MHD Pulsating Flow of Casson Nanofluid in a Vertical Porous Space with Thermal Radiation and Joule Heating

2020 ◽  
Vol 36 (4) ◽  
pp. 535-549
Author(s):  
Challa Kalyan Kumar ◽  
Suripeddi Srinivas ◽  
Anala Subramanyam Reddy
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Motion Parameter ◽  
Porous Space ◽  
Perturbation Scheme ◽  
Casson Nanofluid ◽  
Nanoparticles Concentration ◽  
The Impact ◽  
Brownian Motion Parameter

ABSTRACTIn this investigation, the magnetohydrodynamic pulsatile flow of Casson nanofluid through a vertical channel embedded in porous medium with thermal radiation and heat generation/absorption has been analyzed using Buongiorno model. The influence of viscous and Joules dissipations are taken into account. The governing coupled partial differential equations are reduced to ordinary differential equations using perturbation scheme and then solved numerically by using Runge-Kutta fourth order technique along with shooting method. The impact of various emerging parameters on velocity, temperature, nanoparticles concentration, Nusselt number and Sherwood number distributions are analyzed in detail. Analysis indicates that the temperature distribution increases for a given increase in Brownian motion parameter and thermophoresis parameter, while it decreases with an increase in Hartmann number. Further, the nanoparticles concentration distribution decreases with an increase in the chemical reaction parameter and the Lewis number, while it increases for a given increase in the Brownian motion parameter.

scholarly journals MHD three dimensional flow of Oldroyd-B nanofluid over a bidirectional stretching sheet: DTM-Padé Solution

2019 ◽  
Vol 8 (1) ◽  
pp. 744-754 ◽  
Author(s):  
Sumit Gupta ◽  
Sandeep Gupta
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Prandtl Number ◽  
Comparative Study ◽  
Stretching Sheet ◽  
Fluid Velocity ◽  
Deborah Number ◽  
Motion Parameter ◽  
Physical Parameters ◽  
Brownian Motion Parameter

Abstract Current article is devoted with the study of MHD 3D flow of Oldroyd B type nanofluid induced by bi-directional stretching sheet. Expertise similarity transformation is confined to reduce the governing partial differential equations into ordinary nonlinear differential equations. These dimensionless equations are then solved by the Differential Transform Method combined with the Padé approximation (DTM-Padé). Dealings of the arising physical parameters namely the Deborah numbers β1 and β2, Prandtl number Pr, Brownian motion parameter Nb and thermophoresis parameter Nt on the fluid velocity, temperature and concentration profile are depicted through graphs. Also a comparative study between DTM and numerical method are presented by graph and other semi-analytical techniques through tables. It is envisage that the velocity profile declines with rising magnetic factor, temperature profile increases with magnetic parameter, Deborah number of first kind and Brownian motion parameter while decreases with Deborah number of second kind and Prandtl number. A comparative study also visualizes comparative study in details.

scholarly journals Chemically reactive nanofluid flow past a thin moving needle with viscous dissipation, magnetic effects and hall current

PLoS ONE ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. e0249264
Author(s):  
Arshad Khan ◽  
Wiyada Kumam ◽  
Imran Khan ◽  
Anwar Saeed ◽  
Taza Gul ◽  
...  
Keyword(s):  
Brownian Motion ◽  
Viscous Dissipation ◽  
Hall Current ◽  
Thermal Characteristics ◽  
Motion Parameter ◽  
Hybrid Nanoparticles ◽  
Volume Fractions ◽  
Magnetic Effects ◽  
The Impact ◽  
Brownian Motion Parameter

