scholarly journals Ultrastructure of the adrenal gland of paca (Cuniculus paca, Linnaeus, 1766) in captivity

2021 ◽  
Vol 15 (3) ◽  
pp. 203-208
Author(s):  
Sérgio Pinter Garcia Filho ◽  
Leandro Luis Martins ◽  
Paulo Fernandes Marcusso ◽  
Tais Harumi de Castro Sasahara ◽  
Márcia Rita Fernandes Machado
Keyword(s):  
Electron Microscopy ◽  
Adrenal Gland ◽  
Adrenal Glands ◽  
Comparative Anatomy ◽  
The Body ◽  
Cortical Region ◽  
Lateral Incision ◽  
Transmission Electron ◽  
In Captivity ◽  
Microscopy Techniques

Lowland paca (Cuniculus paca, Linnaeus, 1766) is a medium-sized rodent that belongs to the Brazilian fauna. Yet little information on its morphology is found in the specialized literature. Thus, the objective of the work was to study the morphology of the adrenal gland of paca by means of microscopic ultrastructure analysis. The adrenal gland secretes specialized substances in the body which promote biological functions of great importance and will provide valuable information to studies in comparative anatomy. Two (2) adult lowland pacas were used, male and female. Soon after death, the animals were positioned in the supine position; their abdominal cavities were opened by pre-retro umbilical and lateral incision followed by folding of the abdominal walls to expose the glands. The adrenal glands were removed; fragments were collected, fixed and prepared for ultrastructure observations using scanning electron microscopy and transmission electron microscopy techniques. It was observed that the adrenal glands of the paca have divisions as well as the limits of the cortical and medullary region, as well as the subdivisions of the glomerulosa, fasciculated and reticulated areas of the cortical region as in other rodents. An ultrastructure of cells and their components also showed a lot of similarity to that already demonstrated in different rodents.

Fin Level Defect Isolation Inside a FinFET Using Electron Beam Alteration of Current Flow

2017 ◽  
Author(s):  
H.J. Ryu ◽  
A.B. Shah ◽  
Y. Wang ◽  
W.-H. Chuang ◽  
T. Tong
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Focused Ion Beam ◽  
Current Flow ◽  
Ion Beam ◽  
The Body ◽  
Complete Understanding ◽  
Root Cause ◽  
Transmission Electron ◽  
Defect Isolation

Abstract When failure analysis is performed on a circuit composed of FinFETs, the degree of defect isolation, in some cases, requires isolation to the fin level inside the problematic FinFET for complete understanding of root cause. This work shows successful application of electron beam alteration of current flow combined with nanoprobing for precise isolation of a defect down to fin level. To understand the mechanism of the leakage, transmission electron microscopy (TEM) slice was made along the leaky drain contact (perpendicular to fin direction) by focused ion beam thinning and lift-out. TEM image shows contact and fin. Stacking fault was found in the body of the silicon fin highlighted by the technique described in this paper.

scholarly journals Adhesion of cells to surfaces coated with polylysine. Applications to electron microscopy.

1975 ◽  
Vol 66 (1) ◽  
pp. 198-200 ◽  
Author(s):  
D Mazia ◽  
G Schatten ◽  
W Sale
Keyword(s):  
Electron Microscopy ◽  
Sea Urchin ◽  
Mammalian Cells ◽  
Experimental Treatment ◽  
The Body ◽  
Transmission Electron ◽  
Coated Plate ◽  
Living Material ◽  
Coated Surfaces ◽  
Triton X

Cells of many kinds adhere firmly to glass or plastic surfaces which have been pretreated with polylysine. The attachment takes place as soon as the cells make contact with the surfaces, and the flattening of the cells against the surfaces is quite rapid. Cells which do not normally adhere to solid surfaces, such as sea urchin eggs, attach as well as cells which normally do so, such as amebas or mammalian cells in culture. The adhesion is interpreted simply as the interaction between the polyanionic cell surfaces and the polycationic layer of adsorbed polylysine. The attachment of cells to the polylysine-treated surfaces can be exploited for a variety of experimental manipulations. In the preparation of samples for scanning or transmission electron microscopy, the living material may first be attached to a polylysine-coated plate or grid, subjected to some experimental treatment (fertilization of an egg, for example), then transferred rapidly to fixative and further passed through processing for observation; each step involves only the transfer of the plate or grid from one container to the next. The cells are not detached. The adhesion of the cell may be so firm that the body of the cell may be sheared away, leaving attached a patch of cell surface, face up, for observation of its inner aspect. For example, one may observe secretory vesicles on the inner face of the surface (3) or may study the association of filaments with the inner surface (Fig. 1). Subcellular structures may attach to the polylysine-coated surfaces. So far, we have found this to be the case for nuclei isolated from sea urchin embryos and for the microtubules of flagella, which are well displayed after the membrane has been disrupted by Triton X-100 (Fig. 2).

