scholarly journals Experimental Stability Study on Herringbone-Microgrooved Journal Bearing in an Impeller-Spindle

2012 ◽  
Vol 28 (1) ◽  
pp. 123-133 ◽  
Author(s):  
B.-H. Chang ◽  
P.-H. Chen ◽  
D.-S. Lee
Keyword(s):  
Static Load ◽  
Journal Bearing ◽  
Stability Study ◽  
Experimental Device ◽  
Eccentricity Ratio ◽  
Tablet Pcs ◽  
Damping Coefficients ◽  
The Stability ◽  
Stiffness And Damping ◽  
Stability Results

ABSTRACTThe reliability of the impeller-spindle with respect to the effects of abnormal vibrations and noises is relative to the whirl rotation in notebook (NB) computers, all-in-one (AIO) desktop systems, and tablet PCs. This study experimentally investigates the stability of a herringbone-microgrooved journal bearing in an impeller-spindle under static radial forces.The experimental device operated at 2700, 3600, 4200, and 4900rpm, with a static load ranging from 0.4, 0.8, and 1.6N. The experiment obtained the stiffness and damping coefficients, and the study involved analyzing the stability. Results show that the dimensionless threshold speed of rotation decreased as the Sommerfeld number increased. The proposed impeller-spindle is stable when the Sommerfeld number is less than 59, indicating that the impeller-spindle should not operate at an eccentricity ratio below 0.18.

Calculation of Stiffness and Damping Properties of Gas Bearings

1968 ◽  
Vol 90 (4) ◽  
pp. 793-803 ◽  
Author(s):  
J. W. Lund
Keyword(s):  
Static Load ◽  
Journal Bearing ◽  
Computational Method ◽  
Gas Bearings ◽  
Rotating Speed ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing ◽  
Gas Bearing

The dynamic characteristics of a gas bearing can be represented by a set of spring and damping coefficients (impedances) which are functions of the static load on the bearing, the rotating speed and the whirl frequency of the journal. For a rotor supported in gas bearings, these coefficients can be used directly in a critical speed calculation or an unbalance response calculation. In addition, the coefficients can be employed in a stability investigation. The paper gives the computational method for obtaining the spring and damping coefficients and, also, describes how they are used in rotor calculations and stability studies. Numerical results are given in graphical and tabular form for a tilting pad journal bearing and a three-lobe journal bearing.

Effects of Static Load on Dynamic Structural Properties in a Flexible Supported Foil Journal Bearing

1994 ◽  
Vol 116 (3) ◽  
pp. 257-262 ◽  
Author(s):  
C. P. Roger Ku ◽  
H. Heshmat
Keyword(s):  
Static Load ◽  
Journal Bearing ◽  
Operating Conditions ◽  
Structural Stiffness ◽  
Structural Dynamic ◽  
Equivalent Viscous Damping ◽  
Damping Coefficients ◽  
Wide Range ◽  
Structural Dynamic Characteristics ◽  
Stiffness And Damping

This paper describes an experimental investigation into the structural dynamic characteristics of corrugated foil (bump foil) strips used in one type of compliant surface foil journal bearings and dampers. The nonrotating journal was supported by a compliant foil journal bearing and driven by two shakers which were used to simulate dynamic forces acting on the bump foil strips. The dynamic structural stiffness and equivalent viscous damping coefficients were calculated based on the experimental measurements for a wide range of operating conditions. The results were compared to the analytical predictions obtained by a theoretical model developed earlier, and the agreement is considered reasonably well. Both experimental and theoretical results show that the direct structural stiffness and damping coefficients increase with increasing bearing static load.

Tilting Pad Journal Bearings: A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot Flexibility

2012 ◽  
Author(s):  
Jason C. Wilkes ◽  
Dara W. Childs
Keyword(s):  
Degrees Of Freedom ◽  
Journal Bearing ◽  
Operating Temperature ◽  
Excitation Frequency ◽  
Full Model ◽  
Stability Calculation ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing

For several years, researchers have presented predictions showing that using a full tilting-pad journal bearing (TPJB) model (retaining all of the pad degrees of freedom) is necessary to accurately perform stability calculations for a shaft operating on TPJBs. This paper will discuss this issue, discuss the importance of pad and pivot flexibility in predicting impedance coefficients for the tilting-pad journal bearing, present measured changes in bearing clearance with operating temperature, and summarize the differences between measured and predicted frequency dependence of dynamic impedance coefficients. The current work presents recent test data for a 100 mm (4 in) five-pad TPJB tested in load on pad (LOP) configuration. Measured results include bearing clearance as a function of operating temperature, pad clearance and radial displacement of the loaded pad (the pad having the static load vector directed through its pivot), and frequency dependent stiffness and damping. Measured hot bearing clearances are approximately 30% smaller than measured cold bearing clearances and are inversely proportional to pad surface temperature; predicting bearing impedances with a rigid pad and pivot model using these reduced clearances results in overpredicted stiffness and damping coefficients that are several times larger than previous comparisons. The effect of employing a full bearing model versus a reduced bearing model (where only journal degrees of freedom are retained) in a stability calculation for a realistic rotor-bearing system is assessed. For the bearing tested, the bearing coefficients reduced at the frequency of the unstable eigenvalue (subsynchronously reduced) predicted a destabilizing cross-coupled stiffness coefficient at the onset of instability within 1% of the full model, while synchronously reduced coefficients for the lightly loaded bearing required 25% more destabilizing cross-coupled stiffness than the full model to cause system instability. The same stability calculation was performed using measured stiffness and damping coefficients at synchronous and subsynchronous frequencies. These predictions showed that both the synchronously measured stiffness and damping and predictions using the full bearing model were more conservative than the model using subsynchronously measured stiffness and damping, an outcome that is completely opposite from conclusions reached by comparing different prediction models. This contrasting outcome results from a predicted increase in damping with increasing excitation frequency at all speeds and loads; however, this increase in damping with increasing excitation frequency was only measured at the most heavily loaded conditions.

