Spread of a non-Newtonian liquid jet over a horizontal plate

2008 ◽  
Vol 613 ◽  
pp. 411-443 ◽  
Author(s):  
JIANGANG ZHAO ◽  
ROGER E. KHAYAT

The flow of an impinging non-Newtonian jet onto a solid flat plate is examined theoretically in this study. Similarity solutions are sought for both shear-thinning and shear-thickening fluids of the power-law type. The jet is assumed to spread out in a thin layer bounded by a hydraulic jump. In addition to the stagnation-flow region, the flow domain is divided into three main regions: a developing boundary layer, fully viscous boundary layer and hydraulic jump. The anomalous behaviour of power-law fluids at small shear rate is remedied by seeking a two-layer solution in each domain. Such anomalies include the singularity of viscosity for shear-thinning fluids, and the vanishing of viscosity as well the overshoot in velocity for shear-thickening fluids. Although the rate of shear-thinning appears to affect significantly the film profile and velocity, only the overall viscosity influences the position of the hydraulic jump.

2014 ◽  
Vol 751 ◽  
pp. 184-215
Author(s):  
Liyan Yu ◽  
John Hinch

AbstractWe study the solitary wave solutions in a thin film of a power-law fluid coating a vertical fibre. Different behaviours are observed for shear-thickening and shear-thinning fluids. For shear-thickening fluids, the solitary waves are larger and faster when the reduced Bond number is smaller. For shear-thinning fluids, two branches of solutions exist for a certain range of the Bond number, where the solitary waves are larger and faster on one and smaller and slower on the other as the Bond number decreases. We carry out an asymptotic analysis for the large and fast-travelling solitary waves to explain how their speeds and amplitudes change with the Bond number. The analysis is then extended to examine the stability of the two branches of solutions for the shear-thinning fluids.


Author(s):  
Akhilesh K. Sahu ◽  
Raj P. Chhabra ◽  
V. Eswaran

The two-dimensional and unsteady flow of power-law fluids past a long square cylinder has been investigated numerically in the range of conditions 60 ≤ Re ≤ 160 and 0.5 ≤ n ≤ 2.0. Over this range of Reynolds numbers, the flow is periodic in time for Newtonian fluids. However, no such information is available for power law fluids. A semi-explicit finite volume method has been used on a non-uniform collocated grid arrangement to solve the governing equations. The macroscopic quantities such as drag coefficients, Strouhal number, lift coefficient as well as the detailed kinematic variables like stream function, vorticity and so on, have been calculated as functions of the pertinent dimension-less groups. In particular, the effects of Reynolds number and of the power-law index have been investigated in the unsteady laminar flow regime. The leading edge separation in shear-thinning fluids produces an increase in drag values with the increasing Reynolds number, while shear-thickening behaviour delays the leading edge separation. So, the drag coefficient in the above-mentioned range of Reynolds number, Re, in shear-thinning fluids (n < 1) initially decreases but at high values of the Reynolds number, it increases. As expected, on the other hand, in case of shear-thickening fluids (n > 1) drag coefficient reduces with Reynolds number, Re. Furthermore, the present results also suggest the transition from steady to unsteady flow conditions to occur at lower Reynolds numbers in shear-thickening fluids than that in Newtonian fluids. Also, the spectra of lift signal for shear-thickening fluids show that the flow is truly periodic in nature with a single dominant frequency in the above range of Reynolds number. In shear-thinning fluids at higher Re, quasi-periodicity sets in with additional frequencies, which indicate the transition from the 2-D to 3-D flows.


2006 ◽  
Author(s):  
Jiangang Zhao ◽  
Roger E. Khayat

The similarity solutions are presented for the wall flow which is formed when a smooth planar jet of power-law fluids impinges vertically on to a horizontal plate, and spreads out in a thin layer bounded by a hydraulic jump. This problem is formulated analogous to radial jet flow problem and the solution procedure is accounted for by means of similarity solution of the boundary-layer equation [1] for Newtonian fluids. For the convenience of analysis, the flow may be divided into three regions, namely a developing boundary-layer region, a fully viscous boundary-layer region, and a hydraulic jump region. The similarity solutions of the film thickness and free surface velocity in fully viscous boundary-layer region include unknown constant L, which is solved numerically and approximately in the developing boundary-layer flow region. Comparison between the numerical and approximate solutions leads generally to good agreement, except for severely shear-thinning fluids. The boundary-layer solution depends on two parameters: power-law index n and α, the dimensionless flow parameters. The effect of α on film thickness and free surface velocity is investigated. The relations between the position of the hydraulic jump and dimensionless flow parameter are obtained and the effect of α on the position of the jump is presented.


2017 ◽  
Vol 826 ◽  
pp. 918-941 ◽  
Author(s):  
A. Bougouin ◽  
L. Lacaze ◽  
T. Bonometti