This work addresses the ability to manage the distribution of heat transmission for fluid flow occurs upon a paraboloid thin shaped hot needle by using hybrid nanoparticles containing Copper Oxide (CuO) and Silver (Ag) with water as pure fluid. The needle is placed horizontally in nanofluid with an application of Hall current and viscous dissipation. The popular Buongiorno model has employed in the current investigation in order to explore the impact of Brownian and thermophoretic forces exerted by the fluid. The modeled equations with boundary conditions are transformed to non-dimensional form by incorporating a suitable group of similarity variables. This set of ordinary differential equations is then solved by employing homotopy analysis method (HAM). After detail study of the current work, it has established that the flow of fluid reduces with growth in magnetic effects and volume fractions of nanoparticles. Thermal characteristics increase with augmentation of Eckert number, magnetic field, volume fractions of nanoparticles, Brownian motion parameter and decline with increase in Prandtl number. Moreover, concentration of nanoparticles reduces with corresponding growth in Lewis number and thermophoresis, chemical reaction parameters while increases with growth in Brownian motion parameter.

scholarly journals Unsteady squeezing flow of a magnetized nano-lubricant between parallel disks with Robin boundary conditions

2021 ◽  
pp. 239779142110365
Author(s):  
JC Umavathi ◽  
Sapnali Limbaraj Patil ◽  
B Mahanthesh ◽  
O Anwar Bég
Keyword(s):  
Brownian Motion ◽  
Boundary Conditions ◽  
Friction Factor ◽  
Motion Parameter ◽  
Robin Boundary Conditions ◽  
Nano Lubricant ◽  
Robin Boundary ◽  
The Impact ◽  
Biot Numbers ◽  
Brownian Motion Parameter

The aim of the present work is to examine the impact of magnetized nanoparticles (NPs) in enhancement of heat transport in a tribological system subjected to convective type heating (Robin) boundary conditions. The regime examined comprises the squeezing transition of a magnetic (smart) Newtonian nano-lubricant between two analogous disks under an axial magnetism. The lower disk is permeable whereas the upper disk is solid. The mechanisms of haphazard motion of NPs and thermophoresis are simulated. The non-dimensional problem is solved numerically using a finite difference method in the MATLAB bvp4c solver based on Lobotto quadrature, to scrutinize the significance of thermophoresis parameter, squeezing number, Hartmann number, Prandtl number, and Brownian motion parameter on velocity, temperature, nanoparticle concentration, Nusselt number, factor of friction, and Sherwood number distributions. The obtained results for the friction factor are validated against previously published results. It is found that friction factor at the disk increases with intensity in applied magnetic field. The haphazard (Brownian) motion of nanoparticles causes an enhancement in thermal field. Suction and injection are found to induce different effects on transport characteristics depending on the specification of equal or unequal Biot numbers at the disks. The main quantitative outcome is that, unequal Biot numbers produce significant cooling of the regime for both cases of disk suction or injection, indicating that Robin boundary conditions yield substantial deviation from conventional thermal boundary conditions. Higher thermophoretic parameter also elevates temperatures in the regime. The nanoparticles concentration at the disk is boosted with higher values of Brownian motion parameter. The response of temperature is similar in both suction and injection cases; however, this tendency is quite opposite for nanoparticle concentrations. In the core zone, the resistive magnetic body force dominates and this manifests in a significant reduction in velocity, that is damping. The heat build-up in squeeze films (which can lead to corrosion and degradation of surfaces) can be successfully removed with magnetic nanoparticles leading to prolonged serviceability of lubrication systems and the need for less maintenance.

Influence of nonlinear thermal radiation on rotating flow of Casson nanofluid

2018 ◽  
Vol 7 (2) ◽  
pp. 91-101 ◽  
Author(s):  
M. Archana ◽  
B. J. Gireesha ◽  
B. C. Prasannakumara ◽  
R.S.R. Gorla
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Nonlinear Thermal Radiation ◽  
Shooting Technique ◽  
Casson Nanofluid ◽  
Similarity Transformations ◽  
Heating Effects ◽  
Temperature Component ◽  
Fifth Order ◽  
The Impact

