LINES OF EQUAL TEMPERATURE ON THE INDICATOR DIAGRAM

2011 ◽  
pp. 108-127
Author(s):  
James Clerk Maxwell
2020 ◽  
pp. 56-58
Author(s):  
S.Yu. Kaygorodov

The operation of a spur rotary pump with different elements (valve, hydraulic diode, long and short pipelines) in the discharge line is investigated. Keywords hydraulic machine, spur rotary pump, hydrodiode, indicator diagram. [email protected]


2013 ◽  
Vol 307 ◽  
pp. 285-289 ◽  
Author(s):  
Wei Wu ◽  
Yu Zhou ◽  
Hang Xin Wei

Aiming at the defects of fault diagnosis in the traditional method for sucker rod pump system, a new method based on support vector machine (SVM) pump fault diagnosis is proposed. Through studying the theory of invariant moment and the shape characteristics of pump indicator diagram, seven invariant moments is extracted from the indicator diagram as a pumping unit well condition of the characteristic parameters. Then these parameters are pretreatment, and it makes up seven eigenvector which are regarded as the input eigenvector of the SVM. The experiment indicates that the method can not only detect the fault of the pumping oil well but also can recognize the fault type of it, which is very effective for safety protection and fault diagnosis of the pumping oil.


2013 ◽  
Vol 415 ◽  
pp. 582-585
Author(s):  
Xing Xu ◽  
Zhen Cui ◽  
Jin Chao Zhang

According to the indicator diagram of damper, the indicator diagram plumpness was proposed as a quantitative index, and its mathematical relationships with the sprung mass acceleration, suspension dynamic travel and tire dynamic load were built. Moreover, the influence of the total area on suspension characteristics was analyzed in time domain and frequency domain. The results show that, the increase of the indicator diagram plumpness can effectively restrain the variation of suspension dynamic travel and tire dynamic load, meanwhile, the body acceleration will be enlarged. Excessive indicator diagram plumpness also affects the dynamic tire load distribution in frequency domain, and it will decrease the driving security. Therefore, it should be reasonably selected from the performance indicators, which is based on the requirement of vehicle demand in the design process.


1966 ◽  
Vol 44 (3) ◽  
pp. 349-364 ◽  
Author(s):  
Albert V. Tyler

The resistance and tolerance of Chrosomus eos and Chrosomus neogaeus to high temperatures were examined. Tests were conducted with C. neogaeus in winter and with C. eos in winter and summer. For both species, death at high temperatures could be separated into three lethal patterns or "effects". The first effect seemed to be associated, at least in part, with thermal shock. Factors generating the other effects were not apparent.Both species showed about the same degree of tolerance and resistance to high temperatures when they were acclimated to 15 °C or higher. At 9 °C, C. eos was less tolerant to high lethal temperatures than was C. neogaeus.When equal temperature acclimations were compared, C. eos was more resistant to high lethal temperatures in summer than in winter.


2009 ◽  
Vol 79-82 ◽  
pp. 55-58
Author(s):  
Guo Ping Chen ◽  
Jun Lin Tao ◽  
Dai Quan Zhang ◽  
Lang Tang

The unique memory function of Ni-Ti alloy makes it unique durative self-press function as the orthopaedics internal fixator devices, the durative embracing force provides a good mechanical condition for the bone healing in clinical orthopaedics. Through the special embracing force testing device and using self-designed experiment device which arms at this kind of arm-embracing Internal fixator experiment to observe the effect of the extended distance of arms on the embracing force when Ni-Ti shape memory alloy arm-embracing fixes fractures. It is researched that the state affected embracing force under the resistance effect, and fully realizes the law of embracing force’s variety. The investigation has been done to the clutching internal fixator which frequently used in clinical treatment of orthopedic and find that the embracing force increases with time and stabilizes finally, when the open end of arm-embracing internal fixator is in the equal temperature and opening under the resistive effect; it observes the character of embracing force which increasing along with the opening degree of the arms when the open end is at the same temperature and different opening degree; it also researches that the embracing force has the rule of change that it will reduce in repeated experiment at the same temperature, at the same place of the memory alloy arm-embracing clip. The research provides the instructions and references based on mechanics for clinical treatment.


1908 ◽  
Vol 28 ◽  
pp. 615-626
Author(s):  
James G. Gray ◽  
Alexander D. Ross

SUMMARY1. Nickel and the Heusler alloy give “sensitive states” of nearly 2 and about 5 per cent. respectively for a magnetising field of 8 C.G.S. units.2. Steel wire specimens dropped vertically on a stone slab from a height of 1 metre showed a reduction of 37 per cent, in the “sensitive state” for a single fall, 49 per cent, for three falls, 62 per cent, for ten falls, and 73 per cent, for fifty falls.3. After the “sensitive state” has been removed from a specimen by the process of demagnetising by reversals, it cannot be completely restored by reannealing. That is, the specimens exhibit a fatigue effect.4. In the case of one variety of steel, the “sensitive state” had been reduced to less than one-half its original value after seven annealings, and to one-fifth after seventeen.5. No recovery from the fatigue condition was observed in specimens which had been laid aside for fifty-four days.6. Repeated annealings without intermediate magnetic testing showed neither an augmentation of the “sensitive state” nor a fatigue effect.7. Specimens demagnetised at −190° C., heated to room temperature, and cooled again to −190° C., showed a small “sensitive state” at that temperature.8. Larger effects were induced by heating from −190° C. to 15° C., or by cooling from 15° C. to −190° C.9. A “sensitive state” could be induced by any variation of temperature, but not by exposure to a steady temperature, either high or low. The effect is associated solely with change of temperature.10. The amount of “sensitive state” induced by equal temperature alterations varies with the position of the range on the temperature scale and with the material.11. The change from the “sensitive” to the normal condition is unaccompanied by any appreciable change in the specific electrical resistance or elastic constants of the material.


Author(s):  
Sergey I. Mitrokhin

The boundary-value problem for an eighth-order differential operator whose potential is a piecewise continuous function on the segment of the operator definition is studied. The weight function is piecewise constant. At the discontinuity points of the operator coefficients, the conditions of "conjugation" must be satislied which follow from physical considerations. The boundary conditions of the studied boundary value problem are separated and depend on several parameters. Thus, we simultaneously study the spectral properties of entire family of differential operators with discontinuous coefficients. The asymptotic behavior of the solutions of differential equations defining the operator is obtained for large values of the spectral parameter. Using these asymptotic expansions, the conditions of "conjugation" are investigated; as a result, the boundary conditions are studied. The equation on eigenvalues of the investigated boundary value problem is obtained. It is shown that the eigenvalues are the roots of some entire function. The indicator diagram of the eigenvalue equation is investigated. The asymptotic behavior of the eigenvalues in various sectors of the indicator diagram is found.


Sign in / Sign up

Export Citation Format

Share Document