scholarly journals Scanning and Transmission Electron Microscopy of the Ependymal Lining of the Third Ventricle

1974 ◽  
Vol 1 (1) ◽  
pp. 59-73 ◽  
Author(s):  
J.E. Bruni
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Third Ventricle ◽  
Three Dimensional ◽  
Single Layer ◽  
Ependymal Cells ◽  
Ultrastructural Studies ◽  
The Third ◽  
Functional Involvement ◽  
Scanning Electron

SUMMARYIn its simplest form, the ependyma of the third ventricle consists of a single layer of cuboidal cells. Although these typical mural cells constitute the greater part of the lining of the ventricle, a specialized variety of ependymal cell (the tanycyte) can also be distinguished within circumscribed areas of the ventricular wall. Although such cells are found scattered throughout the dorsoventral extent of the third ventricle, they are particularly numerous along the ventrolateral walls and floor. The regional variation in the surface morphology of the ventricle walls as evident with the scanning electron microscope is consistent with this pattern of tanycyte distribution. Ultrastructural studies have established that the tanycyte is a fundamentally distinct cell with a long basal process extending into the subjacent neuropil and frequently directed toward a capillary wall. This unique morphology conforms closely to its three-dimensional appearance as demonstrated with the scanning electron microscope. The significance of ependymal tanycytes particularly of the third ventricle derives largely from the connections they establish between the ventricular lumen and vasculature of the median eminence. This intriguing structural relationship has led to the suggestion that ependymal cells and cerebrospinal fluid of the third ventricle may be involved in the regulation of adenohypophysial activity. Evidence indicating the functional involvement of specialized ependymal cells in the neuroendocrine control of pituitary activity is reviewed.

Microstructures of Low Angle Boundaries of the Second Generation Single Crystal Superalloy DD6

2011 ◽  
Vol 284-286 ◽  
pp. 1584-1587
Author(s):  
Zhen Xue Shi ◽  
Jia Rong Li ◽  
Shi Zhong Liu ◽  
Jin Qian Zhao
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Thin Layer ◽  
Single Crystal ◽  
Second Generation ◽  
Three Dimensional ◽  
Single Crystal Superalloy ◽  
Transition Electron ◽  
Scanning Electron

The specimens of low angle boundaries were machined from the second generation single crystal superalloy DD6 blades. The microstructures of low angle boundaries (LAB) were investigated from three scales of dendrite, γ′ phase and atom with optical microscopy (OM), scanning electron microscope (SEM), transition electron microscope (TEM) and high resolution transmission electrion microscopy (HREM). The results showed that on the dendrite scale LAB is interdendrite district formed by three dimensional curved face between the adjacent dendrites. On the γ′ phase scale LAB is composed by a thin layer γ phase and its bilateral imperfect cube γ′ phase. On the atom scale LAB is made up of dislocations within several atom thickness.

scholarly journals Three-dimensional Observation of the Rat Endocrine Pancreas by a Scanning Electron Microscope

1990 ◽  
Vol 12 (3) ◽  
pp. 315-322 ◽  
Author(s):  
Masanori HISAOKA ◽  
Joji HARATAKE ◽  
Osamu YAMAMOTO ◽  
Akio HORIE
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Endocrine Pancreas ◽  
Three Dimensional ◽  
Scanning Electron

scholarly journals Ultrastructure of Human Fertile Hydatid Cysts Using a Scanning Electron Microscope (SEM)

2020 ◽  
Vol 1 (3) ◽  
pp. 52-55
Author(s):  
Hadi M. Hamza Al-Mayali ◽  
Hind A. Abdul Kadhim
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Three Dimensional ◽  
Zoonotic Diseases ◽  
Hydatid Cysts ◽  
Germinal Layer ◽  
Transmission Electron ◽  
The World ◽  
Laminated Layer ◽  
Scanning Electron