Abstract The heat and mass transfer of rotating Casson nanofluid flow is incorporated in the present study. Influence of magnetic field, nonlinear thermal radiation, viscous dissipation and Joule heating effects are taken into the account. A set of nonlinear ordinary differential equations are obtained from the governing partial differential equations with the aid of suitable similarity transformations. The resultant equations are solved for the numerical solution using Runge-Kutta-Fehlberg fourth-fifth order method along with shooting technique. The impact of several existing physical parameter on velocity, temperature and nanofluid concentration profiles are analyzed through graphs and tables in detail. It is found that, velocity component decreases and temperature component increases for rotating parameter.

scholarly journals Sensitivity Analysis on Thermal Conductivity Characteristics of a Water-Based Bionanofluid Flow Past a Wedge Surface

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Sze Qi Chan ◽  
Fazlina Aman ◽  
Syahira Mansur
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Lewis Number ◽  
Motion Parameter ◽  
Nonlinear Ordinary Differential Equations ◽  
Shooting Technique ◽  
Wedge Surface ◽  
Water Based ◽  
Local Sherwood Number ◽  
Brownian Motion Parameter

Thermobioconvection boundary layer flow in a suspension of water-based bionanofluid holding both nanoparticles and motile microorganisms past a wedge surface was studied. The governing nonlinear partial differential equations on reference of the Buongiorno model were transformed into a set of coupled nonlinear ordinary differential equations. Shooting technique was then used to solve the transformed nonlinear ordinary differential equations numerically. The solutions were found to be contingent on several values of the governing parameters. As highlighted, the velocity profile as well as the skin friction coefficient was affected by the pressure gradient parameter, the function of the wedge angle parameter. On the other hand, the temperature, nanoparticle concentration, and density of motile microorganism’s distributions together with its corresponding local Nusselt number, local Sherwood number, and local density of the motile microorganisms change with the thermophoresis and Brownian motion parameter and so Lewis number, Schmidt number, and bioconvection Péclet number. An experimental scheme together with sensitivity analysis on the basis of Response Surface Methodology (RSM) was applied to examine the dependency of the response parameters of interest to the input parameters’ change. Obviously, local Nusselt number was more sensitive towards the Brownian motion parameter when the Brownian motion parameter was at 0.2 and 0.3. However local Sherwood number was more sensitive towards the Lewis number for all values of Brownian motion parameter. Compatibility found by comparing results between RSM and shooting technique gave confidence for the model’s accuracy. The findings would provide initial guidelines for future device fabrication. Finally, the numerical results obtained were thoroughly inspected and verified with the existing values reported by some researchers.

scholarly journals Analytical Investigation of Magnetohydrodynamic Non-Newtonian Type Casson Nanofluid Flow past a Porous Channel with Periodic Body Acceleration

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
N. Thamaraikannan ◽  
S. Karthikeyan ◽  
Dinesh Kumar Chaudhary ◽  
Safak Kayikci
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Perturbation Technique ◽  
Analytical Investigation ◽  
Porous Channel ◽  
Body Acceleration ◽  
Casson Nanofluid ◽  
Flow Equations ◽  
Flow Features ◽  
The Impact

The consequence of periodic body acceleration and thermal radiation in the pulsating flow of MHD Casson nanofluid through a porous channel is addressed. A flow of the nanofluid injected through the lower plate is considered while sucked out through the upper plate with a similar velocity. The thermal radiation term is incorporated in the heat transfer equation. The governing equations corresponding to velocity and temperature are converted from partial differential equations to a system of ordinary differential equations by employing similarity variables. The perturbation technique is applied to solve the governing flow equations. The impact of diverse parameters on flow features is graphically analyzed. The result reveals that adding the nanoparticle has enhanced the velocity profile of the base fluid. Moreover, an increase in the periodic body acceleration results in enlarging velocity and temperature.

