The dynamics of infection of Tribolium confusum by Hymenolepis diminuta: the influence of exposure time and host density

Parasitology ◽  
1982 ◽  
Vol 84 (1) ◽  
pp. 157-166 ◽  
Author(s):  
Anne Keymer
Keyword(s):  
Exposure Time ◽  
Parasite Burden ◽  
Host Density ◽  
Faecal Pellet ◽  
Experimental Results ◽  
Hymenolepis Diminuta ◽  
Parasite Transmission ◽  
Experimental Conditions ◽  
Instantaneous Rate ◽  
The Mean

SUMMARYSurvival of Hymenolepis diminuta eggs (as measured by their infectivity to the intermediate host) was found to be age-dependent with an expected value of 11 days when the eggs were retained within the faecal pellet at 10 °C. The expected life-span of eggs under experimental conditions (i.e. extracted from faecal material and placed on filter paper at 30 °C) was estimated as 33 min. The mean parasite burden of populations of Tribolium exposed to known densities of H. diminuta eggs was found to rise to a plateau with increasing exposure time. The experimental results provided a method of estimating the instantaneous rate of parasite transmission: a value of 0·0004/egg/min/host/13 cm2 was obtained. The mean parasite burden of populations of T. confusum exposed to known densities of H. diminuta eggs was found to decrease exponentially with increasing host density. A second estimate of the instantaneous rate of parasite transmission of 0·004/egg/min/host/13 cm2 was obtained from the experimental results. No differences in susceptibility to infection between 2-week-old male and female beetles were found. A marked decrease, however, was apparent with increasing beetle age up to 14 weeks post-eclosion.

Articulatory Behavior Pre and Post Full-Mouth Tooth Extraction and Alveoloplasty

1980 ◽  
Vol 23 (3) ◽  
pp. 630-645 ◽  
Author(s):  
Gerald Zimmermann ◽  
J.A. Scott Kelso ◽  
Larry Lander
Keyword(s):  
Control Subject ◽  
High Speed ◽  
Tooth Extraction ◽  
Kinematic Parameters ◽  
Experimental Conditions ◽  
Mean Values ◽  
Articulatory Movements ◽  
The Mean ◽  
Experimental Subjects ◽  
Normal Speech

High speed cinefluorography was used to track articulatory movements preceding and following full-mouth tooth extraction and alveoloplasty in two subjects. Films also were made of a control subject on two separate days. The purpose of the study was to determine the effects of dramatically altering the structural dimensions of the oral cavity on the kinematic parameters of speech. The results showed that the experimental subjects performed differently pre and postoperatively though the changes were in different directions for the two subjects. Differences in both means and variabilities of kinematic parameters were larger between days for the experimental (operated) subjects than for the control subject. The results for the Control subject also showed significant differences in the mean values of kinematic variables between days though these day-to-day differences could not account for the effects found pre- and postoperatively. The results of the kinematic analysis, particularly the finding that transition time was most stable over the experimental conditions for the operated subjects, are used to speculate about the coordination of normal speech.

Regularity and latency of units in ventral cochlear nucleus: implications for unit classification and generation of response properties

1988 ◽  
Vol 60 (1) ◽  
pp. 1-29 ◽  
Author(s):  
E. D. Young ◽  
J. M. Robert ◽  
W. P. Shofner
Keyword(s):  
Standard Deviation ◽  
Cochlear Nucleus ◽  
Interspike Interval ◽  
Rate Adaptation ◽  
Stellate Cells ◽  
Instantaneous Rate ◽  
Ventral Cochlear Nucleus ◽  
Bushy Cell ◽  
Low Pass ◽  
The Mean

