A Study of Quartz Orientation and its Relation to Movement in Shear Folds

1962 ◽  
Vol 99 (1) ◽  
pp. 69-84 ◽  
Author(s):  
P. K. Gangopadhyay ◽  
M. R. W. Johnson

AbstractThe orientation of quartz in small shear folds, which belong to two movement episodes, is considered to result from laminar flow along the axial plane surfaces. The locations of fabric maxima and girdles are controlled by the orientation of thea–kinematic axis, which in shear folds may not be normal to the fold axis, and the shear surfaces. The earlier fabric consists, essentially, of paired maxima arranged systematically about the axial plane;ac–girdles are absent. The explanation of the near-orthorhombic symmetry of the first fabric in terms of a late “flattening” overprinted upon the previously-formed fold is not favoured: quartz orientation developed during the first folding. The later fabric results from the recrystallization of quartz grains with their largest dimensions andc–axes parallel to the calculateda–kinematic axis of second folding.

1979 ◽  
Vol 116 (2) ◽  
pp. 105-116 ◽  
Author(s):  
K. Yagishita ◽  
R. C. Morris

SummaryA thin-section study of the orientation of long-axes of quartz grains was conducted for a similar type fold of overturned cross-bedding in Carboniferous sandstones. Preferred orientation of detrital grains of the fold shows that (a) apparent long-axes of grains are parallel to the axial plane in a plane normal to the fold axis, (b) long-axes of grains in the axial plane are oriented in a high angle to the fold axis, and (c) grains are aligned parallel to the fold axis in a plane perpendicular to the other two directions. From the dimensional orientation of quartz grains in this sample, it is concluded that the overturned fold was made by a shear mechanism immediately following sedimentation in which the original quartz grains were reorientated by small-scale slippage along the shear planes.


2021 ◽  
Author(s):  
Andreas Scharf ◽  
Ivan Callegari ◽  
Frank Mattern ◽  
Katharina Scharf ◽  
Eugenio Carminati

<p>The Jabal Akhdar Dome (JAD) of the Oman Mountains contains superbly exposed sedimentary Neoproterozoic formations in its core. Carbonates of the Hajir Formation are resistant against erosion in the prevailing semi-arid conditions unlike the subjacent and overlying siliciclastic formations. Structural fieldwork and satellite image analyses reveals that the central-western JAD (Hat Plateau) was affected by three folding events. Each event produced its own fascinating fold style with associated structures. The widely exposed Hajir carbonates displays these folds spectacularly. The geomorphology of these carbonates reflects the folds with differently oriented rides and troughs as anti- and synclines, respectively. Thus, the JAD acted as a natural laboratory where the 3D fold styles can be directly linked to the geomorphology and vice versa.</p><p>A previously unrecognized folding event (F1) produced overturned NNE-verging tight folds. The fold amplitude ranges between tens and hundreds of meters, and the overall non-plunging fold axes trend ESE. The F1 folds are associated with a gently to moderately SSW-ward dipping penetrative axial plane cleavage. Open to tight upright kilometric F2 folds refolded the F1 structures. The F2 folds are overall non-plunging and NE/NNE-trending, and contain a penetrative sub-vertical axial plane schistosity, parallelly oriented to the F2 axes. The youngest folding event (F3) produces one open and broad anticline. The F3 fold axis trends WNW through the Hat Plateau and the anticline contains a WNW-striking sub-vertical spaced axial plane schistosity.</p><p>The deformation style of the F2 folds and related structures changes abruptly along a NNE-oriented zone at the western end of the Hat Plateau. West of this, the F2 structures are ENE-oriented while east of it the orientation is NE to NNE. Furthermore, the amplitude of the F2 folds decreases from ~3 km in the west to <1 km in the east. We relate this sudden change of the F2 style to the western flank of a pre-existing subsurface basement horst. We suggest that this NNE-striking horst is the northern continuation of the Makarem-Mabrouk High/Horst below the JAD. The eastern horst shoulder would be at the eastern margin of the JAD and parallel to the Semail Gap. A buttressing effect along the western horst’s shoulder during NW/SE to WNW/ESE-directed F2 shortening would explain the dramatic change in the F2 style.</p><p>In summary and in 3D terms, the F1 folds were originally oriented parallel to the present F1 anticline, i.e. before the F2 deformation, while the F2 folds strike almost perpendicularly to this direction. The F1 and F2 folding episodes associated with the abrupt change in F2 style are depicted in a steric block diagram, which visualizes the complex findings, allowing for a 3D understanding of the structures.</p>


