Giardia intestinalis can interact, change its shape and internalize large particles and microorganisms

Parasitology ◽  
2020 ◽  
pp. 1-11
Author(s):  
Marlene Benchimol

Abstract Giardia intestinalis is a parasitic protozoan that inhabits its vertebrate hosts' upper small intestine and is the most common cause of waterborne diarrhoea worldwide. Giardia trophozoites present few organelles, and among them, they possess peripheral vesicles (PVs), which are considered an endosomal–lysosomal system. All experimental procedures carried out until now indicate that Giardia ingests macromolecules by fluid-phase and receptor-mediated endocytic pathways. Still, there is no description concerning the interaction and ingestion of large materials. Here, we tested Giardia's capacity to interact with large particles; once, in vivo, it inhabits an environment with a microbiota. We tested protozoan interaction with yeasts, bacteria, latex beads, ferritin and albumin, in different times of interaction and used several microscopy techniques (light microscopy, scanning electron microscopy and transmission electron microscopy) to follow their fate. Giardia interacted with all of the materials we tested. Projections of the plasma membrane similar to pseudopods were seen. As albumin, small markers were found in the PVs while the larger materials were not seen there. Large vacuoles containing large latex beads were detected intracellularly. Thus, we observed that: (1) Giardia interacts with large materials; (2) Giardia can display an amoeboid shape and exhibit membrane projections when in contact with microorganisms and large inorganic materials; (3) the region of the exit of the ventral flagella is very active when in contact with large materials, although all cell surface also present activity in the interactions; (4) intracellular vacuoles, which are not the PVs, present ingested large beads.

Author(s):  
G. Thomas

Over the past two decades tremendous progress has been made in the use of advanced transmission electron microscopy techniques to solve complex materials problems. This is especially true in the case of inorganic materials, such as multicomponent metal oxides. The inherent complexity of the crystal structure and microstructure of these ceramic materials as well as the interdependence of the final properties on microstructure and processing mean that detailed characterization of the effect of processing variables on the structure and microstructure is imperative. Electron microscopy has become firmly established as a powerful tool to explore the structure and microstructure of these materials. Due to the various types of interactions of electrons with materials, the electron microscope is unique in that it can provide morphological, structural, compositional and in the case of materials such as ferroelectrics information on the domain and domain wall configurations. This is illustrated and summarized in Fig. 1. In this review, some typical examples of the applications of advanced transmission electron microscopy techniques to solving problems in ferroelectric materials will be discussed.


Crystals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1131
Author(s):  
Maricela Santana ◽  
Gonzalo Montoya ◽  
Raúl Herrera ◽  
Lía Hoz ◽  
Enrique Romo ◽  
...  

Dental cementum contains unique molecules that regulate the mineralization process in vitro and in vivo, such as cementum protein 1 (CEMP1). This protein possesses amino acid sequence motifs like the human recombinant CEMP1 with biological activity. This novel cementum protein 1-derived peptide (CEMP1-p3, from the CEMP1’s N-terminal domain: (QPLPKGCAAVKAEVGIPAPH), consists of 20 amino acids. Hydroxyapatite (HA) crystals could be obtained through the combination of the amorphous precursor phase and macromolecules such as proteins and peptides. We used a simple method to synthesize peptide/hydroxyapatite nanocomposites using OCP and CEMP1-p3. The characterization of the crystals through scanning electron microscopy (SEM), powder X-ray diffraction (XRD), high--resolution transmission electron microscopy (HRTEM), and Raman spectroscopy revealed that CEMP1-p3 transformed OCP into hydroxyapatite (HA) under constant ionic strength and in a buffered solution. CEMP1-p3 binds and highly adsorbs to OCP and is a potent growth stimulator of OCP crystals. CEMP1-p3 fosters the transformation of OCP into HA crystals with crystalline planes (300) and (004) that correspond to the cell of hexagonal HA. Octacalcium phosphate crystals treated with CEMP1-p3 grown in simulated physiological buffer acquired hexagonal arrangement corresponding to HA. These findings provide new insights into the potential application of CEMP1-p3 on possible biomimetic approaches to generate materials for the repair and regeneration of mineralized tissues, or restorative materials in the orthopedic field.