Cleavage in the chick embryo

Development ◽  
1978 ◽  
Vol 43 (1) ◽  
pp. 55-69
Author(s):  
Ruth Bellairs ◽  
F. W. Lorenz ◽  
Tania Dunlap
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chick Embryo ◽  
Cell Membrane ◽  
Cortical Region ◽  
Chick Embryos ◽  
Membrane Formation ◽  
Transmission Electron

Chick embryos ranging from the stage of first cleavage to that of about 700 cells were removed from the oviduct and examined by transmission electron microscopy. Beneath the cell membrane is a yolk-free cortical region containing microfilaments. Beneath this lies cytoplasm which contains yolk spheres which are graded in size, the dorsal ones being smaller than the ventral ones. The subgerminal periblast possesses a greater proportion of yolk to cytoplasm than do the cells proper, but it merges with the cytoplasm at the incomplete borders of the ‘open’ cells. Specialized accumulations of membranes lie in the marginal periblast, and it is suggested that they play a role in cell membrane formation.

Stress Relaxation Behavior of GH4169 Alloy

2020 ◽  
Vol 1013 ◽  
pp. 52-58
Author(s):  
Xu Dong Lu ◽  
Song Yi Shi ◽  
Bo Wen ◽  
Ya Wei Zhang ◽  
Jin Hui Du
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Stress Relaxation ◽  
Initial Stress ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Transmission Electron ◽  
Microscopy Techniques ◽  
The Relationship ◽  
Gh4169 Alloy

The relaxation properties of GH4169 alloy were studied contrastively at temperatures ranging from 600 oC to 700 °C and initial stress ranging from 550 MPa to 850 MPa. The relationship between the microstructure and relaxation behavior was evaluated using transmission electron microscopy techniques. It was found that the relaxation limit and relaxation stability of the alloy decreased obviously with the increase of temperature. Further investigations show that the relaxation behavior is mainly depend on both precipitate characteristics and its interaction with dislocations. The alloy with higher strength lever has more excellent stress relaxation stability, because of the inhibition of a large number subgrains on dislocations motion.

The Starting Members of the Series Pr4n+2(C2)nBr5n+5 (n = 1, 2, 3)

2009 ◽  
Vol 64 (8) ◽  
pp. 922-928 ◽  
Author(s):  
Manuel Christian Schaloske ◽  
Hansjürgen Mattausch ◽  
Viola Duppel ◽  
Lorenz Kienle ◽  
Arndt Simon
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystals ◽  
Lattice Parameters ◽  
Space Group ◽  
X Ray ◽  
Transmission Electron ◽  
General Series ◽  
Microscopy Techniques

The compounds Pr6(C2)Br10, Pr10(C2)2Br15 and Pr14(C2)3Br20 were prepared from PrBr3 and the appropriate amounts of Pr and C and characterized by X-ray structure analyses of single crystals. All three compounds crystallize in space group P1 with lattice parameters a = 7.571(2), b = 9.004(2), c = 9.062(2) Å ,α = 108.57(3), β = 97.77(3), γ = 106.28(3)◦ for Pr6(C2)Br10; a = 9.098(2), b = 10.127(2), c = 10.965(2) A° , α = 70.38(3), β = 66.31(3), γ = 70.84(3)◦ for Pr10(C2)2Br15; a = 9.054(2), b = 10.935(2), c = 13.352(3) Å , α = 86.27(3), β = 72.57(3), γ = 66.88(3)◦ for Pr14(C2)3Br20. They are members of a general series Ln4n+2(C2)nBr5n+5 and isostructural with the corresponding iodides known for Ln = La, Ce, Pr. Pr6(C2)Br10 was further characterized via transmission electron microscopy techniques

scholarly journals First identification of nanoparticles on thorax, abdomen and wings of the worker bee Apis dorsata Fabricius