1. The responses of neurons in the ventral cochlear nucleus (VCN) of decerebrate cats are described with regard to their regularity of discharge and latency. Regularity is measured by estimating the mean and standard deviation of interspike intervals as a function of time during responses to short tone bursts (25 ms). This method extends the usual interspike-interval analysis based on interval histograms by allowing the study of temporal changes in regularity during transient responses. The coefficient of variation (CV), equal to the ratio of standard deviation to mean interspike interval, is used as a measure of irregularity. Latency is measured as the mean and standard deviation of the latency of the first spike in response to short tone bursts, with 1.6-ms rise times. 2. The regularity and latency properties of the usual PST histogram response types are shown. Five major PST response type classes are used: chopper, primary-like, onset, onset-C, and unusual. The presence of a prepotential in a unit's action potentials is also noted; a prepotential implies that the unit is recorded from a bushy cell. 3. Units with chopper PST histograms give the most regular discharge. Three varieties of choppers are found. Chop-S units (regular choppers) have CVs less than 0.35 that are approximately constant during the response; chop-S units show no adaptation of instantaneous rate, as measured by the inverse of the mean interspike interval. Chop-T units have CVs greater than 0.35, show an increase in irregularity during the response and show substantial rate adaptation. Chop-U units have CVs greater than 0.35, show a decrease in irregularity during the response, and show a variety of rate adaptation behaviors, including negative adaptation (an increase in rate during a short-tone response). Irregular choppers (chop-T and chop-U units) rarely have CVs greater than 0.5. Choppers have the longest latencies of VCN units; all three groups have mean latencies at least 1 ms longer than the shortest auditory nerve (AN) fiber mean latencies. 4. Chopper units are recorded from stellate cells in VCN (35, 42). Our results for chopper units suggest a model for stellate cells in which a regularly firing action potential generator is driven by the summation of the AN inputs to the cell, where the summation is low-pass filtered by the membrane capacitance of the cell.(ABSTRACT TRUNCATED AT 400 WORDS)

scholarly journals Comparison of Bite Force in Patients After Treatment of Mandibular Fractures With 3-Dimensional Locking Miniplate and Standard Miniplates

2019 ◽  
Vol 1 (1) ◽  
pp. 7-10
Author(s):  
Gaurav Singh ◽  
Madan Mishra ◽  
Amit Gaur ◽  
Dhritiman Pathak
Keyword(s):  
Treatment Strategies ◽  
Bite Force ◽  
Mandibular Fractures ◽  
Time Intervals ◽  
Experimental Conditions ◽  
3 Dimensional ◽  
The Mean ◽  
Group 2 ◽  
Drilling Conditions ◽  
Group 1

Background: Fractures of the mandible can be studied and described in anatomic terms, functional considerations, treatment strategies, and outcome measures. The performance of any fixation system depends on multiple factors including plate adaptation, screw placement, bone quality, drilling conditions, and postoperative patient compliance. Bite force assesses masticatory muscle function under clinical and experimental conditions. Method: 30 patients with isolated, noncomminuted mandibular fractures were randomly divided into two equal groups. Group 1 patients were treated using 3-dimensional locking miniplates and group 2 patients were treated with standard miniplates. The bite forces were recorded at definite time intervals: preoperatively, and second week, sixth week, third month, and sixth month postoperatively. Result: At 6 weeks postoperative, 3 month postoperative, and 6 month postoperative, the mean bite force was found to be significantly higher among group 1 patients as compared to those in group 2 in all the sites. While at 2 week postoperative, the mean bite force was found to be significantly higher in Group 2 as compared to Group 1 at incisor region. Conclusion: The overall results of the present study show better performance in bite force for the 3-dimensional locking miniplate when compared with standard miniplates.

scholarly journals Contour Detection for Fibre of Preserved Szechuan Pickle Based on Dilated Convolution

2019 ◽  
Vol 9 (13) ◽  
pp. 2684 ◽  
Author(s):  
Hongyang Li ◽  
Lizhuang Liu ◽  
Zhenqi Han ◽  
Dan Zhao
Keyword(s):  
Edge Detection ◽  
State Of The Art ◽  
Contour Detection ◽  
Experimental Results ◽  
Contour Method ◽  
Class Differences ◽  
Dilated Convolution ◽  
The Mean ◽  
Art Performance

Peeling fibre is an indispensable process in the production of preserved Szechuan pickle, the accuracy of which can significantly influence the quality of the products, and thus the contour method of fibre detection, as a core algorithm of the automatic peeling device, is studied. The fibre contour is a kind of non-salient contour, characterized by big intra-class differences and small inter-class differences, meaning that the feature of the contour is not discriminative. The method called dilated-holistically-nested edge detection (Dilated-HED) is proposed to detect the fibre contour, which is built based on the HED network and dilated convolution. The experimental results for our dataset show that the Pixel Accuracy (PA) is 99.52% and the Mean Intersection over Union (MIoU) is 49.99%, achieving state-of-the-art performance.