Experiments on the collapse of non-colloidal and neutrally buoyant particles suspended in a Newtonian fluid column are presented, in which the initial volume fraction of the suspension $\unicode[STIX]{x1D719}$, the viscosity of the interstitial fluid $\unicode[STIX]{x1D707}_{f}$, the diameter of the particles $d$ and the mixing protocol, i.e. the initial preparation of the suspension, are varied. The temporal evolution of the slumping current highlights two main regimes: (i) an inertial-dominated regime followed by (ii) a viscous-dominated regime. The inertial regime is characterized by a constant-speed slumping which is shown to scale as in the case of a classical inertial dam-break. The viscous-dominated regime is observed as a decreasing-speed phase of the front evolution. Lubrication models for Newtonian and power-law fluids describe most of situations encountered in this regime, which strongly depends on the suspension parameters. The temporal evolution of the propagating front is used to extract the rheological parameters of the fluid models. At the early stages of the viscous-dominated regime, a constant effective shear viscosity, referred to as an apparent Newtonian viscous regime, is found to depend only on $\unicode[STIX]{x1D719}$ and $\unicode[STIX]{x1D707}_{f}$ for each mixing protocol. The obtained values are shown to be well fitted by the Krieger–Dougherty model whose parameters involved, say a critical volume fraction $\unicode[STIX]{x1D719}_{m}$ and the exponent of divergence, depend on the mixing protocol, i.e. the microscale interaction between particles. On a longer time scale which depends on $\unicode[STIX]{x1D719}$, the front evolution is shown to slightly deviate from the apparent Newtonian model. In this apparent non-Newtonian viscous regime, the power-law model, indicating both shear-thinning and shear-thickening behaviours, is shown to be more appropriate to describe the front evolution. The present experiments indicate that the mixing protocol plays a crucial role in the selection of a shear-thinning or shear-thickening type of collapse, while the particle diameter $d$ and volume fraction $\unicode[STIX]{x1D719}$ play a significant role in the shear-thickening case. In all cases, the normalized effective consistency of the power-law fluid model is found to be a unique function of $\unicode[STIX]{x1D719}$. Finally, an apparent viscoplastic regime, characterized by a finite length spreading reached at finite time, is observed at high $\unicode[STIX]{x1D719}$. This regime is mostly observed for volume fractions larger than $\unicode[STIX]{x1D719}_{m}$ and up to a volume fraction $\unicode[STIX]{x1D719}_{M}$ close to the random close packing fraction at which the initial column remains undeformed on opening the gate.


2013 ◽  
Vol 135 (6) ◽  
Author(s):  
Izadpanah Ehsan ◽  
Sefid Mohammad ◽  
Nazari Mohammad Reza ◽  
Jafarizade Ali ◽  
Ebrahim Sharifi Tashnizi

Two-dimensional laminar flow of a power-law fluid passing two square cylinders in a tandem arrangement is numerically investigated in the ranges of 1< Re< 200 and 1 ≤ G ≤ 9. The fluid viscosity power-law index lies in the range 0.5 ≤ n ≤ 1.8, which covers shear-thinning, Newtonian and shear-thickening fluids. A finite volume code based on the SIMPLEC algorithm with nonstaggered grid is used. In order to discretize the convective and diffusive terms, the third order QUICK and the second-order central difference scheme are used, respectively. The influence of the power-law index, Reynolds number and gap ratio on the drag coefficient, Strouhal number and streamlines are investigated, and the results are compared with other studies in the literature to validate the methodology. The effect of the time integration scheme on accuracy and computational time is also analyzed. In the ranges of Reynolds number and power-law index studied here, vortex shedding is known to occur for square cylinders in tandem. This study represents the first systematic investigation of this phenomenon for non-Newtonian fluids in the open literature. In comparison to Newtonian fluids, it is found that the onset of leading edge separation occurs at lower Reynolds number for shear-thinning fluids and is delayed to larger values for shear-thickening fluids.


Author(s):  
Purushotam Kumar ◽  
Kai Jin ◽  
Surya Pratap Vanka

Abstract In this paper, we have applied a recently-developed numerical technique to study the three-dimensional dynamics of a confined air bubble rising in shear thinning and shear-thickening power-law fluids. The method is a blend of Volume of Fluid and Level Set methods and incorporates a Sharp Surface Force Method (SSF) for surface tension forces by solving a second Pressure Poisson Equation (PPE). The gas-liquid interface is captured by an equation for the liquid volume fraction and advected using the geometry reconstruction method. The interface normal and curvature are computed using level-set and height function methods. The accurate representation of the interface and interfacial forces significantly suppressed the spurious velocities commonly observed with conventional volume of fluid method and the Continuum Surface Force (CSF). The algorithm is implemented in a in-house code called CUFLOW and runs on multiple GPUs platform. We explored the effects of fluid rheology, Bond number, and wall confinement on bubble’s transient shape, rise velocity, rise path, and generated vortex structures. The power-law index is varied from 0.25 to 1.50 covering shear-thinning and shear-thickening regimes. Three Bond numbers (Bo = 2, 10 and 50) and three confinement ratios (Cr = 4, 6 and 8) are considered, and their impacts on bubble’s dynamics are analyzed. For the range of parameters examined here, bubble motion in a shear-thinning fluid is seen to be unsteady with significant shape oscillations. The bubble rises with a secondary motion in the cross-sectional plane along with its primary vertical rise. However, in the Newtonian and shear-thickening fluids, the bubble’s shape is seen to reach a steady-state in a relatively short time and rise with only minor deviations from the vertical path.


2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
R. M. Akram Muntazir ◽  
M. Mushtaq ◽  
S. Shahzadi ◽  
K. Jabeen

Due to potential implications, boundary layer analysis of chemically reacting Carreau nanofluid has been carried out to examine flow properties of ferromagnetic fluid over a stretched sheet in the presence of magnetic dipole, for shear thinning and shear thickening fluids. Furthermore, the transportation of heat under thermal radiation, heat generation, the Brownian, and thermophoresis aspects has been evaluated. The dimensionless form of highly nonlinear coupled partial differential equations is obtained using suitable similarity transformations and then solved numerically by well-known bvp 4 c technique via MATLAB based on the shooting method. The outcomes of physical quantities are presented through graphs and numerical benchmarks. Moreover, outcomes for skin fraction, Sherwood and Nusselt numbers for velocity, concentration, and temperature are also estimated in this study. The present study reveals that the concentration and thermal boundary layer thicknesses were higher for shear thinning n < 1 fluid when compared with shear thickening n > 1 fluids, but reverse effects are to be observed for momentum boundary layer thickness.


Sign in / Sign up

Export Citation Format

Share Document