A comparative study of elastic motions in trajectory tracking of flexible RPR planar manipulators moving with high speed

Robotica ◽  
2016 ◽  
Vol 35 (7) ◽  
pp. 1523-1540 ◽  
Author(s):  
Amirhossein Eshaghiyeh Firoozabadi ◽  
Saeed Ebrahimi ◽  
Josep M. Font-Llagunes
Keyword(s):  
High Speed ◽  
Dynamic Performance ◽  
Equations Of Motion ◽  
Parallel Manipulators ◽  
Differential Algebraic Equations ◽  
Body Motion ◽  
Inertial Forces ◽  
Algebraic Equations ◽  
Assumed Mode Method ◽  
Planar Manipulators

SUMMARYThe study of inertial forces effects at high speeds in flexible parallel manipulators, which generate undesired deviations, is a challenging task due to the coupled and complicated equations of motion. A dynamic model of the Revolute Prismatic Revolute (RPR) planar manipulators (specifically 3-RPR, 2-RPR and 1-RPR) with flexible intermediate links is developed based on the assumed mode method. The flexible intermediate links are modeled as Euler-Bernoulli beams with fixed-free boundary conditions. Using the Lagrange multipliers, a generalized set of differential algebraic equations (DAEs) of motion is developed. In the simulations, the rigid body motion of the end-effector is constrained by some moving constraint equations while the vibrations of the flexible intermediate links cause deviations from the desired trajectory. From this analysis, the dynamic performance of the manipulators when tracking a desired trajectory is evaluated. A comparison of the results indicates that in some cases, adding each extra RPR chain in the n-RPR planar manipulators with flexible intermediate links reduces the stiffness and accuracy due to the inertial forces of the flexible links, which is opposite to what would be expected. The study provides insights to the design, control and suitable selection of the flexible manipulators.

Dynamic characteristics of a 3-RPR planar parallel manipulator with flexible intermediate links

Robotica ◽  
2014 ◽  
Vol 33 (9) ◽  
pp. 1909-1925 ◽  
Author(s):  
Amirhossein Eshaghiyeh Firoozabadi ◽  
Saeed Ebrahimi ◽  
Ghasem Amirian
Keyword(s):  
Boundary Conditions ◽  
Dynamic Modeling ◽  
Parallel Manipulator ◽  
Initial Conditions ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
End Effector ◽  
Assumed Mode Method ◽  
Planar Parallel Manipulator

SUMMARYThis paper presents the dynamic modeling of a 3-RPR planar parallel manipulator with three flexible intermediate links in order to investigate the effects of the intermediate links flexibility on the undesired vibrations of the end-effector. For this purpose, the intermediate links are modeled as Euler--Bernoulli beams with two types of fixed-pinned and fixed-free boundary conditions based on the assumed mode method (AMM). The equations of motion of the 3-RPR manipulator are formulated using the augmented Lagrange multipliers method in the form of differential algebraic equations (DAEs) by incorporating the elastic and rigid coordinates in the set of generalized coordinates. After defining the initial conditions and imposing external forces to the manipulator, the equations are then solved numerically using the Modified Extended Backward-Differentiation Formula Implicit (MEBDFI) approach. Comparison of the simulation results for two different boundary conditions shows clearly the effects of flexibility of the intermediate links on the vibration of the end-effector trajectory. Results of this work can be used for the dynamic modeling of other manipulators or to design a controller for reducing the undesired vibrations.

Investigation of axial forces on dynamic properties of a flexible 3-PRR planar parallel manipulator moving with high speed

Robotica ◽  
2009 ◽  
Vol 28 (4) ◽  
pp. 607-619 ◽  
Author(s):  
Xuping Zhang ◽  
James K. Mills ◽  
William L. Cleghorn
Keyword(s):  
Parallel Manipulator ◽  
High Speed ◽  
Dynamic Properties ◽  
Parallel Manipulators ◽  
Body Motion ◽  
Valuable Insight ◽  
Bending Vibration ◽  
Assumed Mode Method ◽  
Axial Forces ◽  
Planar Parallel Manipulator

SUMMARYThe effect of axial forces on the dynamic properties is formulated and investigated for a 3-PRR planar parallel manipulator with three flexible intermediate links. A dynamic model of the manipulator system is developed based on the assumed mode method with the consideration of the effect of longitudinal forces on lateral stiffness is included. The flexible intermediate links are modeled as Euler–Bernoulli beams with pinned-pinned boundary conditions, which are verified by experimental modal tests. Natural frequencies of bending vibration of the intermediate links are derived as the functions of axial force and rigid-body motion of the manipulator. Dynamic behavior including the effect of axial forces on lateral deformation is investigated, and configuration-dependant frequencies are analyzed. Numerical simulations of configuration-dependent frequency properties and axial forces are performed to illustrate the effect of axial forces on the dynamic behaviors of the flexible parallel manipulator. Simulation results of mode amplitudes, deformations, axial forces, inertial, and coupling forces are presented, and further validate the theoretical derivations. These analyses and results provide a new and valuable insight to the design and control of the parallel manipulators with flexible intermediate links.