2016 ◽  
Vol 60 (1) ◽  
pp. 87-96
Author(s):  
Atanu Bhattacharyya ◽  
Shashidhar Viraktamath ◽  
Fani Hatjina ◽  
Santanu Bhattacharyya ◽  
Bhaktibhavana Rajankar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
The Body ◽  
Apis Dorsata ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Calcium Phosphate Nanoparticles ◽  
First Time

Abstract The presence of nanoparticles on the body of the honeybee Apis dorsata Fabricius, was investigated for the first time to better understand the bee’s behaviour. These have been observed by using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and confirmed by Atomic Force Microscopy (AFM). Our study clearly denotes that the Indian rock honey bee Apis dorsata possess calcium silicate and calcium phosphate nanoparticles on its body surface of 5-50 nm in diameter. In particular, the nanoparticles on the abdomen and thorax of A. dorsata have an average diameter of about 10 nanometers and they are smaller than those found on wings of the same bees which are about 20 nanometers. The nanoparticles found are different of the ones previously observed on honey bees or other insects. The origin and role of these natural nanoparticles on the body of the Indian rock bee need to be to be further investigated; more research in the subject might raise important aspects in relation to the conservation of these unique pollinators.

The Creation and Annealing of Heavy Ion Damage in Silicon

1987 ◽  
Vol 93 ◽  
Author(s):  
L. M. Howe ◽  
M. H. Rainville
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Spatial Distribution ◽  
High Resolution ◽  
Heavy Ion ◽  
High Energy ◽  
Transmission Electron ◽  
Ion Damage ◽  
Deposited Energy ◽  
Microscopy Techniques

ABSTRACTHigh resolution transmission electron microscopy techniques have been used to obtain information on the contrast, spatial distribution, size and annealing behaviour of the damaged regions produced within individual collision cascades by heavy ion (As, Sb and Bi) bombardment (10–120 KeV) of silicon with 1.0 × 1011 – 6.0 × 1011 ions cm−2. The fraction of the theoretical cascade volume occupied by a heavily damaged region steadily increased as the average deposited energy density within the cascade increased. At high energy densities, the visible damage produced in the main cascade consisted of a single, isolated damaged region. With decreasing values of (i.e. increasing ion implant energies), there was an increasing tendency for multiple damaged regions to be produced within the main cascade.

scholarly journals Scanning Microscopy Techniques as an Assessment Tool of Materials and Interventions for the Protection of Built Cultural Heritage

Scanning ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-20 ◽  
Author(s):  
Antonia Moropoulou ◽  
Elisabetta Zendri ◽  
Pilar Ortiz ◽  
Ekaterini T. Delegou ◽  
Ioanna Ntoutsi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Assessment Tool ◽  
Scanning Microscopy ◽  
Spectroscopy Analysis ◽  
Built Heritage ◽  
Research Areas ◽  
Transmission Electron ◽  
Microscopy Techniques ◽  
Scanning Electron

Scanning microscopy techniques have emerged as powerful scientific tools for analysing materials of architectural or archaeological interest, since the commercialization of the first scanning electron microscopy instrumentation in the early 60s. This study is aimed at reviewing and highlighting the significance of several scanning microscopy techniques employed in the protection of built heritage. The diffusion of scanning electron microscopy with energy-dispersive X-ray spectroscopy analysis (SEM-EDX) is proven to be the widest among the available scanning microscopy techniques, while transmission electron microscopy (TEM) applications are steadily present in the field of built heritage protection. The building material characterization, the weathering mechanism investigation, and the development of compatible and performing conservation materials are some major research areas where the application of the aforementioned techniques is discussed. The range of techniques, along with aspects of instrumentation and sample preparation are, also, considered.

Role of Electron Microscopy in Semiconductor Electronic Defects Analysis

1985 ◽  
Vol 46 ◽  
Author(s):  
P. M. Petroff
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Transmission Electron ◽  
Semiconductor Electronic ◽  
Scanning Transmission ◽  
Electronic Defect ◽  
Defects Analysis ◽  
Microscopy Techniques ◽  
Electronic Defects

AbstractA review of the Transmission Electron Microscopy and Scanning Transmission Electron Microscopy techniques used for electronic defect identification is presented. The structural, chemical and STEM based spectroscopy methods for electronic defect analysis are discussed along with selected examples.

Sign in / Sign up

Export Citation Format

Share Document