An Examination of Language Samples Obtained under Three Experimental Conditions

1982 ◽  
Vol 13 (2) ◽  
pp. 121-128 ◽  
Author(s):  
Louise D. Stalnaker ◽  
Nancy A. Creaghead
Keyword(s):  
Preschool Children ◽  
Head Start ◽  
Experimental Conditions ◽  
Semantic Relationships ◽  
Three Samples ◽  
The Mean ◽  
Mean Length Of Utterance ◽  
Language Sample

Language samples were obtained from 12 Head Start preschool children under the following three experimental conditions: Condition I, Retelling a Story with Toys; Condition II, Playing with Toys; Condition III, Toys with Questions. The quantity and quality of the three samples gathered from each child were compared by analyzing the total number of utterances, the proportion of the total utterances which were sentence fragments, the number of transformations and adverbial expansions, the number of different semantic relationships, and the mean length of utterance (MLU). Results indicated that retelling a story produced the largest MLU, but toys and questions produced more utterances. These findings indicated that questioning children does not inhibit their language and asking them to retell a story may be a fruitful approach to use when gathering a language sample.

Vibratory Feeding by Nonsinusoidal Vibration—Optimum Wave Form

1985 ◽  
Vol 107 (2) ◽  
pp. 188-195 ◽  
Author(s):  
S. Okabe ◽  
Y. Kamiya ◽  
K. Tsujikado ◽  
Y. Yokoyama
Keyword(s):  
Experimental Results ◽  
Wave Form ◽  
Velocity Wave ◽  
The Mean ◽  
Straight Lines ◽  
Vibratory Conveyor ◽  
Theoretical Results ◽  
Vibratory Feeding

This paper presents the conveying velocity on a vibratory conveyor whose track is vibrated by nonsinusoidal vibration. The velocity wave form of the vibrating track is approximated by six straight lines, and five distortion factors of the wave form are defined. Considering the modes of motion of the particle, the mean conveying velocity is calculated for various conditions. Referring to these results, the optimum wave form is clarified analytically. The theoretical results show that the mean conveying velocity is considerably larger than that of ordinary feeders if the proper conveying conditions are chosen. The theoretical results are confirmed by experimental results.

scholarly journals Analyzing Individual Differences in Intervention-Related Changes

2021 ◽  
Vol 4 (1) ◽  
pp. 251524592097917
Author(s):  
Tanja Könen ◽  
Julia Karbach
Keyword(s):  
Individual Differences ◽  
Measurement Invariance ◽  
Educational Psychology ◽  
Intervention Studies ◽  
Regression To The Mean ◽  
Short Introduction ◽  
Experimental Conditions ◽  
Occupational Psychology ◽  
Average Group ◽  
The Mean

Intervention studies can be expensive and time-consuming, which is why it is important to extract as much knowledge as possible. We discuss benefits and limitations of analyzing individual differences in intervention studies in addition to traditional analyses of average group effects. First, we present a short introduction to latent change modeling and measurement invariance in the context of intervention studies. Then, we give an overview on options for analyzing individual differences in intervention-related changes with a focus on how substantive information can be distinguished from methodological artifacts (e.g., regression to the mean). The main topics are benefits and limitations of predicting changes with baseline data and of analyzing correlated change. Both approaches can offer descriptive correlational information about individuals in interventions, which can inform future variations of experimental conditions. Applications increasingly emerge in the literature—from clinical, developmental, and educational psychology to occupational psychology—and demonstrate their potential across all of psychology.

Effects of Elevated Atmospheric CO2 and its Interaction with Temperature and Nitrogen on Yield of Barley (Hordeum vulgare L.): A Meta-analysis

2021 ◽  
Author(s):  
Mekides Woldegiorgis Gardi ◽  
Bettina I.G Haussmann ◽  
Waqas Ahmed Malik ◽  
Petra Högy
Keyword(s):  
Grain Yield ◽  
Nitrogen Fertilizer ◽  
Meta Analysis ◽  
N Fertilization ◽  
Additional Stress ◽  
Hordeum Vulgare L ◽  
Grain Number ◽  
Experimental Conditions ◽  
Elevated Atmospheric Co2 ◽  
The Mean