2010 ◽  
Vol 147 (6) ◽  
pp. 910-918 ◽  
Author(s):  
MANISH A. MAMTANI ◽  
POULOMI SENGUPTA

AbstractQuartzites tend to be compositionally homogeneous, and because of this, deformation related fabric elements (foliations and lineations) are poorly developed in them. This makes structural analysis of deformed quartzites challenging. The measurement of anisotropy of magnetic susceptibility (AMS) is useful for recognizing structural imprints in rocks that lack mesoscopic fabrics and the present study is carried out with an aim to demonstrate the robustness of AMS in analysing such deformation imprints in quartzites. AMS data of samples from folded quartzites located in an approximately 10 km2 area around Galudih (eastern India) are presented. Although on a regional scale, superposed deformation and ductile shearing are known from the area, the investigated quartzites do not preserve mesoscopic evidence of these large-scale features and have developed folds that plunge gently towards the SE with a vertical NW–SE-striking axial plane. The magnetic foliation recorded from AMS analysis is parallel to the axial plane, while the orientation of the magnetic lineation varies from SE through vertical to NW. This is similar to the large-scale fold axis variations recorded in various regional domains mapped over an area of about 200 km2. It is concluded that although the imprint of regional superposed deformation is not obvious on the mesoscopic scale in the quartzites around Galudih, this imprint can be detected from the magnetic fabric. The present study thus highlights the usefulness of AMS in analysing superposed folds in quartzites.


1976 ◽  
Vol 13 (1) ◽  
pp. 54-65 ◽  
Author(s):  
H. A. K. Charlesworth ◽  
C. W. Langenberg ◽  
J. Ramsden

The fold-axis is the eigenvector associated with the smallest eigenvalue of a symmetrical 3 × 3 matrix of direction cosines of poles to the folded surface, only if the fold is cylindrical. Cylindricity can be tested using either a χ2 or an F test. Sections showing the traces of macroscopic surfaces and of the axial plane may be constructed with the aid of computer plots that show the projection of each outcrop as well as the trace of the folded surface. The orientation of the axial plane can be calculated from the orientations of the fold-axis and the trace of the axial plane on a section normal to the fold-axis. These numerical procedures are illustrated by an analysis of four folds from the Rocky Mountains.


Author(s):  
T. G. Naymik

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.


Author(s):  
Rob. W. Glaisher ◽  
A.E.C. Spargo

Images of <11> oriented crystals with diamond structure (i.e. C,Si,Ge) are dominated by white spot contrast which, depending on thickness and defocus, can correspond to either atom-pair columns or tunnel sites. Olsen and Spence have demonstrated a method for identifying the correspondence which involves the assumed structure of a stacking fault and the preservation of point-group symmetries by correctly aligned and stigmated images. For an intrinsic stacking fault, a two-fold axis lies on a row of atoms (not tunnels) and the contrast (black/white) of the atoms is that of the {111} fringe containing the two-fold axis. The breakdown of Friedel's law renders this technique unsuitable for the related, but non-centrosymmetric binary compound sphalerite materials (e.g. GaAs, InP, CdTe). Under dynamical scattering conditions, Bijvoet related reflections (e.g. (111)/(111)) rapidly acquire relative phase differences deviating markedly from thin-crystal (kinematic) values, which alter the apparent location of the symmetry elements needed to identify the defect.


Author(s):  
F. Al-Kufaishi

Two localities (Al-Marij and Laik) were selected to investigate the type of Quartz Grains from crustal material formed by evaporation of waters discharged by springs in Hit area, western Iraq, Previous studies on the crustal material (1,2) showed that the water discharged by these springs are associated with Abu-Jir fault system which run parallel to the Euphrates river,Factor analyses of the crustal and soil materials (50 samples analysed for 16 variables)(2) showed five factors; the first factor includes SiO2, Al2O3 and TiO2 with positive factor loading, and CaO, L.O.I. with negative loading and hence lead to the conclusion that the distribution of these variables is a reflection of transported clay material.This study concentrates on the use of SEM to investigate the contribution of Quartz grains found in the crustal material on two selected sites.


Sign in / Sign up

Export Citation Format

Share Document