2017 ◽  
Vol 46 (1) ◽  
pp. 47-61 ◽  
Author(s):  
Uschi M. Graham ◽  
Robert A. Yokel ◽  
Alan K. Dozier ◽  
Lawrence Drummy ◽  
Krishnamurthy Mahalingam ◽  
...  

This is the first utilization of advanced analytical electron microscopy methods, including high-resolution transmission electron microscopy, high-angle annular dark field scanning transmission electron microscopy, electron energy loss spectroscopy, and energy-dispersive X-ray spectroscopy mapping to characterize the organ-specific bioprocessing of a relatively inert nanomaterial (nanoceria). Liver and spleen samples from rats given a single intravenous infusion of nanoceria were obtained after prolonged (90 days) in vivo exposure. These advanced analytical electron microscopy methods were applied to elucidate the organ-specific cellular and subcellular fate of nanoceria after its uptake. Nanoceria is bioprocessed differently in the spleen than in the liver.


2010 ◽  
Vol 10 ◽  
pp. 879-893 ◽  
Author(s):  
Nathaniel G. N. Milton ◽  
J. Robin Harris

The diabetes-associated human islet amyloid polypeptide (IAPP) is a 37-amino-acid peptide that forms fibrilsin vitroandin vivo. Human IAPP fibrils are toxic in a similar manner to Alzheimer's amyloid-β (Aβ) and prion protein (PrP) fibrils. Previous studies have shown that catalase binds to Aβ fibrils and appears to recognize a region containing the Gly-Ala-Ile-Ile sequence that is similar to the Gly-Ala-Ile-Leu sequence found in human IAPP residues 24-27. This study presents a transmission electron microscopy (TEM)—based analysis of fibril formation and the binding of human erythrocyte catalase to IAPP fibrils. The results show that human IAPP 1-37, 8-37, and 20-29 peptides form fibrils with diverse and polymorphic structures. All three forms of IAPP bound catalase, and complexes of IAPP 1-37 or 8-37 with catalase were identified by immunoassay. The binding of biotinylated IAPP to catalase was high affinity with a KDof 0.77nM, and could be inhibited by either human or rat IAPP 1-37 and 8-37 forms. Fibrils formed by the PrP 118-135 peptide with a Gly-Ala-Val-Val sequence also bound catalase. These results suggest that catalase recognizes a Gly-Ala-Ile-Leu—like sequence in amyloid fibril-forming peptides. For IAPP 1-37 and 8-37, the catalase binding was primarily directed towards fibrillar rather than ribbon-like structures, suggesting differences in the accessibility of the human IAPP 24-27 Gly-Ala-Ile-Leu region. This suggests that catalase may be able to discriminate between different structural forms of IAPP fibrils. The ability of catalase to bind IAPP, Aβ, and PrP fibrils demonstrates the presence of similar accessible structural motifs that may be targets for antiamyloid therapeutic development.


2021 ◽  
Vol 15 (3) ◽  
pp. 203-208
Author(s):  
Sérgio Pinter Garcia Filho ◽  
Leandro Luis Martins ◽  
Paulo Fernandes Marcusso ◽  
Tais Harumi de Castro Sasahara ◽  
Márcia Rita Fernandes Machado

Lowland paca (Cuniculus paca, Linnaeus, 1766) is a medium-sized rodent that belongs to the Brazilian fauna. Yet little information on its morphology is found in the specialized literature. Thus, the objective of the work was to study the morphology of the adrenal gland of paca by means of microscopic ultrastructure analysis. The adrenal gland secretes specialized substances in the body which promote biological functions of great importance and will provide valuable information to studies in comparative anatomy. Two (2) adult lowland pacas were used, male and female. Soon after death, the animals were positioned in the supine position; their abdominal cavities were opened by pre-retro umbilical and lateral incision followed by folding of the abdominal walls to expose the glands. The adrenal glands were removed; fragments were collected, fixed and prepared for ultrastructure observations using scanning electron microscopy and transmission electron microscopy techniques. It was observed that the adrenal glands of the paca have divisions as well as the limits of the cortical and medullary region, as well as the subdivisions of the glomerulosa, fasciculated and reticulated areas of the cortical region as in other rodents. An ultrastructure of cells and their components also showed a lot of similarity to that already demonstrated in different rodents.