Exact Analysis of the Flow and Heat Transfer of the SA-TiO2 Non-Newtonian Nanofluid Between Two Coaxial Cylinders Through a Porous Medium

2017 ◽  
Vol 72 (9) ◽  
pp. 855-862
Author(s):  
Mariam Almazmumy ◽  
Abdelhalim Ebaid
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Brownian Motion ◽  
Pressure Gradient ◽  
Motion Parameter ◽  
Coaxial Cylinders ◽  
Exact Analysis ◽  
Flow And Heat Transfer ◽  
Nanoparticles Concentration ◽  
Brownian Motion Parameter

AbstractIn this article, the flow and heat transfer of a non-Newtonian nanofluid between two coaxial cylinders through a porous medium has been investigated. The velocity, temperature, and nanoparticles concentration of the present mathematical model are governed by a system of nonlinear ordinary differential equations. The objective of this article is to obtain new exact solutions for the temperature and the nanoparticles concentration and, therefore, compare them with the previous approximate results in the literature. Moreover, the velocity equation has been numerically solved. The effects of the pressure gradient, thermophoresis, third-grade, Brownian motion, and porosity parameters on the included phenomena have been discussed through several tables and plots. It is found that the velocity profile is increased by increasing the pressure gradient parameter, thermophoresis parameter (slightly), third-grade parameter, and Brownian motion parameter (slightly); however, it decreases with an increase in the porosity parameter and viscosity power index. In addition, the temperature and the nanoparticles concentration reduce with the strengthen of the Brownian motion parameter, while they increase by increasing the thermophoresis parameter. Furthermore, the numerical solution and the physical interpretation in the literature for the same problem have been validated with the current exact analysis, where many remarkable differences and errors have been concluded. Therefore, the suggested analysis may be recommended with high trust for similar problems.

scholarly journals Boundary Layer Analysis in Nanofluid Flow Past a Permeable Moving Wedge in Presence of Magnetic Field by Using Falkner – Skan Model

2018 ◽  
Vol 23 (4) ◽  
pp. 1005-1013 ◽  
Author(s):  
M. Ali ◽  
M.A. Alim
Keyword(s):  
Boundary Layer ◽  
Brownian Motion ◽  
Differential Equations ◽  
Pressure Gradient ◽  
Ordinary Differential Equations ◽  
Velocity Ratio ◽  
Lewis Number ◽  
Motion Parameter ◽  
Gradient Parameter ◽  
Brownian Motion Parameter

Abstract In the present work, the effect of various dimensionless parameters on the momentum, thermal and concentration boundary layer are analyzed. In this respect we have considered the MHD boundary layer flow of heat and transfer over a porous wedge surface in a nanofluid. The governing partial differential equations are converted into ordinary differential equations by using the similarity transformation. These ordinary differential equations are numerically solved using fourth order Runge–Kutta method along with shooting technique. The present results have been shown in a graphical and also in tabular form. The results indicate that the momentum boundary layer thickness reduces with increasing values of the pressure gradient parameter β for different situations and also for the magnetic parameter M but increases for the velocity ratio parameter λ and permeability parameter K*. The heat transfer rate increases for the pressure gradient parameter β, velocity ratio parameter λ, Brownian motion parameter Nb and Prandtl number Pr but opposite result is found for the increasing values of the thermoporesis parameter Nt. The nanoparticle concentration rate increases with an increase in the pressure gradient parameter β, velocity ratio parameter λ, Brownian motion parameter Nb and Lewis number Le, but decreases for the thermoporesis parameter Nt. Finally, the numerical results has compared with previously published studies and found to be in good agreement. So the validity of our results is ensured.