Analytical Modelling of the Dynamics of the Four-Bar Mechanism: A Comparison of Some Methods

2018 ◽  
Author(s):  
J. P. Meijaard ◽  
V. van der Wijk
Keyword(s):  
Virtual Work ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Force Balance ◽  
Dynamic Force ◽  
Algebraic Equations ◽  
Principle Of Virtual Work ◽  
Principal Vector ◽  
Reaction Forces ◽  
Principal Points

Some thoughts about different ways of formulating the equations of motion of a four-bar mechanism are communicated. Four analytic methods to derive the equations of motion are compared. In the first method, Lagrange’s equations in the traditional form are used, and in a second method, the principle of virtual work is used, which leads to equivalent equations. In the third method, the loop is opened, principal points and a principal vector linkage are introduced, and the equations are formulated in terms of these principal vectors, which leads, with the introduced reaction forces, to a system of differential-algebraic equations. In the fourth method, equivalent masses are introduced, which leads to a simpler system of principal points and principal vectors. By considering the links as pseudorigid bodies that can have a uniform planar dilatation, a compact form of the equations of motion is obtained. The conditions for dynamic force balance become almost trivial. Also the equations for the resulting reaction moment are considered for all four methods.

scholarly journals Assessment of Linearization Approaches for Multibody Dynamics Formulations

2017 ◽  
Vol 12 (4) ◽  
Author(s):  
Francisco González ◽  
Pierangelo Masarati ◽  
Javier Cuadrado ◽  
Miguel A. Naya
Keyword(s):  
Mechanical System ◽  
Multibody Dynamics ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Practical Applications ◽  
Linearization Methods ◽  
Highly Nonlinear ◽  
Wide Range ◽  
The Way

Formulating the dynamics equations of a mechanical system following a multibody dynamics approach often leads to a set of highly nonlinear differential-algebraic equations (DAEs). While this form of the equations of motion is suitable for a wide range of practical applications, in some cases it is necessary to have access to the linearized system dynamics. This is the case when stability and modal analyses are to be carried out; the definition of plant and system models for certain control algorithms and state estimators also requires a linear expression of the dynamics. A number of methods for the linearization of multibody dynamics can be found in the literature. They differ in both the approach that they follow to handle the equations of motion and the way in which they deliver their results, which in turn are determined by the selection of the generalized coordinates used to describe the mechanical system. This selection is closely related to the way in which the kinematic constraints of the system are treated. Three major approaches can be distinguished and used to categorize most of the linearization methods published so far. In this work, we demonstrate the properties of each approach in the linearization of systems in static equilibrium, illustrating them with the study of two representative examples.

Trajectory Tracking of Underactuated Multibody Systems

2011 ◽  
Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner
Keyword(s):  
Trajectory Tracking ◽  
Multibody Systems ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Feedforward Control ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Differential Algebraic Equations ◽  
State Variables ◽  
Algebraic Equations

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.

scholarly journals Numerical solution for consistent initial conditions of constrained mechanical systems

2003 ◽  
Vol 25 (3) ◽  
pp. 170-185
Author(s):  
Dinh Van Phong
Keyword(s):  
Numerical Solution ◽  
Initial Conditions ◽  
Equations Of Motion ◽  
Mechanical Systems ◽  
Differential Algebraic Equations ◽  
System Of Equations ◽  
Algebraic Equations ◽  
Flexible Approach ◽  
Constrained Mechanical Systems ◽  
Consistent Initial Values

The article deals with the problem of consistent initial values of the system of equations of motion which has the form of the system of differential-algebraic equations. Direct treating the equations of mechanical systems with particular properties enables to study the system of DAE in a more flexible approach. Algorithms and examples are shown in order to illustrate the considered technique.

Automating the Derivation of the Equations of Motion of a Multibody Dynamic System With Uncertainty Using Polynomial Chaos Theory and Variational Work

2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Paul S. Ryan ◽  
Sarah C. Baxter ◽  
Philip A. Voglewede
Keyword(s):  
Chaos Theory ◽  
Polynomial Chaos ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Multibody Dynamic ◽  
Mass Spring ◽  
Polynomial Chaos Theory ◽  
Multibody Dynamic System ◽  
Crank Mechanism

Abstract Understanding how variation impacts a multibody dynamic (MBD) system's response is important to ensure the robustness of a system. However, how the variation propagates into the MBD system is complicated because MBD systems are typically governed by a system of large differential algebraic equations. This paper presents a novel process, variational work, along with the polynomial chaos multibody dynamics (PCMBoD) automation process for utilizing polynomial chaos theory (PCT) in the analysis of uncertainties in an MBD system. Variational work allows the complexity of the traditional PCT approach to be reduced. With variational work and the constrained Lagrangian formulation, the equations of motion of an MBD PCT system can be constructed using the PCMBoD automated process. To demonstrate the PCMBoD process, two examples, a mass-spring-damper and a two link slider–crank mechanism, are shown.

Application of Scaling to Multibody Dynamics Simulations

2015 ◽  
Author(s):  
William Prescott
Keyword(s):  
Equations Of Motion ◽  
Industrial Applications ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Step Size ◽  
Virtual Lab ◽  
Long Run ◽  
Multibody Dynamic ◽  
Dynamics Simulations ◽  
Stability Issues

This paper will examine the importance of applying scaling to the equations of motion for multibody dynamic systems when applied to industrial applications. If a Cartesian formulation is used to formulate the equations of motion of a multibody dynamic system the resulting equations are a set of differential algebraic equations (DAEs). The algebraic components of the DAEs arise from appending the joint equations used to model revolute, cylindrical, translational and other joints to the Newton-Euler dynamic equations of motion. Stability issues can arise in an ill-conditioned Jacobian matrix of the integration method this will result in poor convergence of the implicit integrator’s Newton method. The repeated failures of the Newton’s method will require a small step size and therefore simulations that require long run times to complete. Recent advances in rescaling the equations of motion have been proposed to address this problem. This paper will see if these methods or a variant addresses not only stability concerns, but also efficiency. The scaling techniques are applied to the Gear-Gupta-Leimkuhler (GGL) formulation for multibody problems by embedding them into the commercial multibody code (MBS) Virtual. Lab Motion and then use them to solve an industrial sized automotive example to see if performance is improved.

Sign in / Sign up

Export Citation Format

Share Document