved water flux with no surface leaching. Quantitative bacterial decline analysis of the CT-PES hybrid membranes confirmed an effective antibacterial performance against Gram-positive and Gram-negative bacteria. The results of this study established cannabinoids and terpenes as an inexpensive solution for PES membrane surface modification. These hybrid membranes can be easily deployed at an industrial scale for water filtration purposes.


2010 ◽  
Vol 2 (3) ◽  
pp. 847-853 ◽  
Author(s):  
William A. Phillip ◽  
Brandon O’Neill ◽  
Marc Rodwogin ◽  
Marc A. Hillmyer ◽  
E. L. Cussler

MRS Advances ◽  
2020 ◽  
Vol 5 (26) ◽  
pp. 1339-1348
Author(s):  
Mary T. Simiyu ◽  
Francis W. Nyongesa ◽  
Bernard O. Aduda ◽  
Zephania Birech ◽  
Godwin Mwebaze

ABSTRACTThis work reports on the use of diatomaceous earth (DE) waste and organic binder derived from Corchorus olitorius, locally known as “Mrenda” in the design of an efficient water filtration membranes. Charcoal powder was incorporated to enhance the porosity of the membrane. The firing was done at temperatures varying from 700.0 °C to 1150.0 °C. The DE waste samples comprised 79.0% silica (by mass) and 11.0% total flux content compared to porter’s clay that had 50.0% silica, 28.8% AL2O3 and 7.0% total flux content. On the other hand, the “Mrenda” binder contained 6.5% total organic matter. The use of the plant-derived binder enhanced the mechanical strength of the greenware by 52.7% and the fired membranes by 152.2%. The fabricated DE waste-based membranes were 15.0% stronger than clay-based ceramic membranes prepared under similar conditions. A sintering temperature of 900.0 °C was optimal in producing porous membranes for filtering of 4.1 liters of water per hour. The pore diameter of the membranes fabricated from DE waste only ranged between 2.0 nm – 99.0 nm. On micro-organisms filtering efficacy, the DE waste-based membranes and those fabricated with 5.0% charcoal were 99.9% and 88.4% effective in the removal of E. coli and Rotavirus respectively.


2017 ◽  
Vol 51 (2) ◽  
pp. 905-913 ◽  
Author(s):  
Bezawit A. Getachew ◽  
Sang-Ryoung Kim ◽  
Jae-Hong Kim

Sign in / Sign up

Export Citation Format

Share Document