Thermo-Solutal Convection of a Nanofluid Utilizing Fourier’s-Type Compass Conditions

2020 ◽  
Vol 9 (4) ◽  
pp. 362-374
Author(s):  
J. C. Umavathi ◽  
Ali J. Chamkha
Keyword(s):  
Brownian Motion ◽  
Prandtl Number ◽  
Boundary Conditions ◽  
Volume Fraction ◽  
Temperature Fields ◽  
Physical Parameters ◽  
Surface Boundary ◽  
Perturbation Scheme ◽  
Runge Kutta ◽  
The Impact

Nanotechnology has infiltrated into duct design in parallel with many other fields of mechanical, medical and energy engineering. Motivated by the excellent potential of nanofluids, a subset of materials engineered at the nanoscale, in the present work, a new mathematical model is developed for natural convection in a vertical duct containing nanofluid. Numerical scrutiny for the double-diffusive free and forced convection within a duct encumbered with nanofluid is performed. Buongiorno’s model is deployed to define the nanofluid. Robin boundary conditions are used to define the surface boundary conditions. Thermal and concentration equations envisage the viscous, Brownian motion, thermosphores of the nanofluid, Soret and Dufour effects. Using the Boussi-nesq approximation the solutal buoyancy effect as a result of gradients in concentration are incorporated. The conservation equations which are nonlinear are numerically estimated using fourth order Runge-Kutta methodology and analytically ratifying regular perturbation scheme. The mass, heat, nanoparticle concentration and species concentration fields on eight dimensionless physical parameters such as thermal and mass Grashof numbers, Brownian motion parameter, thermal parameter, Prandtl number, Eckert number, Schmidt parameter, and Soret parameter are calculated. The impact of these parameters are outlined pictorially. The velocity and temperature fields are boosted with the thermal Grashof number. The Soret and the Schemidt parameters reduces the nanoparticle volume fraction but it heightens the momentum, temperature and concentration. At the cold wall thermal and concentration Grashof numbers reduces the Nusselt values but they increase the Nusselt values at the hot wall. The reversal consequence was attained at the hot plate. The perturbation and Runge-Kutta solutions are equal in the nonappearance of Prandtl number. The (E. Zanchini, Int. J. Heat Mass Transfer 41, 3949 (1998)). results are restored for the regular fluid. The heat transfer rate is high for nanofluid when matched with regular fluid.

Numerical study of Carreau nanofluid flow past vertical plate with the Cattaneo–Christov heat flux model

2019 ◽  
Vol 29 (2) ◽  
pp. 702-723 ◽  
Author(s):  
Vasu B. ◽  
Atul Kumar Ray
Keyword(s):  
Heat Flux ◽  
Brownian Motion ◽  
Weissenberg Number ◽  
Motion Parameter ◽  
Conduction Model ◽  
Content Type ◽  
Carreau Nanofluid ◽  
Flux Model ◽  
Heat Flux Model ◽  
Brownian Motion Parameter

PurposeTo achieve material-invariant formulation for heat transfer of Carreau nanofluid, the effect of Cattaneo–Christov heat flux is studied on a natural convective flow of Carreau nanofluid past a vertical plate with the periodic variations of surface temperature and the concentration of species. Buongiorno model is considered for nanofluid transport, which includes the relative slip mechanisms, Brownian motion and thermophoresis.Design/methodology/approachThe governing equations are non-dimensionalized using suitable transformations, further reduced to non-similar form using stream function formulation and solved by local non-similarity method with homotopy analysis method. The numerical computations are validated and verified by comparing with earlier published results and are found to be in good agreement.FindingsThe effects of varying the physical parameters such as Prandtl number, Schmidt number, Weissenberg number, thermophoresis parameter, Brownian motion parameter and buoyancy ratio parameter on velocity, temperature and species concentration are discussed and presented through graphs. The results explored that the velocity of shear thinning fluid is raised by increasing the Weissenberg number, while contrary response is seen for the shear thickening fluid. It is also found that heat transfer in Cattaneo–Christov heat conduction model is less than that in Fourier’s heat conduction model. Furthermore, the temperature and thermal boundary layer thickness expand with the increase in thermophoresis and Brownian motion parameter, whereas nanoparticle volume fraction increases with increase in thermophoresis parameter, but reverse trend is observed with increase in Brownian motion parameter.Originality/valueThe present investigation is relatively original as very little research has been reported on Carreau nanofluids under the effect of Cattaneo–Christov heat flux model.

Sign in / Sign up

Export Citation Format

Share Document