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

2010 ◽  
Vol 133 (1) ◽  
Author(s):  
Zhiyong Yan ◽  
Yi Lu ◽  
Tiesheng Zheng
Keyword(s):  
Degrees Of Freedom ◽  
Journal Bearing ◽  
Local Coordinate System ◽  
Dynamical Behavior ◽  
Complete Model ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Generalized Force ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing

Considering the freedom of pad tilting and pad translation along preload orientation, an analytical complete model, as well as mathematical method, which contains 2n+2 degrees of freedom, is presented for calculating the dynamical characteristics of tilting-pad journal bearing. Based on the motion relationship of shaft and pad, the local coordinate system, the generalized displacement, and the generalized force vector are chosen. The concise transformation of generalized displacement, generalized force, and its Jacobian matrix between the local and global coordinate systems are built up in matrix form. A fast algorithm using the Newton–Raphson method for calculating the equilibrium position of journal and pads is proposed. The eight reduced stiffness and damping coefficients can be obtained assuming that the journal and all pads are subject to harmonic vibration. Numerical results show that the reduced damping coefficients and the threshold speed can be effectively enhanced by giving suitable pad pivot stiffness and damping simultaneously, and this analytical method can be applied to analyze dynamical behavior of the tilting-pad journal bearing rotor system.

A Variable Viscosity Approach for the Analysis of Steady State and Dynamic Characteristics of Two-Lobe Journal Bearing With TiO2 Based Nanolubricant

2017 ◽  
Author(s):  
Ashutosh Kumar ◽  
Sashindra Kumar Kakoty
Keyword(s):  
Steady State ◽  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Flow Coefficient ◽  
Viscosity Model ◽  
Nano Lubricant ◽  
The Stability ◽  
Stiffness And Damping

Steady-state and dynamic characteristics of two-lobe journal bearing, operating on TiO2 based Nano-lubricant has been obtained. The effective viscosity is obtained by using Krieger-Dougherty viscosity model for a given volume fraction of nanoparticle in the base fluid. Various bearing performance characteristics are then obtained by solving modified Reynolds equation for variable viscosity model and couple stress model. The stiffness and damping coefficients are also determined for various values of the volume fraction of the nanoparticle in the nanofluid. Results reveal that load carrying capacity and flow coefficient increase whereas friction variable decreases without affecting the stability condition of two-lobe journal bearing operating on TiO2 based nanolubricant. On the other hand attitude angle and dynamic coefficients remains constant for all the values of volume fraction of nanoparticle.

scholarly journals Study on dynamic characteristics of gas films of spherical spiral groove hybrid gas bearings

2019 ◽  
Vol 233 (8) ◽  
pp. 1169-1181
Author(s):  
Chenhui Jia ◽  
Haijiang Zhang ◽  
Shijun Guo ◽  
Ming Qiu ◽  
Wensuo Ma ◽  
...  
Keyword(s):  
Pressure Effect ◽  
Dynamic Pressure ◽  
Iteration Algorithm ◽  
Unstable State ◽  
Gas Bearings ◽  
Damping Coefficients ◽  
The Stability ◽  
Stiffness And Damping ◽  
Film Stiffness ◽  
Gas Bearing

According to the gas film force variation law, when the bearing axis is slightly displaced from the static equilibrium position, displacement and velocity disturbance relation expressions for the gas film force increment are constructed. Moreover, combined with the bearing rotor system motion equation, calculation model equations for the gas film stiffness and damping coefficients are established. The axial and radial vibration and velocity of the gas bearings during operation are collected. The instantaneous stiffness and damping coefficients of the gas film are calculated by the rolling iteration algorithm using MATLAB. The dynamic changes in the gas film stiffness and damping under different motion states are analyzed, and the mechanism of the gas film vortex and oscillation is studied. The results demonstrate the following: (1) When the gas bearing is running in the linear steady state in cycle 1, the dynamic pressure effect is enhanced and the stability is improved by increasing the eccentricity; when the gas supply pressure is increased, the static pressure effect is enhanced and the gas film vortex is reduced, but the oscillation is strengthened. (2) With the increase in rotational speed, the gas film vortex force gradually exceeds the gas film damping force, and the stability gradually worsens, causing a fluctuation in the gas film stiffness and damping, following which singularity occurs and a half-speed vortex is formed. Meanwhile, the gas film oscillation is intensified, and the rotor enters the nonlinear stable cycle 2 state operation. (3) As the fluctuation of the film force increases, the instantaneous stiffness and damping oscillation of the film intensifies, most of the stiffness and damping coefficients exhibit distortion, and the rotor operation will enter a chaotic or unstable state. Therefore, the gas bearing stiffness and damping variation characteristics can be used to study and predict the gas bearing operating state. Finally, measures for reducing the vortex and oscillation of the gas film and improving the stability of the gas bearing operation are proposed.

Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing—Part II: Dynamic Response

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Jongin Yang ◽  
Alan Palazzolo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Dynamic Response ◽  
Journal Bearing ◽  
Three Dimensional ◽  
Static Response ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing

Part II presents a novel approach for predicting dynamic coefficients for a tilting pad journal bearing (TPJB) using computational fluid dynamics (CFD) and finite element method (FEM), including fully coupled elastic deflection, heat transfer, and fluid dynamics. Part I presented a similarly novel, high fidelity approach for TPJB static response prediction which is a prerequisite for the dynamic characteristic determination. The static response establishes the equilibrium operating point values for eccentricity, attitude angle, deflections, temperatures, pressures, etc. The stiffness and damping coefficients are obtained by perturbing the pad and journal motions about this operating point to determine changes in forces and moments. The stiffness and damping coefficients are presented in “synchronously reduced form” as required by American Petroleum Institute (API) vibration standards. Similar to Part I, an advanced three-dimensional thermal—Reynolds equation code validates the CFD code for the special case when flow Between Pad (BP) regions is ignored, and the CFD and Reynolds pad boundary conditions are made identical. The results show excellent agreement for this validation case. Similar to the static response case, the dynamic characteristics from the Reynolds model show large discrepancies compared with the CFD results, depending on the Reynolds mixing coefficient (MC). The discrepancies are a concern given the key role that stiffness and damping coefficients serve instability and response predictions in rotordynamics software. The uncertainty of the MC and its significant influence on static and dynamic response predictions emphasizes a need to utilize the CFD approach for TPJB simulation in critical machines.

Influence of Wear on the Performance of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
E. Rajasekhar Nicodemus ◽  
Satish C. Sharma
Keyword(s):  
Journal Bearing ◽  
Dynamic Performance ◽  
Flow Equation ◽  
Performance Characteristics ◽  
Wear Depth ◽  
Damping Coefficients ◽  
Load Line ◽  
Wide Range ◽  
Load Arrangement ◽  
Stiffness And Damping

The objective of the present work is to study theoretically the influence of wear on the performance of four-pocket capillary-compensated hydrostatic journal bearing operating with micropolar lubricant. In the present study, the lubricant containing additives and contaminants is modeled as micropolar fluid. The modified Reynolds equation for micropolar lubricant is solved using finite element method along with capillary restrictor flow equation as a constraint together with appropriate boundary conditions. The performance characteristics of a capillary-compensated four-pocket worn hydrostatic journal bearing operating with micropolar lubricant have been presented for a wide range of values of nondimensional external load, wear depth parameter, and micropolar parameters. The simulated results have also been presented for two different loading arrangements. In arrangement I, the load line acts through centers of the pockets, whereas in arrangement II, the load line bisects the land between two pockets. The simulated results suggest that a bearing lubricated with lubricant having higher micropolar effect has better static and dynamic performance characteristics as compared with Newtonian lubricant but the bearing lubricated with lubricant having higher micropolar effect is predominantly affected by the wear vis a vis static characteristics parameters as compared with Newtonian lubricant for both loading arrangements. However, in the case of stiffness and damping coefficients, loading arrangement II shows a significant higher enhancement in the value of direct stiffness and damping coefficients in z-direction due to micropolar effect as compared with load arrangement I. And also, the effect of wear on stiffness and damping coefficients in z-direction for bearing operating with micropolar lubricant is of same order as Newtonian lubricant for the loading arrangement II. A similar behavior is observed for the case of stiffness and damping coefficients in x-direction for loading arrangement I.

Steady-State and Dynamic Behaviour of Multi-Recess Hybrid Oil Journal Bearings

1979 ◽  
Vol 21 (5) ◽  
pp. 345-351 ◽  
Author(s):  
M. K. Ghosh ◽  
B. C. Majumdar ◽  
J. S. Rao
Keyword(s):  
Perturbation Theory ◽  
Steady State ◽  
Theoretical Analysis ◽  
Dynamic Behaviour ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Time Dependent ◽  
Damping Coefficients ◽  
Stiffness And Damping

A theoretical analysis of the steady-state and dynamic characteristics of multi-recess hybrid oil journal bearings is presented. A perturbation theory for small vibrations is used to solve an incompressible, finite journal bearing with a time-dependent term. Load capacity, attitude angle, friction parameter, stiffness and damping coefficients are evaluated for a capillary-compensated bearing.

Sign in / Sign up

Export Citation Format

Share Document