Abstract AimsThe general aim of this meta-analysis is to synthesize and summarise the mean response of barley yield variables to elevated CO2 (eCO2) and its interaction with temperature and N fertilization. Methods The present study quantitatively synthesized the response of barley to eCO2 and its interaction with temperature, and Nitrogen (N). A meta-analysis procedure was used to analyse five yield variables of barley extracted from 76 articles to determine the effect size and the magnitude in relation to eCO2 and its interaction with temperature and N. Results CO2 enrichment increased biomass (23.8%), grain number (24.8%), grain yield (27.4%), and thousand-grain weight (5.6%). However, responses to eCO2 were affected by genotype, additional stress, and experimental conditions. In comparison, genotype “Anakin” shows the highest response of biomass (47.1%), while “Genebank accessions” had a higher grain number (46.1%) and grain yield (57.1%) under eCO2. The maximal enhancement of barley yield was observed when plants grow under a combination of eCO2 and higher nitrogen fertilizer (>100 kg ha-1). Nevertheless, biomass (-12%), and grain yield (-17%) responses were lower when eCO2 is combined with high temperature (>25 °C). It was further noted the response of barley yield to eCO2 was higher in the growth chamber than in other CO2 exposure methods. Moreover, comparing pot-rooted versus field-rooted barley plants, a higher response of biomass and grain yield was observed for pot-rooted plants. ConclusionsOverall, results suggest that the maximal barley production under eCO2 will be obtained in combination with high nitrogen fertilizer and optimal temperature (21-25 °C).

Crucial Effects of Weightlessness on Human Orientation

1993 ◽  
Vol 3 (3) ◽  
pp. 307-314 ◽  
Author(s):  
H. Mittelstaedt ◽  
S. Glasauer
Keyword(s):  
Visual Cues ◽  
Decisive Role ◽  
Experimental Conditions ◽  
Subjective Vertical ◽  
Independent Components ◽  
Human Orientation ◽  
The Mean ◽  
Trunk Tilt

This contribution examines the consequences of two remarkable experiences of subjects in weightlessness, 1) the missing of sensations of trunk tilt and of the respective concomitant reflexes when the head is tilted with respect to the trunk, and 2) the persistence of a perception of “up” and “down,” that is, of the polarity of the subjective vertical (SV) in the absence of, as well as in contradiction to, visual cues. The first disproves that the necessary head-to-trunk coordinate transformation be achieved by adding representations of the respective angles gained by utricles and neck receptors, but corroborates an extant model of cross-multiplication of utricular, saccular, and neck receptor components. The second indicates the existence of force-independent components in the determination of the SV. Although the number of subjects is still small and experimental conditions are not as homogeneous as desired, measurements and/or reports on the ground, in parabolic, and in space flight point to the decisive role of the saccular z-bias, that is, of a difference of the mean resting discharges of saccular units polarized in the rostrad and the caudad (±z-) direction.

scholarly journals Impact of Material Shade and Distance from Light Curing Unit Tip on the Depth of Polymerization of Composites

2017 ◽  
Vol 28 (5) ◽  
pp. 632-637 ◽  
Author(s):  
André L. Faria-e-Silva ◽  
Christopher Fanger ◽  
Lillian Nguyen ◽  
Demetri Howerton ◽  
Carmem S. Pfeifer
Keyword(s):  
Light Transmission ◽  
Degree Of Conversion ◽  
Experimental Conditions ◽  
Composite Surface ◽  
Infra Red ◽  
Light Curing ◽  
Different Depths ◽  
The Mean

Abstract This study aimed to evaluate the effect of the composite shade and distance from the light-curing unit (LCU) tip on the irradiance reaching the bottom of composite disks and on the depth of polymerization. Composites of three shades (opaque - OXDC, bleach - BXL, and A2) were inserted into molds with 3-mm of thickness positioned over a spectrometer and photo-activated with the LCU (Bluephase) tip placed at 0 or 1 cm from the composite surface. The mean irradiance reaching the bottom of composite was recorded during the entire photo-activation (30 s). Specimens (2 x 2 x 4 mm) were polymerized and used to map the degree of conversion achieved in different depths from irradiated surface. Specimens were sectioned into slices that were positioned over the platform of the infra-red microscope connected to the spectrometer to map the conversion. The conversion was measured in eight different depths every 500-µm. Increasing the distance of LCU tip reduced the irradiance only for A2. Interposing OXDC disks resulted in lowest values of irradiance and A2 the highest one. A tendency to decrease the conversion was observed towards the bottom of specimens for all experimental conditions, and the slope was more accentuated for OXDC. Differences among shades and distances from LCU tip were evident only beyond 1.5-2.0 mm of depth. In conclusion, both composite shade and distance from LCU tip might affect the light-transmission and depth of polymerization, while the effect of last was more pronounced.

Sign in / Sign up

Export Citation Format

Share Document