Introduction: Echinococcosis and hydatidosis caused by the metacestode of Echinococcus granulosus are among the most important zoonotic diseases in the world. This study aims to study the ultrastructure of fertile hydatid cysts that infect humans using a scanning electron microscope (SEM). Materials and Methods: Twenty samples of human fertile hydatid cysts were collected from the human liver and lung after performing surgery operations and examined with an SEM. Results: The results of the electron microscopy with different magnifications revealed that the laminated layer (LL) consists of sheets that appeared more compact and aligned. The brood capsules appeared, consisting of a net of finger-shaped structures that emerged from bulges of various sizes and shapes. Conclusion: Under a transmission electron microscope, it was found that the LL had a coherent and flexible structure, settling on a three-dimensional microscopic network of hydrophilic fibers, with high humidity. These fibers were arranged irregularly and had a diameter of about 10 nm; therefore, the fibers adjacent to the germinal layer (GL) were possibly attached to microtriches of tegument, which reached a thickness of 1 mm in the LL.

Highly sensitive compression sensors using three-dimensional printed polydimethylsiloxane/carbon nanotube nanocomposites

2019 ◽  
Vol 30 (8) ◽  
pp. 1216-1224 ◽  
Author(s):  
Mohammad Charara ◽  
Mohammad Abshirini ◽  
Mrinal C Saha ◽  
M Cengiz Altan ◽  
Yingtao Liu
Keyword(s):  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Carbon Nanotube ◽  
Scanning Electron Microscope ◽  
Three Dimensional ◽  
Multi Walled Carbon Nanotube ◽  
Highly Sensitive ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This article presents three-dimensional printed and highly sensitive polydimethylsiloxane/multi-walled carbon nanotube sensors for compressive strain and pressure measurements. An electrically conductive polydimethylsiloxane/multi-walled carbon nanotube nanocomposite is developed to three-dimensional print compression sensors in a freestanding and layer-by-layer manner. The dispersion of multi-walled carbon nanotubes in polydimethylsiloxane allows the uncured nanocomposite to stand freely without any support throughout the printing process. The cross section of the compression sensors is examined under scanning electron microscope to identify the microstructure of nanocomposites, revealing good dispersion of multi-walled carbon nanotubes within the polydimethylsiloxane matrix. The sensor’s sensitivity was characterized under cyclic compression loading at various max strains, showing an especially high sensitivity at lower strains. The sensing capability of the three-dimensional printed nanocomposites shows minimum variation at various applied strain rates, indicating its versatile potential in a wide range of applications. Cyclic tests under compressive loading for over 8 h demonstrate that the long-term sensing performance is consistent. Finally, in situ micromechanical compressive tests under scanning electron microscope validated the sensor’s piezoresistive mechanism, showing the rearrangement, reorientation, and bending of the multi-walled carbon nanotubes under compressive loads, were the main reasons that lead to the piezoresistive sensing capabilities in the three-dimensional printed nanocomposites.

The Nano Membrane-Like Structure of the Precambrian Microfossils under Atomic Force Microscope (AFM)

2007 ◽  
Vol 121-123 ◽  
pp. 739-742 ◽  
Author(s):  
H.M. Chi ◽  
Z.D. Xiao ◽  
Xin Xing Xiao
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Atomic Force Microscope ◽  
Early Life ◽  
Three Dimensional ◽  
New Method ◽  
Subcellular Structure ◽  
Atomic Force ◽  
Fossil Embryos ◽  
Scanning Electron

Weng`an fauna in Guizhou, China provides a unique window for the evolution of the early life especially since the animal embryos and sponge is found there. Phosphatization makes the fossils preserve in details including cells and subcellular structure. Here we use atomic force microscope observing the surface of some three dimensional preserved embryo fossils and the ultra membrane-like structure is found under atomic force microscope (AFM) while such structure can`t be found under scanning electron microscope (SEM). The membrane-like structure is approximately 10nm in thickness which maybe one part of the fossil embryos or belong to another nano scale microfossils. Therefore, AFM provides a new method for the study of the ultra structure of the microfossils from Weng`an fauna.

Sign in / Sign up

Export Citation Format

Share Document