2020 ◽  
Vol 1013 ◽  
pp. 52-58
Author(s):  
Xu Dong Lu ◽  
Song Yi Shi ◽  
Bo Wen ◽  
Ya Wei Zhang ◽  
Jin Hui Du

The relaxation properties of GH4169 alloy were studied contrastively at temperatures ranging from 600 oC to 700 °C and initial stress ranging from 550 MPa to 850 MPa. The relationship between the microstructure and relaxation behavior was evaluated using transmission electron microscopy techniques. It was found that the relaxation limit and relaxation stability of the alloy decreased obviously with the increase of temperature. Further investigations show that the relaxation behavior is mainly depend on both precipitate characteristics and its interaction with dislocations. The alloy with higher strength lever has more excellent stress relaxation stability, because of the inhibition of a large number subgrains on dislocations motion.


Coatings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 496
Author(s):  
Mingyu Zhao ◽  
Guanqi Liu ◽  
Ying Li ◽  
Xiaodong Yu ◽  
Shenpo Yuan ◽  
...  

In this study, a specific Mg–Zn–RE alloy membrane with 6 wt.% zinc and 2.7 wt.% rare earth elements (Y, Gd, La and Ce) was prepared to investigate implant degradation, transport mechanism and guide bone regeneration in vivo. The Mg-membrane microstructure and precipitates were characterized by the scanning electron microscopy (SEM) and the transmission electron microscopy (TEM). The Mg-membrane degradation process and effect on osteogenesis were investigated in a critical-sized rat calvarial defect model via micro-CT examination and hard tissue slicing after 2-, 5- and 8-week implants. Then, the distribution of elements in organs after 1-, 2- and 4-weeks implantation was examined to explore their transportation routes. Results showed that two types of precipitates had formed in the Mg–membrane after a 10-h heat treatment at 175 °C: γ-phase MgZn precipitation with dissolved La, Ce and Gd, and W-phase Mg3(Y, Gd)2Zn3 precipitation rich in Y and Gd. In the degradation process of the Mg-membrane, the Mg matrix degraded first, and the rare earth-rich precipitation particles were transferred to a more stable phosphate compound. The element release rate was dependent on the precipitate type and composition. Rare earth elements may be transported mainly through the lymph system. The defects were repaired rapidly by the membranes. The Mg-membrane used in the present study showed excellent biocompatibility and enhanced bone formation in the vicinity of the implants.


2009 ◽  
Vol 64 (8) ◽  
pp. 922-928 ◽  
Author(s):  
Manuel Christian Schaloske ◽  
Hansjürgen Mattausch ◽  
Viola Duppel ◽  
Lorenz Kienle ◽  
Arndt Simon

The compounds Pr6(C2)Br10, Pr10(C2)2Br15 and Pr14(C2)3Br20 were prepared from PrBr3 and the appropriate amounts of Pr and C and characterized by X-ray structure analyses of single crystals. All three compounds crystallize in space group P1 with lattice parameters a = 7.571(2), b = 9.004(2), c = 9.062(2) Å ,α = 108.57(3), β = 97.77(3), γ = 106.28(3)◦ for Pr6(C2)Br10; a = 9.098(2), b = 10.127(2), c = 10.965(2) A° , α = 70.38(3), β = 66.31(3), γ = 70.84(3)◦ for Pr10(C2)2Br15; a = 9.054(2), b = 10.935(2), c = 13.352(3) Å , α = 86.27(3), β = 72.57(3), γ = 66.88(3)◦ for Pr14(C2)3Br20. They are members of a general series Ln4n+2(C2)nBr5n+5 and isostructural with the corresponding iodides known for Ln = La, Ce, Pr. Pr6(C2)Br10 was further characterized via transmission electron microscopy techniques


Sign in / Sign up

Export Citation Format

Share Document